op-amps
op-amps components are essential building blocks in modern electronic systems. FindMyChip sources op-amps ICs from authorized China distributors with competitive pricing and reliable stock.
20 components
How to Choose op-amps Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
op-amps Guides & Articles
DP83848 10/100 Mbps Ethernet PHY Transceiver: How to Choose the Right Variant
A complete selection guide for the DP83848 family: compare temperature grades, packages, JTAG support, and interface options across all five variants.
Jun 2, 2026
LM5156 Wide-VIN Boost/SEPIC/Flyback Controller: How to Choose the Right Variant
A concise selection guide for the LM5156 and LM51561 family: how to choose between automotive vs industrial grade, spread-spectrum vs fixed-frequency, and WSON-8 vs HTSSOP-14 package.
Jun 2, 2026
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
All op-amps Components
Showing 1–20 of 20
Texas Instruments OPA2333AQDGKRQ1 is an automotive-grade dual zero-drift CMOS op-amp with ±5µV offset, 17µA/ch quiescent current, and 1.8V–5.5V supply. In stock from $2.02/unit (qty 21+), MOQ 1, global shipping.
The LMV822M/NOPB is a Texas Instruments dual low-power op-amp featuring 1 MHz gain-bandwidth, 1 V/µs slew rate, and 2.7–5.5V supply range in a SOT-23-8 package. Priced from $0.47, in stock, 1-piece minimum, ships worldwide.
LMV793MA/NOPB is a low-noise single op-amp from Texas Instruments with 88MHz GBW, 1.8V-5.5V supply, rail-to-rail output, SOT-23-5 package. From $0.49, in-stock, ships worldwide, 1-piece MOQ.
LMC6032IM/NOPB is a TI dual CMOS rail-to-rail output op-amp, 1.5MHz GBW, 100uA/amp supply current, 2.7-10V supply, SOIC-8, -40 to 85C. From $0.54/unit, in stock, ships worldwide.
OPA4228UA is Texas Instruments' quad precision op-amp with 3 nV/√Hz input noise, 138 dB CMRR, and ±18V supply range in a SOIC-14 package. From $7.84/unit, 1 pc MOQ, in stock with global shipping.
OPA209AID is a TI precision op-amp with 6.5nV/sqrt(Hz) noise, 10pA bias current, 8MHz bandwidth, rail-to-rail output, SOIC-8 package. From $1.41, in stock, 1-piece MOQ, ships worldwide.
The OPA27GU is an ultra-low noise precision op-amp from Texas Instruments featuring 3nV/√Hz input noise, 8MHz GBW, and 1.9µV max offset voltage in SOIC-8 package. Starting at $3.08, in stock with 1-piece MOQ and global shipping.
OPA363IDBVT is a 5V single-supply rail-to-rail I/O op-amp from Texas Instruments with 3MHz GBW, 2V/us slew rate, SOT-23-5 package; from $1.29/unit (qty 160); in-stock, 1-piece minimum, worldwide shipping.
TLC274AID is a quad CMOS op-amp from Texas Instruments in SOIC-14, 1MHz GBW, 3V to 16V supply, -40C to 85C industrial grade. From $2.12/pc, in stock, MOQ 1, ships globally.
LM224D is a quad general-purpose operational amplifier from Texas Instruments in SOIC-14 package, operating on 3-32V single supply, priced from $0.81 (1pc). In stock, ships globally, MOQ 1.
TL062ACD is a low-power JFET-input dual op-amp by Texas Instruments, 1MHz bandwidth, 18V max supply, SOIC-8 package, from $0.32, in stock, ships globally, 1-piece minimum.
TLV2242ID is a dual rail-to-rail output, 1MHz op-amp from Texas Instruments in SOIC-8, operating on 2.7–6V with 35µA quiescent current per channel. In stock, from $3.02/1 pc, ships globally.
OPA2335AID is a dual zero-drift op-amp from Texas Instruments with 5µV max offset voltage, 100µA supply current, and 5.5V supply. In stock, from $0.60, MOQ 1, ships worldwide.
TL082CD is a dual JFET-input op-amp by Texas Instruments in SOIC-8, with ±18V supply range and 3MHz GBW. From $0.46/unit, 1-piece MOQ, ships globally.
OPA360AIDCKT is a 1.8V to 5.5V, 50MHz rail-to-rail output CMOS op-amp by Texas Instruments in SC-70-5 package, featuring 1.3mA supply current and -40°C to 105°C operation. From $0.15/unit, in stock, ships worldwide.
The TLV2442ID is a dual low-power op-amp from Texas Instruments with 1.8V-5.5V supply, 500kHz GBW, and rail-to-rail output in SOIC-8. Priced from $0.65, in stock, ships globally, 1pc MOQ.
OPA4227UA is a TI precision quad op-amp: 8 nV/√Hz noise, 25 µV offset, 8 MHz GBW, ±2.25–18V supply, SOIC-14. From $9.00/1pc, in-stock, ships globally, MOQ 1.
The OPA604AU/2K5 is a FET-input op-amp from Texas Instruments in SOIC-8 package. Key specs: 18V max supply, 20MHz GBW, 25V/us slew rate. From $1.65/unit, in-stock, 1pc MOQ, ships worldwide.
The LF356MX/NOPB is a JFET-input op-amp in SOIC-8 from Texas Instruments, offering 13V/μs slew rate and 5MHz bandwidth. Priced from $0.51 with stock available, 1-piece MOQ, ships worldwide.
Texas Instruments OPA134UA/2K5 is a SoundPlus precision audio op-amp, SOIC-8, 8MHz GBW, −40°C to +85°C. From $1.97 in bulk, in stock, ships globally, 1pc MOQ.