Logic ICs
Logic ICs components are essential building blocks in modern electronic systems. FindMyChip sources Logic ICs ICs from authorized China distributors with competitive pricing and reliable stock.
6 components
How to Choose Logic ICs Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Logic ICs Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Logic ICs Components
Showing 1–6 of 6
CD4048BM96G4 is a CMOS 8-input multifunction gate IC by Texas Instruments in a 16-pin SOIC package with 3-state output. Key specs: 50 pF load capacitance, CD4000 series logic family, tape-and-reel packaging. From $0.30, in stock with worldwide shipping.
CD4049UBF is a CMOS hex inverter buffer with CMOS-to-TTL level translation capability by Texas Instruments in a 16-pin ceramic DIP package. Key specs: 6 inverter functions, 50 pF load capacitance, 18 mA output low current. From $0.40, in stock with worldwide shipping.
The CD74HCT154M96 is a high-speed CMOS 4-to-16 line decoder/demultiplexer from Texas Instruments HCT family. It accepts four binary-coded address inputs (A0–A3) and activates one of 16 mutually exclusive outputs LOW, making it ideal for address decoding, memory chip-select generation, and data routing in TTL-compatible 5V digital systems. Two active-LOW enable inputs (E1, E2) must both be LOW for normal decode operation, providing convenient cascading and output blanking. The M96 suffix denotes a 24-pin wide-body SOIC package for reliable SMD assembly.
74AHCT1G14DCKT is a single CMOS Schmitt trigger inverter by Texas Instruments with an 8 mA output drive in a 5-pin SC-70 package. Key specs: 4.5 V to 5.5 V supply range, Schmitt trigger input with hysteresis, propagation delay under 10 ns. From $0.15, in stock with worldwide shipping.
CD74HC4049NSR is a hex inverting buffer and CMOS-to-TTL level translator IC by Texas Instruments in the HC/UH family. Key specs: 6 inverter functions, 50 pF load capacitance, 4 mA output sink current, 16-pin SOIC package. From $0.30, in stock with worldwide shipping.
The SN7406DR is a hex inverting buffer and driver with open-collector outputs from Texas Instruments, housed in the SOIC-14 surface-mount package. It contains six independent inverter/driver channels, each capable of sinking up to 40 mA at 30 V, making it ideal for driving TTL logic levels into higher-voltage loads such as relays, indicator lamps, and bus lines. The open-collector architecture enables wire-AND logic and direct interface to MOS and CMOS devices. Operating over the commercial temperature range of 0°C to 70°C, the SN7406DR is a compact and cost-effective solution for level shifting and load-driving applications in industrial and consumer electronics designs.