Texas Instruments

The TCA39306DTMR is a 2-bit FM+ I2C bus and SMBus voltage level translator with open-drain outputs and up to 46ns propagation delay in an 8-pin WSON package. It enables bidirectional voltage translation between mismatched logic levels in I2C and SMBus systems. Available from stock worldwide at competitive prices.

TPS7A1128PYKAR is a positive fixed low-dropout linear voltage regulator from Texas Instruments delivering 500mA at 3.3V with a maximum dropout voltage of 0.13V. It is housed in a compact 5-ball DSBGA package for ultra-small form factor designs. Available from authorized distributors worldwide with reliable stock and fast shipping.

AEC-Q100 qualified Hall-effect current sensor with 1% high precision and basic isolation, supporting up to 600V working voltage. Delivers accurate bidirectional current measurements without shunt resistors or opto-isolators. Available from Texas Instruments in stock with worldwide shipping.

The TPS7A1006PYKAR is an ultra-low dropout (LDO) linear voltage regulator from Texas Instruments with a fixed output voltage, 70mV maximum dropout voltage, and an input voltage range of 0.75V to 3.3V in a 5-ball DSBGA package. It delivers low-noise regulated output for powering sensitive analog and digital loads in compact portable designs. Available in stock from authorized distributors worldwide with reliable fast shipping.

Digital Bus Switch ICs 16B FET Bus Switch

The TPS22990DMLT is a single-channel resistor-controlled load switch from Texas Instruments, supporting 0.6 V to 5.5 V input voltage and up to 10 A continuous load current in a compact 10-pin DML package. An adjustable slew-rate resistor controls inrush current limiting, making it ideal for hot-swap and power sequencing circuits. Available in tape-and-reel with worldwide shipping for industrial, server, and high-current consumer power management applications.

1.5-A, negative, adjustable linear voltage regulator

The LM1117ILD-ADJ/NOPB is an adjustable 800mA low dropout linear voltage regulator from Texas Instruments, supporting input voltages from 2.6V to 15V with a typical 1.2V dropout voltage for flexible output voltage programming. Key specs include 800mA output current, adjustable output voltage, -40°C to 125°C industrial temperature range, and 8-pin WSON package. Available lead-free (NOPB) from global distributors in stock with worldwide shipping.

Texas Instruments TPS61202DRCT is a current-mode PWM boost switching regulator providing fixed 5V positive output with 1.2A switch current from a 0.3V to 5.5V input range in a compact 10-pin VFDFN exposed-pad package. Available from stock with worldwide shipping.

Display Drivers & Controllers DLP® 0.65 1080p s600 DMD 350-CPGA

Linear Voltage Regulator IC Positive Fixed 1 Output 50mA TO-252-3

Switching Voltage Regulators 4.2-V to 60-V, 1.5-A ultra-small synchronous step-down converter 12-VQFN-HR -40 to 150

Flip Flops Dual Master/Slave

Texas Instruments TUSB217ARWBRQ1 is a USB 2.0 high-speed signal conditioner with integrated DCP and CDP charging controllers in a 12-pin X2QFN package. Supports operating temperatures from -40 to 105°C for automotive-grade reliability. Available from authorized distributors with worldwide shipping.

TMS320VC5509AZAYR is a 16-bit fixed-point digital signal processor from Texas Instruments in 179-pin NFBGA package. Key specs include 20MHz max clock, 21-bit address bus, 1.2V/1.35V supply options, and -40 to 85°C temperature range. Available from stock with worldwide shipping.

The TL494CDBR is a versatile voltage-mode PWM controller IC from Texas Instruments supporting buck, boost, flyback, forward, full-bridge, half-bridge, and push-pull converter topologies with a 7 V to 40 V input range. It delivers up to 250 mA output current with precision pulse width modulation control in a compact 16-pin SSOP package. Available from stock worldwide with fast shipping for power supply design projects.

Battery Chargers 500-mA 1-cell linear charger with 10-nA IQ, power path, regulated system voltage, 16-bit ADC and LDO 20-DSBGA -40 to 85

The TPS22960RSER is a dual-channel high-side power switch from Texas Instruments with 0.5A current capacity and 0.848-ohm on-resistance per channel supporting 1.62V to 5.5V input range. It features two independent load switch channels in a compact 8-pin UQFN package ideal for space-constrained power management designs. Available from global distributors in tape-and-reel packaging with in-stock inventory for prompt worldwide delivery.

Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-TO-92 -40 to 125

The TPS7B8650QKVURQ1 is an automotive-grade 500mA ultra-low quiescent current LDO regulator from Texas Instruments with 40V input rating and power-good output in a 5-pin TO-252 package. It features only 0.37V typical dropout voltage and operates across a -40°C to 150°C temperature range. Available from stock worldwide with AEC-Q100 qualification for automotive designs.

The TPS78401QWDRBRQ1 is an automotive-qualified, adjustable ultra-low-dropout LDO voltage regulator from Texas Instruments with 115 mV typical dropout voltage and 1.65V to 6V input range. It delivers high PSRR and low noise output for sensitive analog and RF power rails in AEC-Q100 qualified automotive systems. Available in 8-pin WSON package with worldwide shipping.

The TPS62086RLTR is a 3A synchronous step-down DC-DC converter from Texas Instruments featuring DCS-Control for fast transient response, operating from a 2.5V to 6V input with adjustable output from 0.8V to 6V. It supports both PWM and PFM control modes for high efficiency across a wide load range, housed in a compact 7-pin QFN package. In stock from authorized distributors with worldwide shipping.

TXU0304RUTR is a unidirectional 4-channel voltage level translator from Texas Instruments' TXU family supporting up to 200 Mbps data rates. It operates with active-high enable control and a 5 pF load capacitance in a compact 12-pin UQFN (1.7x2 mm) package. Available in stock worldwide with competitive pricing and fast shipping.

TEXAS INSTRUMENTS - BQ51013ARHLR - INTEGRATED WIRELESS POWER SUPPLY RECEIVE

The LM7805CK is a fixed 5 V series linear voltage regulator from Texas Instruments accepting 7.5 V to 20 V input with a maximum absolute rating of 35 V. It features 0.05% line and load regulation and 2 V nominal dropout voltage in a 2-pin metal can (TO-39) package. Available in stock with worldwide shipping.

TMUX1309QBQBRQ1 is an automotive-grade dual 4:1 differential analog multiplexer with 500MHz bandwidth in a 16-pin QFN package. AEC-Q100 qualified with 2 independent channels and wide signal bandwidth for high-speed signal routing. From $2.50 in stock with worldwide shipping.

Inverter IC 6 Channel 14-VQFN (3.5x3.5) 1.65V ~ 3.6V 10 µA 24mA, 24mA -40°C ~ 85°C Surface Mount

Texas Instruments TLV76725DGNR is a 1A fixed-output LDO linear regulator with 2.5V input range up to 16V and 2.5V output. Features 900mV typical dropout voltage and -40°C to 125°C operation in compact 8-pin HVSSOP package. Available from stock worldwide with competitive pricing and fast worldwide shipping.

Use the download button to access the DRV5055A4QLPGM schematic symbol, PCB footprint, and 3D model.

TPS628100MQWRWYRQ1 is an automotive-grade 4A step-down DC-DC converter with 2.75V to 6V input range and PWM/PFM control modes. Features a compact 2mm x 3mm wettable-flanks QFN package for high-density board designs. AEC-Q100 qualified for reliable automotive use, available with worldwide shipping.

Operational Amplifiers - Op Amps Automotive, single, 40-V 4.5-MHz low-power operational amplifier 5-SOT-23 -40 to 125

Use the download button to access the LP38502TS-ADJ/NOPB schematic symbol, PCB footprint, and 3D model.

The TLV3601DCKR is a single high-speed analog comparator from Texas Instruments with push-pull output, 5 µA maximum bias current, and 5 mV maximum input offset voltage. It delivers fast propagation delay suitable for threshold detection and zero-crossing detection in a tiny 5-pin SOT-23 package. Available from stock worldwide with competitive pricing.

Use the download button to access the INA2191A4IYBJR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN74HCS240RKSR schematic symbol, PCB footprint, and 3D model.

Battery Management Standalone 1-cell 800-mA linear battery charger in a WCSP package

LM4041BIZ-1.2/NOPB is a precision shunt voltage reference from Texas Instruments with a 1.225 V nominal output and tight ±0.5% initial accuracy. It operates as a two-terminal device sinking up to 12 mA and is specified over the industrial -40°C to +85°C temperature range. Supplied in a through-hole TO-92 package for easy prototyping and low-cost production boards.

The TLV75515PDQNR is a 500mA high-PSRR, low-quiescent-current, low-dropout linear voltage regulator from Texas Instruments with an enable pin, fixed 1.5V output, and an input voltage range of 2V to 5.5V in a compact 4-pin X2SON package. It features a maximum dropout voltage of 425mV at full load, making it ideal for battery-powered and space-constrained applications. Available in stock from major distributors worldwide with fast shipping.

Texas Instruments TMP1075NDRLT is a 12-bit digital temperature sensor with maximum 1°C accuracy and ultra-low operating current of 0.004mA. Features I2C-compatible interface in a miniature 1.6x1.2mm surface-mount package. Available in stock worldwide with competitive pricing and fast shipping.

LDO Voltage Regulators 3-A, 7V, ultra-low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125

Switching Voltage Regulators 5A Flyback Reg-1

V-Ref Precision 2.5V 10mA 3-Pin TO-92 T/R

Use the download button to access the ISOW7741DFMR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TMS320LF2406PZA is a 16-bit fixed-point DSP microcontroller with 64KB Flash in a 100-pin LQFP package. Features 20MHz max clock, 16-bit address and data buses, barrel shifter, and boundary scan support. Available from stock with worldwide shipping.

The TLVH431AILPR is a two-terminal adjustable shunt voltage reference from Texas Instruments with an output voltage range of 1.228V to 1.252V and maximum output current of 80mA. It is RoHS compliant and housed in a tiny SOT-23 3-pin package for space-constrained designs. Available from authorized distributors worldwide with fast shipping.

Analog to Digital Converters - ADC 16B ADC

Gate Drivers 600-V 70m GaN with integrated driver and protection 32-VQFN -40 to 125

Buffers & Line Drivers SNGL Bus Buffer Gate

Use the download button to access the LM62460Q3RPHRQ1 schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 3-A, 85-V, 2.2-MHz wide VIN boost, flyback, & SEPIC converter with dual random spread spectrum