logic
Logic ICs perform fundamental digital operations and include gates, flip-flops, multiplexers, and programmable logic devices for digital system design.
4 components
How to Choose logic Components
- 1Select logic family (CMOS, LVC, AUP) based on speed, power, and voltage-level translation needs.
- 2Verify propagation delay meets your timing budget for critical signal paths.
- 3Consider multi-gate packages to reduce component count and board space in simple logic functions.
Popular Applications
Level Translation
Voltage shifting between 1.8V, 3.3V, and 5V domains
Signal Routing
Multiplexing, buffering, and bus switching
Glue Logic
Board-level combinational and sequential functions
Clock Distribution
Fanout buffers, dividers, and clock gating
logic Guides & Articles
DP83TG720SWRHATQ1 Automotive Ethernet PHY Selection Guide
Choose DP83TG720SWRHATQ1 by comparing MAC interfaces, exact ordering codes, qualification evidence, and documented supply offers.
Nov 15, 2026
TLV76033 Selection Guide: Headroom, Heat, and Sourcing
Choose a TLV76033 3.3-V supply using manufacturer ratings, load profiles, dropout calculations, thermal checks, and exact orderable parts.
Nov 14, 2026
DP83TG720SWRHATQ1 Automotive Ethernet Board Design Guide
A practical DP83TG720SWRHATQ1 board checklist for host interfaces, startup, channel validation, qualified variants, and sourcing.
Nov 14, 2026
BQ76942PFBR Battery Monitor Selection and Procurement Guide
Choose BQ76942PFBR by cell count, protection architecture, factory configuration, measurement needs, and a controlled sourcing specification.
Nov 13, 2026
All logic Components
Showing 1–4 of 4
SN74CBT3306CPWRG4 is a single-bit bus switch IC from Texas Instruments with 5-ohm on-state resistance and -2V undershoot protection, operating on 2.3V to 3.6V supply in TSSOP-8 package. Starting at $1.00/unit, in stock, 1-piece MOQ, ships worldwide.
SN75452BD is a dual peripheral AND driver IC by Texas Instruments in DIP-8 package, with open-collector outputs rated 300mA/30V, priced from $0.55/unit with stock available, 1-piece MOQ, worldwide shipping.
SN74HCT139D is a dual 2-to-4 line decoder/demultiplexer from Texas Instruments, HCT CMOS with TTL-compatible inputs, 2V-6V supply, 16-pin SOIC. In stock from $0.66/unit, 1 pc MOQ, worldwide shipping.
SN74LVC06AD is a hex inverting open-drain buffer/driver from Texas Instruments, operating on 1.65V–5.5V supply with 14-pin SOIC package, -40°C to 85°C range. From $0.217/50pcs. In stock, ships globally.