Texas Instruments

The UA78L05ACPKE6 is a Texas Instruments fixed 5V, 100mA linear voltage regulator with 30V maximum input voltage and 1.7V dropout, housed in a SOT-89 package for industrial temperature range 0 to 125°C. It features excellent line regulation of 0.15% and load regulation of 0.06% for precise voltage references. Available from authorized distributors with worldwide shipping.

Use the download button to access the OPA2992IDR schematic symbol, PCB footprint, and 3D model.

The TPS2066DGNR-1 is a single-channel load switch IC from Texas Instruments operating from 2.7 V to 5.5 V input. It features an adjustable current limit and over-temperature protection in an 8-pin SOIC package. Available worldwide with fast shipping and competitive pricing.

TMCS1107A1BQDRQ1 is an AEC-Q100 Grade 1 automotive isolated Hall-effect current sensor supporting up to ±420 V isolation with analog voltage output and internal reference in an 8-pin SOIC package. It operates from -40°C to 125°C for reliable current measurement in harsh automotive and industrial environments. In stock worldwide with competitive pricing and fast shipping.

The TPS7B8850QKVURQ1R2 is an automotive-grade 500mA, 40V low-dropout linear regulator with fast transient response and fixed output voltage in a TO-252 package. Supports input voltages from 6V to 40V with a typical dropout voltage of 0.39V. Available from stock worldwide with AEC-Q100 qualification for automotive applications.

Translation Transceiver 1 Element 8 Bit per Element 3-State Output 24-VQFN (5.5x3.5)

Texas Instruments TPS54622RHLT is a 6 A current-mode synchronous buck converter operating from 4.5 V to 17 V input in a 14-pin VQFN package, optimized for point-of-load regulation in industrial and communications equipment. Integrated high-side and low-side MOSFETs reduce external component count. Available in stock globally with worldwide shipping.

OPA4344PA Texas Instruments, Precision, Op Amp, RRIO, 1MHz 10 kHz, 2.5 → 5.5 V, 14-Pin PDIP

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 3.6V 2A 2.7V - 5.5V Input

IC OFFLINE SW MULT TOP 8VSSOP

PDIP. N. 14. TBD. Call TI. Call TI. SN74121NSR. ACTIVE. SO. NS. 14. 2000. Pb-Free. (RoHS). CU NIPDAU. Level-2-260C-1 YEAR/

Current Sense Amplifiers 40-V, bidirectional, high-precision current sense amplifier with picoamp input bias & ENABLE

Use the download button to access the LM337LZ/NOPB schematic symbol, PCB footprint, and 3D model.

General Purpose Amplifier 2 Circuit - 8-SOIC

Texas Instruments 5962-8995701VA is a military-grade 3-phase brushless DC motor controller IC in an 18-pin ceramic DIP package, rated from -55°C to 125°C. It operates as a switched-mode controller requiring an auxiliary -2.5V to -20V supply, with up to 0.5A output current per phase. Available from specialty distributors for MIL-SPEC applications worldwide.

Texas Instruments TLV342SIRUGR is a dual rail-to-rail input/output operational amplifier with a 90 dB typical CMRR, 4 mV maximum offset voltage, and 3 pA ultra-low bias current in a compact WSON package. Optimized for single-supply and low-power portable signal-conditioning circuits. Available in stock worldwide with immediate shipping.

Texas Instruments LM27402SQ is a high-performance synchronous buck controller using voltage-mode PWM control with DCR current sensing, operating from 3V to 20V input and targeting 4.5V typical output. Features lossless inductor DCR current sensing, fast transient response, and fits a compact 16-pin QFN package for space-constrained power designs. Ideal for point-of-load regulation in telecom, server, and industrial power systems.

The LT1013CDRE4 is a dual low-offset operational amplifier from Texas Instruments, featuring a 400 µV max offset voltage, 97 dB CMRR, and ±15 V supply in an 8-pin SOIC package. Available in stock with worldwide shipping.

Use the download button to access the TPS8268180SIPT schematic symbol, PCB footprint, and 3D model.

DC-DC Converters Step-Down Adjustable 1 2V 6V 0.6V 6V 600mA QFN-6_2x2x065P RoHS

Use the download button to access the LM2596T-12/LF03 schematic symbol, PCB footprint, and 3D model.

Buffers & Line Drivers 10-Bit Buffer/Driver With 3-State Output

Precision Amplifiers Low noise (0.2- uVPP, 9-nV/ Hz), heavy capacitive drive (25-nF), super beta, precision op amp 8-VSSOP -40 to 105

Bus Transceivers Single-bit dual-supply bus transceiver 6-SON -40 to 125

Texas Instruments LM2936Z-5.0/NOPB, 1 Low Dropout Voltage, Voltage Regulator 50mA 3-Pin, TO-92

Hot Swap Controller 13.8V Positive Voltage 10-Pin VSON EP T/R

Texas Instruments UCC256403ADDBR is an LLC resonant controller with ultra-low-power and ultra-quiet standby, operating from 11.25 V to 30 V supply in a 14-pin SOIC package. It uses current-mode resonant control and covers -40°C to 125°C for demanding industrial and server PSU applications. Available from stock worldwide with competitive pricing.

TEXAS INSTRUMENTS - AM3352BZCZ30 - MPU, 32BIT, 300MHZ, 0 TO 90DEG C

Precision Amplifiers High-speed (40-MHz), high-precision (25-uV) , low-noise op amp with integrated gain switches

TPS40195RGYT is a voltage-mode PWM synchronous buck controller from Texas Instruments supporting 4.5 V to 20 V input and adjustable output from 1 V to 5 V in a 16-pin QFN package. It drives external MOSFETs for high-efficiency DC-DC conversion in telecom, industrial, and computing point-of-load designs. Available from stock with worldwide shipping.

The TMS320F28374SZWTS is an automotive-grade 32-bit C28x floating-point DSP microcontroller from Texas Instruments running at up to 100 MHz with 512 KB of flash memory. It features integrated ADC, DAC, and DMA channels on a 1.2 V/3.3 V dual-supply in a 337-pin NFBGA package. Available worldwide with competitive pricing.

TPS75815KC is a fixed 1.5 V fast-transient LDO linear regulator with 150 mV typical dropout voltage and 5.5 V maximum input. High output current capability with 300 mV maximum dropout suits DSP and FPGA core voltage rails. Available in TO-263-5 KC package with worldwide shipping.

TLC7524IDG4 is a single-channel 8-bit multiplying DAC with parallel input interface, ±10V analog output range, and 0.1953% max linearity error. It accepts binary or offset binary code formats for flexible bipolar signal generation in analog control and waveform synthesis circuits. Available in a 16-pin SOIC package for standard surface-mount assembly.

Use the download button to access the DAC7564ICPWRG4 schematic symbol, PCB footprint, and 3D model.

TPS78512QKVURQ1 is an automotive-grade 1 A fixed 1.2 V LDO linear regulator with high accuracy from Texas Instruments. It features a low dropout voltage of 315 mV typical at full load and operates from 1.7 V to 6 V input. Available with AEC-Q100 qualification for demanding automotive applications.

Encoders, Decoders, Multiplexers & Demultiplexers Hi-Spd CMOS 4-16 Ln Decoder/Demltplxr

The CD4069UBMTG4 is a CMOS hex inverter from Texas Instruments containing 6 independent unbuffered NOT gates operating across a wide 3V to 15V supply range with 50 pF load drive capability. It belongs to the 4000-series CMOS family and is available in a 14-pin SOIC package. Suitable for logic level conversion, oscillator circuits, signal conditioning, and general-purpose digital logic design.

Precision Amplifiers High-speed (40-MHz), high-precision (25-uV) , low-noise op amp with integrated gain switches

Texas Instruments CD74HC4515EG4 is a high-speed CMOS 4-to-16 line decoder/demultiplexer with active-low outputs, operating from 2 V to 6 V supply. It features an enable input and is housed in a 24-pin DIP package suitable for logic decoding applications.

The CD74HCT75EE4 is a dual D-latch high-speed CMOS logic IC from Texas Instruments in the HCT family, featuring complementary outputs and 50pF load capacitance rating in a 16-pin DIP package. It provides 4mA output sink current and full TTL-compatible input thresholds for interfacing with 5V logic systems. Available from stock worldwide in a through-hole DIP package.

MPU AM335x RISC 32bit 600MHz 1.8V/3.3V Automotive 298-Pin NFBGA

Buffers & Line Drivers Dual FET Bus Switch

OR Gate 1-Element 2-IN CMOS 6-Pin X2SON T/R

SN74LS147DR is a 10-line to 4-line BCD priority encoder from Texas Instruments' 74LS logic family, encoding nine active-low inputs into a 4-bit BCD code with inverted outputs. It handles priority resolution in hardware so the highest-order active input determines the encoded output without software intervention. Packaged in a 16-pin SOIC, it suits keypad encoding, interrupt prioritization, and numeric input interfaces in 5 V TTL systems.

The TL5001AQDG4 is an AEC-Q100-qualified voltage-mode PWM DC-DC controller supporting step-down and step-up topologies from 3.6 V to 40 V input at 500 kHz switching frequency, delivering up to 20 mA gate drive in an 8-pin SOIC tape-and-reel package.

2 Audio power amplifier,LM4880N 200mW

Logic Gates Triple 3 Input Pos NAND Gate

The AM5706BCBDDS is a Texas Instruments Sitara AM570x high-performance application processor featuring ARM Cortex-A15 cores with integrated DSP and accelerators for industrial applications. It operates at 1.11V to 1.2V core supply in a compact 538-ball FCBGA package. Available from authorized distributors with worldwide shipping.

Op Amp Quad Low Offset Voltage Amplifier R-R O/P ±18V/36V 14-Pin SOIC T/R

Texas Instruments TL5001AQDRG4 is a PWM switching controller in an 8-pin SOIC package, operating from 3.6 V to 40 V input. It supports voltage-mode control at up to 500 kHz switching frequency with 20 mA output drive.