Texas Instruments

Use the download button to access the DRV5011ADDMRT schematic symbol, PCB footprint, and 3D model.

TPD2E001DRYRG4 is a low-capacitance 2-channel ESD protection diode array from Texas Instruments for high-speed data interfaces. Features a 0.95 V forward voltage, 11 V minimum breakdown voltage, and 16 V maximum clamping voltage in a compact SOT-563 package. Available from stock worldwide with fast shipping.

The TPS54140ADRCR is a 1.5A step-down DC-DC converter accepting 3.5V to 42V input with Eco-Mode for high efficiency at light loads. Features current-mode PWM control with integrated high-side MOSFET in a compact 10-pin WSON package.

Single-channel eFuse hot-swap controller supporting 2.7 V to 24 V input, with adjustable current limiting and fault protection in a compact 24-pin VQFN package. Provides inrush control, overcurrent, and overvoltage protection for board-level power paths. Available in tape-and-reel with worldwide shipping.

Use the download button to access the CSD16340Q3 schematic symbol, PCB footprint, and 3D model.

Board Mount Current Sensors Automotive, precisio n isolated current

Operational Amplifiers - Op Amps Hi-Vltg Hi-Current Exc Output Swing

Switching Voltage Regulators 10-A automotive buck converter optimized for power density and low EMI 16-VQFN-HR -40 to 150

The LM61495Q3RPHRQ1 is a 10-A automotive buck converter switching regulator from Texas Instruments, optimized for high power density and low EMI. It accepts a wide 3V to 36V input range in a 16-pin VQFN-HR package rated from -40C to 150C, using current-mode PWM/PFM control for efficient automotive power conversion.

Texas Instruments TPS7A20285PDBVR is a fixed 300 mA ultra-low-noise LDO linear regulator in a SOT-23-5 package. It operates from 3.15 V to 6 V input with a maximum dropout of 145 mV and 0.019% maximum load regulation. Available from stock with worldwide shipping.

The TPS7A2031PDBVR is a 300 mA ultra-low-noise, high-PSRR LDO linear regulator from Texas Instruments with a 1.6 V to 6 V input range and 145 mV maximum dropout voltage. Its fixed output and 0.019% maximum load regulation make it ideal for sensitive RF and analog signal chains. Available in a 5-pin SOT-23 package on tape-and-reel.

Switching Voltage Regulators 3-V to 65-V, 0.6-A ultra-small synchronous buck converter with 4 A IQ 9-VQFN-HR -40 to 150

Texas Instruments TMCS1101A3UQDRQ1 is an automotive-grade AEC-Q100 precision isolated current sensor with analog voltage output and galvanic isolation, housed in a 4.9 mm × 3.9 mm surface-mount plastic package. It provides high-accuracy current measurement in 400 V+ isolated systems. Available in stock with worldwide shipping.

TMAG5273A1QDBVT is a low-power 3-axis linear Hall-effect sensor with I2C interface, measuring magnetic fields from -80 mT to +80 mT and consuming a maximum of 3 mA in a 6-pin SOT-23 package measuring just 2.9 × 1.6 × 1.1 mm. It suits position sensing, rotation detection, and current sensing in automotive and industrial designs. Available from stock with worldwide shipping.

UCD7230RGWR is a single-channel low-side MOSFET gate driver by Texas Instruments with 4 A peak output current and standard input logic. Key specs: 4 A peak drive, standard logic input, 20-pin QFN package. From $1.80, in stock with worldwide shipping.

TMAG5273A2QDBVR is a low-power 3D Hall-effect magnetic sensor with I2C interface by Texas Instruments. Key specs: ±266 mT magnetic field range, SOT-23 (6-pin) package, automotive-grade. Available from stock with worldwide shipping.

UCC3808APWTR-2 is a current-mode PWM switching controller by Texas Instruments with 4.3 V to 14 V input range. Key specs: 500 kHz maximum switching frequency, 8-pin SOIC package, and internal soft-start circuitry. Available from stock with worldwide shipping at competitive pricing.

CD47HC4059 is a high-speed CMOS programmable divide-by-N counter in a 24-pin SOIC package, operating from 2 V to 6 V supply. Supports programmable division ratios and high-frequency clock division for frequency synthesis. From $2.10 in stock with worldwide shipping.

TMAG5273A2QDBVT is a low-power linear 3D Hall-effect sensor from Texas Instruments with I2C interface, ±266 mT measurement range, and up to 3 mA operating current in a SOT-23-6 package. It delivers precise magnetic field sensing across X, Y, and Z axes for automotive-grade applications. Available from stock with worldwide shipping.

TPSM13604HNDWR is a 4 A step-down power module with integrated inductor by Texas Instruments, operating from 5 V to 36 V input. Key specs: 4 A output current, 24 V nominal input, constant-on-time control. From competitive pricing, in stock with worldwide shipping.

TPS92551TZ/NOPB is a constant-current buck LED driver from Texas Instruments supporting up to 450 mA and 23 W output. Integrates single-channel dimming control in a compact 7-pin SOT package. RoHS-compliant and available from stock with worldwide shipping.

Use the download button to access the OMAPL138EZWTD4 schematic symbol, PCB footprint, and 3D model.

TLV3605RVKT is a high-speed single analog comparator from Texas Instruments with 800 ps propagation delay and LVDS-compatible outputs in a 12-pin WQFN package. Rail-to-rail inputs support comparison across the full supply range with a 5 mV maximum offset voltage. Available from stock with worldwide shipping.

SIMPLE SWITCHER® 4.2-V to 80-V, 2-A synchronous buck converter with 40-µA IQ

AMC3302-Q1 is an automotive-grade reinforced isolated amplifier from Texas Instruments with ±250 mV input range, 12-bit resolution, and up to 8 kVrms isolation in a small outline package. It provides galvanically isolated current-shunt measurement for motor drives and battery management systems. Available from stock with worldwide shipping.

The TPS628682ARQYR is a synchronous step-down switching regulator from Texas Instruments supporting 2.4 V to 5.5 V input and delivering up to 4 A output current using PWM current-mode control. It targets compact IoT and wearable designs with a 9-pin WQFN package. Available worldwide with fast shipping.

TPS542A52RJMR is a 4 A synchronous step-down converter with 4 V to 18 V input range and voltage-mode PWM plus PFM control. It delivers regulated output with high efficiency across load conditions. Available from $2.50 with worldwide shipping and in stock.

Audio Amplifiers 20-W Audio Power Amplifier 5-TO-220 0 to 70

The TMCS1107A3UQDR is a 420 V isolated Hall-effect current sensor with analog voltage output in an 8-SOIC package. It offers ±50 A measurement range with 18.75 mV/A sensitivity and operates from -40°C to 85°C. Available from stock worldwide with competitive pricing for industrial power monitoring applications.

TPS259470ARPWR is a single-channel input fault protection controller by Texas Instruments. It supports input voltages from 2.7 V to 23 V with adjustable threshold and overcurrent protection. Available in a compact 10-pin VQFN package with RoHS-compliant e3 rating.

Use the download button to access the DRV8212DRLR schematic symbol, PCB footprint, and 3D model.

1AStep-DownVoltageRegulato

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 3.6V - - 4A 2.95V - 6V Input

TPS7A4525KTTR is a fixed 2.5V, 500mA ultra-low-noise LDO linear regulator by Texas Instruments. Key specs: 3V to 20V input range, 0.3V typical dropout, 36dB PSRR at 1 kHz. Available in stock with worldwide shipping.

The TPS62046DRCR is a voltage-mode PWM step-down switching regulator accepting 2.5V to 6V input in a compact 10-pin SON package. It features selectable PFM mode for light-load efficiency and delivers regulated output for portable power rails. Available from Texas Instruments with worldwide distribution.

TPS7A0215PDQNR is a 200 mA nanopower LDO voltage regulator by Texas Instruments with only 25 nA quiescent current, 1.5 V to 6 V input range, and enable pin in a tiny X2SON-4 package. Available from stock with worldwide shipping.

XPS629210DRLR is a voltage-mode PWM switching regulator IC by Texas Instruments with PFM control also available, supporting input voltages from 3 V to 17 V (nominal 12 V). Key specs: single function, 8-lead SO flat lead (SOIC-8) package, wide input range. From competitive pricing, in stock with worldwide shipping.

TPS61043DRBT is a constant-current LED driver IC from Texas Instruments. It delivers up to 1-channel LED drive with adjustable output current and wide input voltage range of 2.7 V to 5.5 V. Available from stock worldwide with fast shipping.

Automotive 500-mA, 40-V ultra-low-IQ LDO linear voltage regulator with power-good output. Supports 4.3 V to 40 V input, 3.3 V fixed output, and operates from -40°C to 150°C. Available from authorized distributors with worldwide shipping.

TPS62301DRCR is a high-efficiency step-down DC-DC converter by Texas Instruments featuring pulse-width modulation control. Key specs: 2.7 V to 6 V input, voltage-mode control, 10-pin PDSO package. From $0.50, in stock with worldwide shipping.

TPS61042DRBT is a boost converter LED driver with a 30 V switch voltage and 500 mA switch current. It features adjustable LED current control and PWM dimming. Available in SOT-23 package with worldwide shipping.

Texas Instruments TSER953RHBR is a 4-lane MIPI CSI-2 V-by-One HS serializer operating at up to 4.16 Gbps aggregate throughput in a compact 32-pin QFN package. It bridges camera sensor outputs to remote display or processing subsystems with worldwide shipping available.

Shunt Voltage Reference IC Fixed 1.235V V ±1% 20 mA TO-92-3

The LM2903NNS is a dual general-purpose voltage comparator from Texas Instruments, housed in an 8-pin PDIP package and compatible with CMOS, TTL, DTL, ECL, and MOS logic families via open-collector outputs. It operates from a wide supply voltage range for versatile circuit interfacing. Available in stock from global distributors with worldwide shipping.

The TPS78430QWDRBRQ1 is an automotive-grade 300mA fixed-output LDO voltage regulator with ultra-low 0.115V dropout voltage and high PSRR in an 8-pin SON package. It operates from 3.5V to 6V input and meets AEC-Q100 automotive qualification for vehicle electronics. Available from Texas Instruments with worldwide distribution.

TPS77601QPWPRG4CT is a 1 A adjustable low-dropout linear regulator by Texas Instruments with a typical dropout of 450 mV and an input voltage range of 2.7 V to 10 V. Key specs: 1 A output current, adjustable output voltage, AEC-Q100 qualified -40°C to 125°C operation in a 14-pin TSSOP package. From competitive pricing, in stock with worldwide shipping.

Low Power Multivibrator

Texas Instruments TPS543620RPYR is a current-mode PWM synchronous buck regulator accepting 4 V to 18 V input in a compact QFN-14 package. Designed for 12 V nominal bus conversion with high efficiency across load. Available from stock with worldwide shipping.

Texas Instruments LM741J-14/883 is a military-grade voltage-feedback operational amplifier with up to 90 dB CMRR, 6000 µV max input offset voltage, and internal frequency compensation in a 14-pin ceramic DIP package. From $12 in stock worldwide shipping.

TL071HIDCKR is a high-input-impedance JFET-input operational amplifier with 105 dB CMRR and 0.005 µA max bias current. It operates on ±15V dual supply with low noise for precision analog signal conditioning. Available in compact SOT-23-5 package for space-constrained designs.