Texas Instruments

66AK2G12ABY60 is a dual-core ARM Cortex-A15 and DSP SoC by Texas Instruments for high-performance embedded processing. Key specs: 600MHz clock, 625-ball BGA package, 0.945V core supply. From $45.00, in stock with worldwide shipping.

Use the download button to access the DRV5032DULPGM schematic symbol, PCB footprint, and 3D model.

TMS320VC5509AGBBR is a 16-bit fixed-point DSP from Texas Instruments with a 200 MHz clock, 21-bit address bus, and boundary-scan JTAG, housed in a 179-ball BGA package for -40 to 85 degree C operation. Designed for low-power audio and telecom signal processing. From $12.00 in stock worldwide shipping.

Texas Instruments TMAG5170A1QDGKR is an automotive-grade 3D linear Hall-effect position sensor with a 4-wire SPI interface, 2mA output current capability, and a 3mm x 3mm x 1.1mm surface-mount package. It provides high-resolution magnetic field sensing across X, Y, and Z axes for precise position and angle measurement. Available from stock worldwide with fast shipping.

Use the download button to access the BQ29737DSER schematic symbol, PCB footprint, and 3D model.

Texas Instruments ISOW1412DFM is an isolated RS-485/RS-422 transceiver integrating a low-emissions, low-noise, high-efficiency DC-DC converter in a single 20-pin SOIC package. It provides 5 kV reinforced isolation with up to 500 kbps data rate and supports EIA-485 and EIA-422 standards for industrial communication networks.

Board Mount Temperature Sensors Analog Temp Sensor

SENSOR HALL ANALOG SOT23-3

Texas Instruments ISO7821LLDWR is a 2-channel, 100 Mbps digital isolator in a 16-pin wide-body SOIC package with reinforced isolation up to 5 kV peak. It provides bidirectional signal isolation for SPI, UART, and GPIO interfaces in industrial and medical applications. Available from authorized distributors with worldwide shipping.

RS-422/RS-485 Interface IC Low-Power RS-485/RS-422 Multipoint Transceiver 8-SOIC -40 to 85

The Texas Instruments TMS320F28384DZWTS is a dual-core C28x real-time microcontroller with a Connectivity Manager, running at 200 MHz with 1 MB Flash and integrated CLA, ePWM, and ADC in a BGA package. It is designed for high-performance motor control, digital power conversion, and industrial automation requiring real-time deterministic processing. Available from $25.00 in stock with worldwide shipping.

Precision Amplifiers Ultra-high precision (2 uV), zero-drift (0.003 uV/C), low-input-bias-current op amp (single)

The TLV840NADH29DBVR is a voltage supervisor and reset IC from Texas Instruments, featuring a single-channel adjustable threshold with programmable reset delay in a compact SOT-23-5 package. It monitors supply voltage integrity and generates a reset signal to protect microcontrollers and digital systems from undervoltage conditions. Available in tape-and-reel format, in stock with worldwide shipping.

TPS548B28RWWR is a 20A synchronous step-down PWM switching voltage regulator by Texas Instruments in a compact 21-pin QFN package. Key specs: 2.7V to 16V input voltage range, PWM control, Pb-free construction. From $4.00, in stock with worldwide shipping.

Precision Amplifiers Ultra-high precision (2 uV), zero-drift (0.003 uV/C), low-input-bias-current op amp (single)

UC2824DW is a high-speed PWM switching controller with current/voltage-mode control by Texas Instruments. Key specs: 10V to 30V input range, 15V nominal, current-mode and voltage-mode dual operation in 16-pin SOIC. From $1.50, in stock with worldwide shipping.

Analog to Digital Converters - ADC Dual 500kHz 2+2 Ch Simltns Smplng ADC

The TXU0304-Q1 is an automotive-qualified 4-bit unidirectional voltage level translator by Texas Instruments. Key specs: 4 channels, 1.2 V to 3.6 V on A-side, 1.65 V to 5.5 V on B-side, AEC-Q100 qualified. From stock with worldwide shipping.

RF Transceiver 76-GHz to 81-GHz automotive second-generation high-performance MMIC 161-FC/CSP -40 to 140

TLV840MADL52DBVR is a low-voltage supervisor IC with adjustable reset time delay and manual reset by Texas Instruments in a 5-pin SOT-23 package. Key specs: single-channel, adjustable threshold, programmable reset delay, Pb-free. From $0.60, in stock with worldwide shipping.

GALILEO FLIPCHIP

TLV840MADL08DBVR is a single-channel low-voltage supervisor and reset IC with an adjustable reset time delay and manual reset input, housed in a 5-pin SOT-23 package. It monitors supply voltages with programmable threshold detection and generates a reliable reset pulse with user-selectable delay from milliseconds to seconds. Available from stock worldwide with fast international shipping.

The TPS61200DRCT is a synchronous boost converter from Texas Instruments that operates from an ultra-low 0.3 V input up to 5.5 V, featuring 1.3 A integrated switches and adjustable output voltage from 1.8 V to 5.5 V in a 10-pin SON package. It is optimized for single-cell battery and energy-harvesting power supplies. Available from stock worldwide with competitive pricing and fast shipping.

Texas Instruments ADS1278SHKP is a dc-dc converter for electronic assemblies. It is specified around 84 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

Texas Instruments CD4046BF is a CMOS phase-locked loop (PLL) IC operating from 3 V to 18 V with an on-chip VCO, phase comparators, and source follower in a 16-pin ceramic DIP package. It supports frequencies from DC to several MHz and is suited for frequency synthesis and demodulation. Available in stock worldwide with fast shipping from authorized distributors.

SM72480SD-120/NOPB is a factory-preset temperature switch and sensor from Texas Instruments, operating from 1.6V supply with ±2.3°C accuracy over a -50°C to 150°C range. Features short circuit protection and ultra-low 16µA maximum operating current in a miniature 6-pin WSON package. Available lead-free from authorized distributors with worldwide shipping.

Gate Drivers Automotive 40-V, 4-channel half-bridge smart gate driver with inline current sense amplifier

Use the download button to access the TLV76701DGNR schematic symbol, PCB footprint, and 3D model.

TLV840CADL29DBVR is a low-voltage supervisor IC from Texas Instruments with programmable reset time delay, supporting a 2.9 V threshold. Housed in a compact 5-pin SOT-23 package, it operates from -40°C to 125°C with a 27-spec profile. Available in tape and reel format for automated assembly worldwide.

Texas Instruments TPS6508700RSKR is a 14-channel integrated power-management unit (PMU) targeting application processors, with input voltages from 5.6V to 21V in a 64-pin VQFN-EP package. It integrates multiple adjustable DC-DC converters and LDO rails for complete SoC power sequencing. Available from stock worldwide with fast shipping.

16-bit Microcontrollers - MCU Ultra low power Micro Controller

LM22678QTJE-5.0/NOPB is a 5A step-down switching voltage regulator from Texas Instruments in a 7-pin PSSO package. It operates from 4.5V to 42V input with PWM voltage-mode control and a fixed 5.0V output. From $4.00, available in stock with worldwide shipping.

Linear Voltage Regulators 3 Pin 1.5A Fixed 5V Pos Vltg Reg

Operational Amplifiers - Op Amps Quad 1MHz, 16-V rail-to-rail input/output, low-offset voltage, low-power op amp 14-QFN -40 to 125

Texas Instruments TPS78510QWDRBRQ1 is an automotive-grade 1A fixed LDO linear regulator with high-accuracy output and a typical 315mV dropout voltage. It supports input voltages from 1.7V to 6V and is AEC-Q100 qualified for harsh automotive environments. Available from stock worldwide with competitive pricing and fast shipping.

Microprocessors - MPU Sitara ARM MPU

Texas Instruments TPS7A2055PDBVR is a 300 mA ultra-low-noise, low-IQ LDO linear regulator with high PSRR in a 5-pin SOT-23 package. Features 145 mV maximum dropout voltage, 0.033% line regulation, and input up to 6 V. Available from stock with worldwide shipping.

Texas Instruments TL7757CLPE3 is a precision voltage supervisor and reset IC with a fixed 4.55 V reset threshold in a compact 3-pin package. It provides reliable single-channel supply monitoring for microprocessor and microcontroller systems. Available in stock with worldwide shipping.

The TL780-05CKTTR is a fixed 5 V linear voltage regulator from Texas Instruments supporting input voltages from 7 V to 30 V with a 2 V dropout voltage. It offers excellent line regulation of 0.005% maximum and is housed in a 3-pin TO-252 package. Available worldwide with fast shipping and competitive pricing.

TPS63060MDSCTEP is a high-efficiency buck-boost switching regulator operating from 2.5 V to 12 V input with current-mode PWM control. Provides adjustable output from 2.5 V to 8 V for seamless battery-to-regulated-rail conversion in portable systems. Available in compact 10-pin PDSO package with worldwide shipping.

TMS320C6655CZH is a high-performance 32-bit fixed/floating-point DSP from Texas Instruments running at up to 1000 MHz, featuring integrated cache and JTAG boundary scan in the C6655 KeyStone architecture. It supports 16-bit external data bus, 24-bit address bus, and floating-point processing for demanding signal processing workloads. Available from global distributors for telecom, radar, and imaging system designs.

The LM4919MM/NOPB is a Class AB mono audio amplifier IC from Texas Instruments delivering 85 mW output power. It supports a 20 kHz nominal bandwidth with 2-channel input in a compact 10-pin VSSOP package. RoHS compliant and available in stock with worldwide shipping.

Use the download button to access the DRV5011ADDMRT schematic symbol, PCB footprint, and 3D model.

TPD2E001DRYRG4 is a low-capacitance 2-channel ESD protection diode array from Texas Instruments for high-speed data interfaces. Features a 0.95 V forward voltage, 11 V minimum breakdown voltage, and 16 V maximum clamping voltage in a compact SOT-563 package. Available from stock worldwide with fast shipping.

The TPS54140ADRCR is a 1.5A step-down DC-DC converter accepting 3.5V to 42V input with Eco-Mode for high efficiency at light loads. Features current-mode PWM control with integrated high-side MOSFET in a compact 10-pin WSON package.

Single-channel eFuse hot-swap controller supporting 2.7 V to 24 V input, with adjustable current limiting and fault protection in a compact 24-pin VQFN package. Provides inrush control, overcurrent, and overvoltage protection for board-level power paths. Available in tape-and-reel with worldwide shipping.

Use the download button to access the CSD16340Q3 schematic symbol, PCB footprint, and 3D model.

Board Mount Current Sensors Automotive, precisio n isolated current

Operational Amplifiers - Op Amps Hi-Vltg Hi-Current Exc Output Swing