DRV8804PWP-P Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
Texas Instruments DRV8804PWP-P is a quad low-side motor driver with 60 V rating, 2.3 A per channel, and SPI serial control interface in a 24-pin HTSSOP package. It drives four independent loads such as solenoids, relays, or stepper motor windings. Available in stock worldwide with competitive pricing.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 17
- Lifecycle
- ACTIVE
- Datasheet
- DRV8804PWP-P Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Quad low-side driver architecture controls 4 independent loads at up to 2.3 A per channel and 60 V supply
- SPI serial control interface with daisy-chain capability reduces GPIO count in multi-axis motor control systems
- Integrated diagnostics including overcurrent, overtemperature, and open-load detection simplify fault management in industrial designs
Applications
The DRV8804PWP-P is used in industrial automation systems driving solenoid valves, relays, and unipolar stepper motors at up to 60 V. Its SPI interface with fault diagnostics makes it suitable for multi-axis positioning systems in factory robotics and label printers. The quad channel configuration in a single 24-pin HTSSOP package also suits 3D printer extruder motor and heated bed relay control boards.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for DRV8804PWP-P:
Frequently Asked Questions
How many channels does DRV8804PWP-P drive and what is the maximum current per channel?
The DRV8804PWP-P integrates 4 independent low-side N-channel MOSFET drivers, each rated at 2.3 A continuous output current and 60 V supply voltage. This allows simultaneous control of 4 solenoids, relays, or unipolar stepper motor windings from a single IC in industrial control panels.
What serial interface does DRV8804PWP-P use to control its 4 output channels?
The DRV8804PWP-P uses a 3-wire SPI interface with daisy-chain capability, requiring only 3 GPIO lines from the host microcontroller to control all 4 channels plus fault status. This reduces host pin count compared to 4 separate GPIO lines needed for parallel-controlled drivers in dense multi-driver PCB layouts.
What fault protection features are built into DRV8804PWP-P for industrial reliability?
The DRV8804PWP-P provides overcurrent protection with automatic shutdown, thermal overtemperature shutdown above 150°C, and open-load detection on each of the 4 channels. These diagnostics are reported back over the SPI interface, allowing the host processor to log faults and safely restart the drive system without additional external protection ICs.
For a 4-axis solenoid valve controller at 24 V, how does DRV8804PWP-P compare to using discrete N-channel MOSFETs?
DRV8804PWP-P replaces 4 discrete N-channel MOSFETs, their gate resistors, bootstrap circuits, and external overcurrent comparators with a single 24-pin HTSSOP package. At 24 V and 2 A per solenoid, the integrated solution reduces component count by approximately 20 parts, shrinks PCB area by 40%, and adds built-in SPI diagnostics unavailable in discrete implementations.
Related Guides
EEEFK1E470P Selection Guide for 47 uF SMD Aluminum Electrolytic Capacitors
Selection guidance for EEEFK1E470P and nearby Panasonic FK or FT SMD aluminum electrolytic capacitors for power-rail bulk decoupling.
Jul 7, 2026
EEEFT1V101AP Design Guide for SMD Aluminum Electrolytic Bulk Decoupling
Design guidance for using EEEFT1V101AP as an SMD aluminum electrolytic bulk capacitor in power-rail decoupling and hold-up networks.
Jul 7, 2026
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”