Texas Instruments

The UCC3585D is a voltage-mode PWM Buck Switching Controller IC from Texas Instruments, designed for 3 V to 5.5 V input supplies with a nominal 3.3 V operating voltage in a 16-pin SOIC surface-mount package. Available from authorized global distributors with competitive pricing and fast worldwide shipping.

The UCC28782CDRTWR is a high-density active clamp flyback (ACF) controller IC from Texas Instruments, featuring current-mode PWM control, integrated EMI frequency dithering, X-capacitor discharge, and bias power management for compact USB-PD and AC-DC adapter designs. Key specs: 14V to 34V VCC input range, current-mode control, 24-pin QFN package, YTEOL 15 years. Available RoHS-compliant in tape-and-reel from authorized distributors in stock with worldwide shipping.

The Texas Instruments TPS1120DR is a dual P-channel enhancement-mode MOSFET with logic-level gate compatibility, 15 V breakdown voltage, 1.17 A drain current, and 0.4 Ω RDS(on) in an 8-pin SOIC surface-mount package. Both channels are independent with integrated ESD protection and built-in body diodes for versatile load switching. Available from $0.80 in stock with worldwide shipping.

The SN74LVC1G97DCKR-NG is a configurable multiple-function single logic gate in LVC family supporting 1.65V to 5.5V supply range with high-speed operation. It allows flexible AND, OR, NAND, NOR, and other configurations in an ultra-compact 6-pin SOT-23 package. Available from Texas Instruments with worldwide shipping.

The UCC28501DW is an average current-mode PWM power factor controller with post-regulator from Texas Instruments, switching at up to 120 kHz. It operates from a 10.3V to 18V input supply and can also be configured for current mode or voltage mode control in a 20-pin SOIC package. Available from stock with worldwide shipping.

The UCC2819ADR is a BiCMOS power factor correction pre-regulator controller from Texas Instruments using current-mode PWM control with a 10.8V to 17V supply range. It provides active PFC to meet IEC 61000-3-2 standards for AC line harmonics reduction. Available in a 16-pin SOIC package with worldwide shipping from stock.

The TLV9352QDRQ1 is an automotive-grade dual-channel operational amplifier from Texas Instruments with 3.5 MHz bandwidth, 40 V supply rating, and rail-to-rail output in an 8-pin SOIC package. It features 110 dB nominal CMRR and MUX-friendly input design for AEC-Q100 applications. Available in stock with worldwide shipping.

TLC4502AMJGB is a self-calibrating chopper-stabilized precision dual operational amplifier by Texas Instruments in a ceramic DIP package. Key specs: 0.00006µA max bias current, 100dB typical CMRR, frequency-compensated inputs. From $12.00, in stock with worldwide shipping.

Texas Instruments TLIN1021ADRBRQ1 is an AEC-Q100 automotive fault-protected LIN transceiver with inhibit and wake functions, operating from -40°C to 125°C in an 8-pin SON package. Supports single-channel LIN communication at up to 20 kbps data rate. Available from stock with worldwide shipping.

Texas Instruments TLC0838 is an 8-bit successive approximation ADC with 8 analog input channels. Key specs: 32 µs max conversion time, 5.5V max analog input, 20-TSSOP package. Available from stock with worldwide shipping.

Use the download button to access the SN74LS624NS 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

ADC108S052CIMTX/NOPB

LM5045SQ is a driver IC by Texas Instruments. Key specs include Input Voltage-Max: 100 V; QFN, 28 pins. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Use the download button to access the LM2575T-12/LF03 schematic symbol, PCB footprint, and 3D model.

DSP 16bit/32bit 432MHz 338-Pin NFBGA Tray

Use the download button to access the UA7812CKTTR schematic symbol, PCB footprint, and 3D model.

BQ294506DRVR

Triple Transmitter/Receiver RS-422/RS-485 20-Pin SOIC T/R

Board Mount Hall Effect/Magnetic Sensors

Use the download button to access the TLV9351IDCKR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Dual Operational Amplifier 8-TO-99 -55 to 125

Encoders, Decoders, Multiplexers & Demultiplexers Dual 2-Line to 4-Line Decoders/Demultiplexers 16-PDIP 0 to 70

RF System on a Chip - SoC Single-chip 60-GHz to 64-GHz automotive radar sensor integrating MCU and radar acceleratorfdvfd

RGW-21

IC PFC CTR AVERAGE 200KHZ 20SOIC

UCC3806J is a low-power dual-output current-mode PWM controller from Texas Instruments featuring 8V to 14.5V input range and adjustable operation from 2.5V to 15V in a 16-pin ceramic DIP package. From $4.50 in stock worldwide shipping.

DIP-20

Full-Bridge, Half-Bridge, Push-Pull Regulator Positive Output Step-Up/Step-Down DC-DC Controller IC 12-USON (3x2)

UCC2583DTR

https://www.ti.com/lit/ds/symlink/bq500110.pdf?HQS=dis-dk-null-digikeymode-dsf-pf-null-wwe&ts=1631517040405&ref_url=https%253A%252F%252Fwww.digikey.at%252F

3-SERIES TO 10-SERIES MULTICELL

12-CH Gamma Voltage Generator with Dual Memory Banks and EEPROM Access

The TPS60255RTET is a 7-channel switched-capacitor voltage converter accepting 2.7 V to 6.0 V input, achieving up to 93% efficiency, housed in a 16-pin QFN package for compact power-supply designs.

Battery Battery Protection IC Lithium Ion 8-WSON (3x4)

Texas Instruments 5962-9579801VPA is a space-grade single-channel MOSFET gate driver with 1.5 A source/sink, 40 V VDD, output latch, and radiation hardening in a ceramic DIP-8 package. From $85.00 in stock worldwide shipping.

14 Bit Analog to Digital Converter 1 Input 1 Pipelined 48-VQFN (7x7)

Battery Battery Protection IC Lithium Ion 6-WSON (2x2)

Module DC-DC 1-OUT 2.5V to 12.6V 6A 90W Automotive 7-Pin SMD Module T/R

Texas Instruments CC2533F96RHA is a 2.4 GHz IEEE 802.15.4 RF System-on-Chip integrating an 8051-compatible MCU with 96 KB flash and 8 KB RAM in a compact QFN package. Designed for ZigBee and RF4CE remote-control applications with a true single-chip wireless solution. Available from stock with worldwide shipping.

Low-Voltage High-Speed Quadruple Differential Line Driver

Texas Instruments BQ294515DRVR is a single-channel input fault protection controller in a 6-pin WSON package that guards battery and power-supply inputs against overvoltage and reverse-polarity events. It integrates adjustable OVP threshold circuitry operating up to 28 V to protect downstream ICs. Available from global stock with competitive pricing for portable and industrial designs.

AWR1642ABISABLRQ1 is a Single-chip 76-GHz to 81-GHz automotive radar sensor integrating DSP and MCU by Texas Instruments. Key specs: 161 pins, -40°C to 125°C, BGA. From inquiry pricing, available through FindMyChip sourcing with worldwide shipping.

ATL431LIBQDBZR-S is a Low-IQ programmable shunt regulator offered in an ultra-small DQN package by Texas Instruments. Key specs: 3 pins, SOT23 (3-Pin). From inquiry pricing, available through FindMyChip sourcing with worldwide shipping.

Texas Instruments ADS8688ATDBTR is a 16-bit, 500 kSPS successive approximation ADC with 8 channels and bipolar ±10.24 V inputs powered from 5 V, featuring an integrated low-drift voltage reference and wide temperature range operation. Ideal for industrial data acquisition and process control. Available worldwide with fast shipping.

Battery Battery Protection IC Lithium Ion 6-WSON (2x2)

UCC2817DTR

IC BATT CHG LI-ION 1CEL 20HTSSOP

TSSOP8

DBQ

2.5-V precision programmable shunt regulator