amplifiers
amplifiers components are essential building blocks in modern electronic systems. FindMyChip sources amplifiers ICs from authorized China distributors with competitive pricing and reliable stock.
63 components
How to Choose amplifiers Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
amplifiers Guides & Articles
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
AD7607BSTZ Application Note: 8-Channel Simultaneous Sampling ADC Design Guide
Complete design guide for the AD7607BSTZ 8-channel 14-bit simultaneous-sampling ADC: power supply, grounding, anti-aliasing, interface, and common pitfalls.
May 31, 2026
24LC01B-I/SN Selection Guide: How to Choose the Right Microchip I2C EEPROM Variant
Compare 24LC01B-I/SN, MSOP-8, SOT-23-5, and other Microchip 1 Kbit I2C EEPROM variants. Pick the right package, temp grade, and stocking option for your design.
May 31, 2026
All amplifiers Components
Showing 1–50 of 63
Texas Instruments LMV112 single-channel low-noise op-amp with 3.6MHz GBW, 10nV/√Hz noise, 1.8–5.5V supply in WSON-6. From $0.86 in stock with worldwide shipping.
Texas Instruments LMH6553 differential amplifier and ADC driver with 900MHz bandwidth, 4100V/µs slew rate, and 3-12V supply range. From $3.365/unit in stock with worldwide shipping.
LMC6482IN/NOPB is a dual CMOS rail-to-rail input/output op-amp with 1.5MHz GBW, <2pA input bias current, and 3-15.5V supply range. From $2.34 in stock with worldwide shipping.
Texas Instruments LM6144BIN/NOPB quad rail-to-rail op-amp with 17MHz GBW, 25V/µs slew rate, and 2.7–24V supply range in DIP-14 package. From $4.33 in stock with worldwide shipping.
Texas Instruments INA322 single-supply micropower instrumentation amplifier with selectable gain (5 or 20), 55µA supply current, 2.7–5.5V supply range, MSOP-8 package. From $1.84 in stock with worldwide shipping.
BUF634P is a 250MHz wideband unity-gain buffer amplifier by Texas Instruments in DIP-8 package, with 2000V/µs slew rate and ±15V supply. Priced from $8.93, in stock, ships globally, MOQ 1.
The LM13700MX/NOPB is a dual OTA (Operational Transconductance Amplifier) by Texas Instruments with linearizing diodes; supply voltage plus or minus 2V to 18V, bandwidth 2MHz, 16-pin SOIC package. Starting at $0.29/unit. In stock, MOQ 1, ships worldwide.
THS7001IPWP is a programmable video filter amplifier from Texas Instruments in TSSOP-14, operating -40°C to 85°C, from $6.25/unit. In stock, inquiry welcome, global shipping.
OPA2333AQDRQ1 is a dual zero-drift rail-to-rail CMOS op-amp from Texas Instruments, AEC-Q100 automotive-qualified, with 350μV max offset, 35kHz bandwidth, 1.8V–5.5V supply. From $2.59/unit, in stock, 1pc MOQ, ships worldwide.
OPA547F/500 is a high-voltage high-current op-amp with 500mA output and ±30V supply, DDPAK-5. From $4.70 at 64+pcs. In stock, ships globally.
LMV796MF/NOPB is a TI 17MHz GBW low-noise CMOS op-amp in SOT-23-5. Supply 2.7–5.5V, Iq 1.3mA, input noise 5.8nV/√Hz. In stock from $0.579/unit (300+ pcs), global shipping.
LMV772MA/NOPB is a TI dual rail-to-rail output op-amp with 3MHz GBW, 1.3mA supply, 2.7V-5V supply range; from $1.35/unit, in stock, ships globally.
The LMV641MGE/NOPB is a single-channel rail-to-rail output op-amp from Texas Instruments in a 5-pin SOT-23 package, operating on 2.7–5V supply with 1.5MHz GBW and 90µA quiescent current. Priced from $1.43, available for inquiry with global shipping.
LM4889MA/NOPB is a 1W mono audio power amplifier with click/pop suppression and 2.2-5.5V supply, SOIC-8. From $0.61 at 100K+pcs. In stock, ships globally.
LM4876M/NOPB is a 2.4W mono Boomer audio amplifier with selectable 6/12dB gain and click-free, SOIC-8. From $0.61 at 100K+pcs. In stock, ships globally.
LM4871M/NOPB is a 3W mono Boomer audio amplifier with shutdown and click/pop suppression, SOIC-8. From $0.20 at 1510+pcs. In stock, ships globally.
INA2134UAE4 is a dual unity-gain audio differential receiver with 90dB CMRR, SOIC-8 package. From $0.56 at 100K+pcs. In stock, ships globally.
INA122U is a precision instrumentation amplifier in SOIC-8 from Texas Instruments with 25μV max offset, 100dB CMRR, and ±2.25V–±18V supply. Priced from $3.65, in stock, ships globally, 1 piece minimum.
OPA227UA is a precision low-noise op-amp by Texas Instruments with 8MHz GBW, 3nV noise, +/-18V supply, in SOIC-8 package. From $3.75/unit, in stock, ships globally, MOQ 1.
NE5534ADR is a low-noise single op-amp by Texas Instruments in SOIC-8 package, featuring 9nV/√Hz voltage noise and 10MHz GBW. Priced from $0.65, in stock, ships globally, MOQ 1.
TLV2462IDGK is a TI dual rail-to-rail op-amp with 6.4MHz GBW, 2.7-6V supply in MSOP-8 for sensor and signal conditioning. From $1.20 at 10K+ qty, in stock worldwide.
OPA452FAKTWT is a Texas Instruments high-voltage power op-amp with +/-40V supply, 50mA output current, and 1.8MHz bandwidth in TO-263-5 package. In stock from $7.83/pc, 1pc MOQ, global shipping.
INA148UA is a TI precision difference amplifier with unity gain, 100dB CMRR, wide supply range, and SOIC-8 package — from $1.23, in-stock, 1-piece MOQ, ships worldwide.
OPA602AU is a high-speed FET-input precision op-amp by Texas Instruments with 6.5MHz bandwidth, 35V/us slew rate, and 1pA bias current in SOIC-8, ideal for data acquisition and active filters. From $8.10, in-stock, ships globally, MOQ 1.
OPA404KU is a Texas Instruments quad FET-input op-amp with 14-pin ceramic DIP package, offering low offset voltage, 6.5 MHz bandwidth, and single-supply operation. Starts at $16.68/unit, 1-piece MOQ, in-stock, ships worldwide.
INA105KU is a precision unity-gain differential amplifier by Texas Instruments in SOIC-8, featuring 86dB CMRR, ±15V supply, −40°C to 85°C; from $4.32, in-stock, ships globally, 1-piece MOQ.
TLV2401IDBVT is a Texas Instruments micropower single op-amp with 1µA supply current, rail-to-rail output, SOT-23-5 package. In stock from $0.84, 1 pc minimum, ships worldwide.
OPA357AIDBVT is a 250MHz GBW single-supply rail-to-rail output op-amp from Texas Instruments in SOT-23-5. Operates 2.5V to 5.5V, -40 to +125C. In stock from $1.55/unit, 1-piece MOQ, worldwide shipping.
PGA309AIPWT is a programmable gain amplifier with on-chip DAC for sensor offset/gain calibration, 16-pin TSSOP, -40°C to 85°C, from $2.85/unit. In stock, inquiry welcome.
INA121UA is a precision FET-input instrumentation amplifier from Texas Instruments in SO-8 package, gain 1-10000 V/V, 800uV offset, priced from $2.91; in stock, 1 pc minimum, ships worldwide.
THS4130IDGN is a fully differential high-speed op-amp by Texas Instruments in 8-pin MSOP package. Operates -40°C to 85°C. Priced from $6.13, in stock, 1 pc minimum order, worldwide shipping.
OPA2354AIDDA is a dual 250MHz rail-to-rail I/O CMOS op-amp from Texas Instruments in MSOP-8 package, operating on 1.8V to 5.5V, rated -40C to +125C. In stock from $1.33, 1-piece minimum, global shipping.
THS4631D is a 215MHz high-speed voltage feedback op-amp from Texas Instruments in SOIC-8 package, with 635V/us slew rate and +/-15V supply range. In stock from $8.58, 1pc MOQ, ships worldwide.
OPA551UA is a high-voltage op-amp from Texas Instruments supporting +-30V supply, 200mA output current, and 3MHz GBW in SOIC-8 package. Starting at $1.75, in-stock, ships globally, min order 1 unit.
OPA137U is a FET-input, unity-gain stable precision op-amp by Texas Instruments in SOIC-8 package, offering 3MHz bandwidth, 7nV/rtHz noise, and 1.5mA supply current. From $1.72, in-stock, ships globally.
INA133UA/2K5E4 is a precision unity-gain difference amplifier by Texas Instruments in SOIC-8, featuring 80dB CMR, supply range 4.5V to 36V, operating -40C to +125C. From $4.45/unit, in stock, ships globally, 1 pc MOQ.
INA133UA/2K5 is a precision difference amplifier from Texas Instruments with unity gain (G=1 V/V), 80dB CMRR, and 100kHz bandwidth in a compact SOT-23-5 package. Priced from $1.71, in stock, 1-piece MOQ, worldwide shipping.
OPA2137U is a dual precision FET-input op-amp by Texas Instruments with 8 MHz GBW, 5 nV/√Hz noise, and ±15 V supply. From $1.71, in stock, ships globally, 1 pc minimum.
INA2133UAE4 is a dual rail-to-rail difference amplifier from Texas Instruments in UQFN-8 package, operating on 5V supply with ±15V input range. Priced from $2.39/unit (200+), in-stock with global shipping, 1pc inquiry available.
TL032ID is a dual low-power op-amp by Texas Instruments in SOIC-8, with 1MHz GBW, ±18V supply, and -40°C to 85°C range. Priced from $0.46, in stock, MOQ 300, ships globally.
THS4140ID is a Texas Instruments fully differential amplifier with 160MHz bandwidth, ±15V supply, 45V/μs slew rate, priced from $7.23 in SOIC-8 package. In stock, 1-piece MOQ, ships worldwide.
OPA698ID is a wideband current-feedback op-amp by Texas Instruments with 1.7GHz GBP, disable function, ±5V–±15V supply, SOIC-8 package. From $4.62, in-stock, ships from 1 pcs worldwide.
TLC074AID is a quad rail-to-rail JFET-input op-amp from Texas Instruments, 3MHz GBW, 10mV max offset voltage, 0-70C, SOIC-14. From $1.78/unit, in-stock, ships globally, 1-piece minimum.
THS4131ID is a fully differential high-speed op-amp from Texas Instruments with 150MHz GBW, ±15V supply range, and 6.5nV/√Hz input noise. Priced from $6.00, in-stock, 1-piece MOQ, ships worldwide.
OPA2350UA is a dual rail-to-rail output CMOS op-amp by Texas Instruments featuring 38MHz GBW, 22V/μs slew rate, and 2.7V–5.5V single-supply; priced from $0.78/unit, in stock, 1-piece MOQ, ships worldwide.
INA129UA is a precision instrumentation amplifier by Texas Instruments in SOIC-8, gain 1-10000 via single resistor, +/-15V supply, from $6.25/10pcs, in stock, ships worldwide.
TLC2272ID is a dual rail-to-rail output op-amp from Texas Instruments, 2.7V to 16V supply, 2.18MHz bandwidth, 8-SOIC package, -40 to 125 deg C. From $0.86, in-stock, ships globally, 1 pc MOQ.
THS3001ID is a 1.9 GHz current feedback op-amp from Texas Instruments in SOIC-8 package, featuring 6500 V/µs slew rate and ±15V supply. Starting at $6.15/unit with stock available, minimum order 1 piece, worldwide shipping.
THS4031CD is a high-speed, low-noise op-amp by Texas Instruments with 100MHz GBW, 43mA supply current, and SOIC-8 package. Priced from $3.43, in-stock, 1pc MOQ, ships worldwide.
INA118U is a precision instrumentation amplifier by Texas Instruments in SOIC-8 package, featuring 110dB CMRR, 50µV max offset voltage, gain set by single resistor from 1 to 10000. Priced from $3.03, available for immediate inquiry, ships globally, MOQ 1.