Texas Instruments

Motor / Motion / Ignition Controllers & Drivers 35-V, 1-A, quad independent half bridge driver with current sense 28-HTSSOP -40 to 125

The TLV320ADC6120IRTER is a high-performance stereo audio analog-to-digital converter from Texas Instruments featuring 123-dB SNR and 768-kHz sampling rate with 32-bit resolution. It integrates two analog input channels with a delta-sigma conversion architecture in a compact 20-pin VQFN package. Available from authorized distributors worldwide with competitive pricing and in-stock inventory for immediate shipment.

Texas Instruments LM2940CS-15/NOPB, 1 Low Dropout Voltage, Voltage Regulator 1A, 15 V 3-Pin, D2PAK (TO-263)

Linear Voltage Regulators 100-mA, 30-V, linear voltage regulator 3-TO-92 0 to 125

Use the download button to access the LM5158RTER schematic symbol, PCB footprint, and 3D model.

X2SON-5

Voltage References Fixed & adjustable, precision micropower shunt voltage reference 3-SOT-23 -40 to 85

UCC27614DSGR is a single-channel IGBT/MOSFET gate driver IC from Texas Instruments with open-drain output, supporting standard input logic and operating from a 4 V to 18 V supply. Available in an 8-pin WSON package with JESD-609 e4 halogen-free rating. From $0.80 in stock worldwide shipping.

Automotive-grade Hall effect switch sensor with in-plane sensing capability, 2 mT hysteresis, omnipolar input mode, and reverse polarity protection. Designed for AEC-Q100-qualified applications in compact SOT-23 package. Suitable for speed sensing, position detection, and current limit applications in automotive systems.

Use the download button to access the LM5150QRUMTQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments TMCS1107A2BQDRQ1 is an AEC-Q100 qualified isolated Hall-effect current sensor supporting ±420 V isolation, analog voltage output, and an operating range of -40°C to 125°C in an 8-SOIC surface-mount package. Suited for automotive and industrial current measurement.

The Texas Instruments XIO2001IZWSR is a PCIe to PCI bus translation bridge IC supporting 32-bit PCI at up to 250 MBps and 125 MHz clock. It operates from -40°C to 85°C in a compact 169-NFBGA package. In stock worldwide with competitive pricing and fast global shipping.

Use the download button to access the AMC1350DWVR schematic symbol, PCB footprint, and 3D model.

The Texas Instruments TMAG5170A1QDGKT is an automotive-grade 3D Hall-effect magnetic sensor with a 4-wire SPI interface and ±2 mA output range. It features a compact 3×3×1.1 mm surface-mount plastic package with high-accuracy magnetic field sensing. Available from stock with worldwide shipping.

Texas Instruments TPS75533KCG3 is a fixed 3.3V low-dropout linear regulator with 1A output current and 0.5V maximum dropout voltage. It operates from 3.9V to 5.5V input and features fast transient response. Available in TO-263 package with worldwide shipping.

Texas Instruments LM22676TJ-5.0/NOPB is a voltage-mode PWM step-down switching regulator with a fixed 5 V output, 4.5 V to 42 V input range, in a compact 7-pin PSSO package. From $1.80 in stock worldwide shipping.

The Texas Instruments DM74LS283M is a classic 4-bit binary full adder with fast carry propagation in the 74LS TTL logic family in a 16-pin SOIC package. It performs parallel binary addition on two 4-bit operands with carry-in and carry-out. Available from stock with worldwide shipping.

Use the download button to access the LM78L05ACZ/LFT7 schematic symbol, PCB footprint, and 3D model.

TPS62085RLTT is a high-efficiency synchronous step-down DC-DC converter by Texas Instruments with PWM/PFM control. Key specs: 2.5–6V input, 0.8–6V adjustable output, 7-pin WSON package. From $1.20, in stock with worldwide shipping.

The XIO2001IZWS is a PCIe to PCI bus translation bridge IC by Texas Instruments. Key specs: 32-bit address and data bus, 125 MHz max clock, 250 MBps data transfer rate, operating from -40 to 85°C. Available in 169-NFBGA package with worldwide shipping.

TPS73501DRBR is an adjustable single-output LDO voltage regulator with 500mA current capability and ultra-low 0.28V nominal dropout voltage. Operates from 2.7V to 6.5V input with excellent 0.02%/V line regulation and low noise output. From $1.00 in stock with worldwide shipping.

Texas Instruments TMS320DM642AZDK6 is a 32-bit fixed-point digital media processor optimized for video and imaging applications. Features 75.19 MHz max clock, 64-bit external data bus, 23-bit address bus, integrated cache, and JTAG boundary scan in a BGA package. Available from stock with worldwide shipping.

Battery Management Li-Ion/Li Polymer Ad vanced Single-Cell B BQ29728DSET

The TPA2005D1DRBR is a Texas Instruments single-channel Class-D audio amplifier delivering 1.45W output power with 20kHz bandwidth and 97dB SNR in a compact 8-pin VSON package. It integrates a highly efficient switching output stage minimizing heat dissipation in battery-powered portable speaker applications. Available from authorized distributors with worldwide shipping.

The TMS320F28335ZAYAR is a 32-bit C28x floating-point DSP from Texas Instruments running at up to 150 MHz with integrated ADC and JTAG boundary scan in a BGA package. It is designed for advanced real-time control in power electronics and motor drive systems. Available from stock worldwide with competitive pricing and fast shipping.

Texas Instruments 5962R2021001VSC is a dc-dc converter for electronic assemblies. It is specified around 999 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

The Texas Instruments TPS7A2045PDBVR is an ultra-low-noise 300 mA fixed LDO regulator with high PSRR and a maximum dropout voltage of only 145 mV. It features low quiescent current, 0.019% maximum load regulation, and a 4.5V output in a SOT-23-5 package. Available from stock with worldwide shipping.

LDO Voltage Regulators 3-A, ultra-low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125

Texas Instruments TPS79633KTTR is a fixed-output low-dropout linear regulator with 0.22V nominal dropout voltage and 4.3V to 5.5V input voltage range in a 5-pin TO-263 package. It delivers a regulated 3.3V output with high PSRR and low noise performance suitable for sensitive analog and RF circuits. Available in stock from Texas Instruments with worldwide shipping.

-12-V, P channel NexFET™ power MOSFET, single LGA 0.6 mm x 0.7 mm, 116 mOhm, gate ESD protection

Buffers & Line Drivers Dual FET Bus Switch

16-bit Microcontrollers - MCU Ultra low power MCU

SN54HCT373FK is an octal transparent D-type latch from Texas Instruments in the HCT logic family, providing 8 individually latched outputs with 3-state capability and an active-low output enable. The device supports a 150 pF load capacitance and 6 mA output sink current, making it suitable for bus-hold and data-register functions. Packaged in a 20-pin ceramic LCC, it serves high-reliability military and aerospace data bus buffering applications.

Operational Amplifiers - Op Amps Hi-Vltg Hi-Current Op Amp

The LM22673TJE-5.0/NOPB is a fixed 5V output buck switching regulator from Texas Instruments capable of delivering 3A output current with an input voltage range of 4.5V to 42V. It uses voltage-mode PWM control and is housed in a 7-lead TO-263 Thin package for excellent thermal management. RoHS compliant and available from distributors worldwide with fast shipping.

Use the download button to access the DRV591VFP schematic symbol, PCB footprint, and 3D model.

Use the download button to access the LM2673SX-12/NOPB schematic symbol and PCB footprint.

Instrumentation Amplifiers Dual Low Power G = 10 100

The Texas Instruments XIO2001ZWS is a PCI-to-PCI Express bridge supporting 32-bit PCI at 125MHz with up to 250MBps data transfer rate in a 169-ball BGA package. It enables legacy PCI device integration into PCIe-based systems. Available from stock with worldwide shipping.

The TPS61010DGSRG4 is a Texas Instruments low-input-voltage synchronous boost converter operating from 0.8V to 3.3V input using current-mode PWM control. It provides adjustable output from 1.5V to 3.3V, enabling efficient power conversion for single-cell battery applications in a 10-pin MSOP package. Available with worldwide shipping.

Advanced Floppy Disk Controller

LDO Voltage Regulators 5-A, 13-V, linear voltage regulator 3-DDPAK/TO-263 0 to 125

Texas Instruments LM4050QCEM3X5.0/NOPB is a precision micropower shunt voltage reference with a 5.0 V nominal output (4.95 V–5.05 V), two-terminal operation, AEC-Q100 qualification, and a 3-pin SOT-23 package.

Translation - Voltage Levels 4B Dual-Supply Bus Xcvr

The UA78L05ACPKE6 is a Texas Instruments fixed 5V, 100mA linear voltage regulator with 30V maximum input voltage and 1.7V dropout, housed in a SOT-89 package for industrial temperature range 0 to 125°C. It features excellent line regulation of 0.15% and load regulation of 0.06% for precise voltage references. Available from authorized distributors with worldwide shipping.

Use the download button to access the OPA2992IDR schematic symbol, PCB footprint, and 3D model.

The TPS2066DGNR-1 is a single-channel load switch IC from Texas Instruments operating from 2.7 V to 5.5 V input. It features an adjustable current limit and over-temperature protection in an 8-pin SOIC package. Available worldwide with fast shipping and competitive pricing.

TMCS1107A1BQDRQ1 is an AEC-Q100 Grade 1 automotive isolated Hall-effect current sensor supporting up to ±420 V isolation with analog voltage output and internal reference in an 8-pin SOIC package. It operates from -40°C to 125°C for reliable current measurement in harsh automotive and industrial environments. In stock worldwide with competitive pricing and fast shipping.

The TPS7B8850QKVURQ1R2 is an automotive-grade 500mA, 40V low-dropout linear regulator with fast transient response and fixed output voltage in a TO-252 package. Supports input voltages from 6V to 40V with a typical dropout voltage of 0.39V. Available from stock worldwide with AEC-Q100 qualification for automotive applications.

Translation Transceiver 1 Element 8 Bit per Element 3-State Output 24-VQFN (5.5x3.5)