Texas Instruments

Texas Instruments LMK04111SQX/NOPB is a dual-channel clock conditioner with integrated PLL, targeting SDH and SONET applications in a 48-pin WQFN package. RoHS-compliant with lead-free e3 finish. Available from stock with worldwide shipping.

LM3S1751-IBZ50-A2 by Texas Instruments is a 32-bit ARM Cortex-M3 microcontroller with 128 KB Flash, integrated ADC, and on-chip peripherals in a 108-pin BGA package. It runs at up to 50 MHz and includes USB, SSI, UART, and I2C interfaces for embedded control applications. Available worldwide with fast shipping from authorized distributors.

The LMK04011BISQ/NOPB is a low-noise clock synthesizer and jitter cleaner from Texas Instruments with a 1430 MHz to 1570 MHz VCO and 5 LVPECL/2VPECL differential outputs. It features a differential mux input and PLL-based architecture in a 48-pin WQFN package rated -40°C to 85°C. Available from stock worldwide.

Voltage Feedback Amplifier Circuit Push-Pull, Rail-to-Rail 8-SOIC

Texas Instruments UCC2819 average current-mode power factor correction controller operating up to 250 kHz in 16-pin SOIC package. Accepts 10.3V to 17V supply and drives boost PFC stages for high-efficiency AC-DC power conversion. Available from stock with worldwide shipping.

https://www.ti.com/lit/gpn/cd54hc173

The UCC39002P is a current-mode load share controller IC from Texas Instruments housed in an 8-pin DIP package. It operates up to 14.25V and enables parallel power supply current sharing with adjustable threshold control. Available from stock worldwide at competitive pricing for power system designers.

LM27213SQX/NOPB

Texas Instruments LM3S1911 is a 32-bit ARM Cortex-M3 microcontroller with 256KB Flash, operating at 50 MHz, in a 108-ball BGA package, featuring JTAG boundary scan and rich connectivity peripherals for industrial control.

The LM6588MAX/NOPB is a quad 24 MHz voltage-feedback operational amplifier from Texas Instruments optimized for TFT LCD panel drive applications. It operates on a 16 V supply with high output current capability and a 75 dB minimum CMRR. Available in a small-outline package with RoHS-compliant, lead-free finish for industrial and display designs.

Four-channel, differential output, transimpedance amplifier with integrated multiplexing

CMOS Amplifier Circuit Differential, Rail-to-Rail 14-SOIC

IC MCU 32BIT 256KB FLASH 108BGA

LM2833ZMYX/NOPB is a current-mode PWM buck regulator from Texas Instruments delivering up to 3 A output from a 3 V to 5.5 V input, with adjustable output from 0.6 V, in a 10-pin MSOP package.

SN74AHC595PW-P is an 8-bit serial-in parallel-out shift register with 3-state output latches from TI's AHC logic family, operating at up to 40 MHz clock frequency in a 16-pin TSSOP package. It supports 2 V to 5.5 V supply voltage with 50 pF load capacitance and 8 mA output sink current per pin, enabling cascading multiple devices for GPIO expansion. RoHS-compliant, available in stock worldwide with fast shipping.

ARM® Cortex®-M3 series Microcontroller IC 32-Bit 50MHz 256KB (256K x 8) FLASH 108-BGA (10x10)

LM3S1138-IBZ50-A2T is a 32-bit ARM Cortex-M3 microcontroller by Texas Instruments running at up to 50 MHz with 64 KB of on-chip flash memory. Key specs: integrated ADC, boundary scan support, 108-ball BGA package in a 10 x 10 mm footprint. Available from stock with worldwide shipping.

Retimer Interface 101-FCCSP (6x6)

The PLM393LVQPWRQ1 is an AEC-Q100 automotive-qualified dual low-voltage comparator from Texas Instruments featuring open-drain outputs, 5 nA maximum input bias current, and 2 mV maximum input offset voltage in an 8-pin SOIC package. It operates across automotive temperature and supply ranges for reliable signal comparison in vehicle systems. Suited for threshold detection, window comparator circuits, and battery monitoring in automotive and industrial applications.

Texas Instruments LM2901NS is a quad differential comparator operating up to 30 V supply with open-collector outputs and 0.25 µA bias current. The 14-pin SOIC package houses 4 independent comparator channels suited for threshold detection and logic-level conversion in industrial systems.

Use the download button to access the LM3150MHX/J7002527 schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 150 KHZ 1A STEP-DOWN VLTG REG

Automotive-grade quadruple operational amplifier in 14-TSSOP package, rated for -40°C to 125°C. Features single-supply operation from 3 V to 32 V with low supply current of 0.7 mA per amplifier. Available in tape-and-reel format for automated assembly.

Buck Regulator Positive Output Step-Down - DC-DC Controller IC 14-TSSOP

The DRA718BJGCBDRQ1 is an AEC-Q100-qualified automotive-grade applications processor from Texas Instruments, designed for in-vehicle infotainment and cluster systems operating at 1.11 V to 1.2 V core supply in a 538-ball FCBGA package. It combines multi-core processing, hardware safety features, and rich multimedia interfaces for next-generation automotive cockpit platforms.

Transceiver, Non-Inverting 1 Element 8 Bit per Element 3-State Output 20-SOIC

NJK

TPS2065CDGNR is a single-channel USB power switch from Texas Instruments supporting 1.0 A continuous current with a 4.5 V to 5.5 V input range and active-high enable. Includes output discharge and overcurrent protection in an 8-pin MSOP package. Available from stock with worldwide shipping.

The DS90UR906QSQX/NOPB is an automotive-grade FPD-Link III 9-channel LVDS serializer/deserializer from Texas Instruments, supporting high-speed differential data transmission for camera and display links. Housed in a 60-pin VQFN package with 0.8 mm maximum height, it is designed for ADAS and infotainment systems requiring robust serial video transport.

RTV

HVQCCN, LCC40,.24SQ,20

LVDS Interface IC

IC SERIALIZER LVDS LP 48WQFN

Bipolar Motor Driver NMOS PWM 28-HTSSOP

Use the download button to access the DRV8220DSGR schematic symbol, PCB footprint, and 3D model.

Texas Instruments DRV8804PWP-P is a quad low-side motor driver with 60 V rating, 2.3 A per channel, and SPI serial control interface in a 24-pin HTSSOP package. It drives four independent loads such as solenoids, relays, or stepper motor windings. Available in stock worldwide with competitive pricing.

Buffer, Non-Inverting 1 Element 10 Bit per Element 3-State Output 24-SSOP

DRA797BHGCBDRQ1 is an AEC-Q100 automotive-grade infotainment applications processor from Texas Instruments in a 538-ball PBGA package. It integrates multi-core processing with 1.2 V supply and supports automotive-grade operation from -40 °C to 105 °C for in-vehicle infotainment and ADAS applications. Available from stock worldwide with fast shipping.

The DRA793BDGCBDQ1 is an AEC-Q100 qualified automotive-grade ARM Cortex-A15 SoC processor from Texas Instruments running at 500 MHz with integrated DSP for audio amplifier applications, housed in a 538-pin FCBGA package rated from -40 to 125 degrees Celsius. It supports 1.2V maximum supply voltage and 260-degree Celsius peak reflow temperature for lead-free assembly. Available from authorized distributors with in-stock inventory and worldwide shipping for automotive and industrial designs.

Use the download button to access the DRV8220DRLR schematic symbol, PCB footprint, and 3D model.

The CD54HC4020F is a high-speed CMOS 14-stage binary ripple counter in a ceramic 16-pin DIP package from Texas Instruments. It operates from 2 V to 6 V supply with 50 pF load capacitance and provides 12 accessible output stages. Available from stock with worldwide shipping.

1000BASE-T1 AUTOMOTIVE ETHERNET

Use the download button to access the DAC8831MCDEP schematic symbol, PCB footprint, and 3D model.

16 Bit Digital to Analog Converter 4 144-FCBGA (10x10)

12 Bit Digital to Analog Converter 1 28-SOIC

Texas Instruments SN74LVC86APWR-P is a quad 2-input XOR gate operating from 1.65 V to 3.6 V supply, with 5 V tolerant inputs and propagation delays as low as 3.5 ns in a 14-pin TSSOP package. Available from stock with worldwide shipping.

RHB32

Buffer, Non-Inverting 2 Element 4 Bit per Element 3-State Output 20-SOIC

TLE2021AMJGB is a precision voltage-feedback operational amplifier by Texas Instruments featuring 110 dB typical CMRR and a maximum bias current of 0.09 µA. Key specs: 85 dB minimum CMRR, 6 nA input offset current, ceramic DIP package. From $4.50, in stock with worldwide shipping.

12 Bit Digital to Analog Converter 4 20-SSOP