Texas Instruments

Use the download button to access the SN74HC138PWT schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - MCP6292IDGKT - Operational Amplifier, 2 Amplifier, 10 MHz, 6.5 V/µs, 2.4V to 5.5V, VSSOP, 8 Pins

Texas Instruments CD4511BMN is a BCD-to-7-segment latch/decoder/driver IC in a 16-pin DIP package. Features latched BCD input with 50 pF load capacitance and true output polarity for direct LED display drive. In stock globally with competitive pricing and worldwide shipping.

Switching Controllers Low-Power BiCMOS Current-Mode PWM

Operational Amplifiers - Op Amps Dual Hi-Sp Lo-Noise Op Amp

Low power, high voltage window comparator with integrated reference

The LMC6042AIM NOPB is a dual CMOS general-purpose operational amplifier from Texas Instruments with rail-to-rail output, up to 15.5 V single-supply operation, and a typical 1.4 MHz gain-bandwidth product. It features femtoampere-range input bias currents and is housed in an 8-pin SOIC package. Suitable for precision instrumentation, active filters, and high-impedance sensor interfaces in portable and industrial systems.

Switching Controllers Low-Power BiCMOS Current-Mode PWM

Texas Instruments UCC2803PWG4 is a low-power BiCMOS current-mode PWM switching controller operating from 4 V to 12 V supply in an 8-pin SOIC package. Provides cycle-by-cycle current limiting, soft-start, and undervoltage lockout for reliable power supply designs. Available from stock worldwide with fast shipping.

3-V to 5.5-V Single-Channel RS-232 Line Driver/Receiver

Counter Dual 4-Bit Decade UP 16-Pin TSSOP Tube

The TPS62046DGQG4 is a Texas Instruments synchronous step-down DC-DC converter accepting 2.5 V to 6 V input and delivering a fixed 3.3 V output at up to 1.2 A in a 10-pin HVSSOP package with exposed pad. It supports both PWM and PFM operating modes for high efficiency across light and heavy loads, targeting portable and battery-powered systems. Available worldwide with fast shipping for space-efficient power management designs.

IC 10-BIT D/A CONV 28-TSSOP

Voltage References Lo-Vtg Adj Precision Shunt Regulator

Texas Instruments TPS2058ADG4 is a quad high-side MOSFET power distribution switch operating from 2.7 V to 5.5 V with 0.345 A per channel, featuring independent enables for each of its 4 channels, in a 16-pin SOIC package. Available worldwide with RoHS compliance.

Battery Management Charger Front End

OP Amp Single GP R-R I/O ±3V/6V 8-Pin SOIC Tube

The SN74HC191DG4 is a 4-bit bidirectional binary counter IC in a 16-pin SOIC package from Texas Instruments. It operates in the HC/UH logic family, supports up to 17 MHz counting frequency, includes load and preset inputs, and features a ripple carry output for cascading multiple counter stages.

500-mA low-IQ small-size low-dropout (LDO) regulator

Use the download button to access the ISOW7844FDWE schematic symbol, PCB footprint, and 3D model.

Switching Controllers High Speed PWM Controller

Analog to Digital Converters - ADC 12-Bit 8-Ch Serial Output Sampling

IC 16BIT TRANSP D LATCH 48-SSOP

Use the download button to access the PCA9536DRG4 schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - CD74HCT597MT - SHIFT REG W/INPUT STORAGE, 8BIT, SOIC-16

Flip-Flops ABT Octal Edge-Trig D-Type F-F

Precision Amplifiers Dual Lo-Noise Prec Rail-to-Rail

The LM7171AMWGFQMLV is a high-speed voltage-feedback operational amplifier from Texas Instruments in a 10-pin CSOIC package. It operates on supply voltages up to ±18 V or 36 V single supply with a common-mode rejection ratio of up to 105 dB. Suited for video amplification, instrumentation, and precision signal conditioning requiring wide bandwidth.

Power Switch ICs - Power Distribution 0.66A 2.7-5.5V Sngl Hi-Side MOSFET

Automotive Single-Channel LED Driver

Use the download button to access the MCP6294IPWT schematic symbol, PCB footprint, and 3D model.

High Speed Operational Amplifiers Single Lo-Distort Current Feedback

The MAX3221ECPWRG4 is a single-channel RS-232 line transceiver from Texas Instruments operating from 3V to 5.5V, featuring one driver and one receiver in a 16-pin TSSOP package. It uses an internal charge pump with four small external capacitors to generate RS-232 voltage levels without a separate ±12V supply. Suitable for portable equipment, embedded UART ports, and industrial serial communication links conforming to EIA-232-F.

8-Bit, 10 us DAC, Serial Input, Quad DAC, Pgrmable 1x or 2x Output, Simultaneous Update

Shift Register Single 8-Bit Serial/Parallel to Serial 16-Pin SOIC T/R

Switching Voltage Regulators 6-uA Quiescent Current, 1.8-A Switch Current Boost Converter 5-SOT-23 -40 to 85

Latches Octal Transparent DTYPE Latches

Dual Channel, 26V, Low-/High-Side Voltage Output Current Sense Amp

Half-Duplex M-LVDS Transceiver

Comparator Quad ±15V/30V Automotive 14-Pin PDIP Tube

Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SOT-553 T/R

Digital Isolators Iso 5V Full & Half Duplex RS-485 Xcvr

Counter/Divider Single 14-Bit Binary UP 16-Pin CDIP Tube

LDO Voltage Regulators 200mA Low-Iq Low-Noise Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP 4-DSBGA -40 to 125

Texas Instruments TLC072IDRG4 is a dual low-noise JFET-input operational amplifier with 80 dB CMRR minimum and 3 mV max input offset voltage, packaged in an 8-pin SOIC for precision signal conditioning and audio applications.

16-bit Ultra-Low-Power MCU, 24kB Flash, 1024B RAM, 12-Bit ADC, Dual 12-Bit DAC, USART, I2C, DMA

Voltage References 2.048V 50ppm/DegC 50uA SOT23-3 Series

0.66A, 2.7-5.5V Single Hot-Swap IC Hi-Side MOSFET, Fault Report, Act-High Enable

Automotive SOT23 Precision Low Dropout Voltage Reference

TEXAS INSTRUMENTS - BQ29414PW - BATTERY PROTECTION, 2-4 CELL, 8TSSOP