STMicroelectronics

STM1813LWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Open Drain, reset 3-Pin SOT-23

Flip Flop, D-Type Bus Interface, PDIP20

SOT-23, 5 PIN

STM1818TWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Open Drain, reset 3-Pin SOT-23

STMicroelectronics STM6322MWY6F is a single-channel voltage supervisor and reset IC with manual reset, overvoltage and undervoltage detection in a 5-pin SOT-23 package. Fixed threshold monitoring ensures reliable system startup and protection. Available from stock with worldwide shipping.

Reset Circuit 2.55V Low Power STM1815RWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Push-Pull, 3-Pin SOT-23

STM1001SWX6F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Open Drain, 3-Pin SOT-23

ROHS COMPLIANT, SOT-23, 3 PIN

SOT-23, 5 PIN

STM1816SWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Open Drain, 3-Pin SOT-23

NVRAM 16KBit 5V ZEROPOWER SRAM 70ns M48Z12-70PC1, NVRAM Memory 16kbit Through Hole, 4.5 → 5.5 V, 0 → +70 °C, 24-Pin, PCDIP

STM1817RWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active High, Push-Pull, 3-Pin SOT-23

STM1061N30WX6F, Voltage Detector 2.94V Low Power Voltage Detector 3-Pin SOT-23

ROHS COMPLIANT, SOT-23, 3 PIN

STMicroelectronics STM1810MWX7F is a voltage supervisor and reset IC monitoring 3 V, 3.3 V, or 5 V rails with active-low push-pull output in a tiny 3-pin SOT-23 package. Single-channel design simplifies power sequencing. Available from stock with worldwide shipping.

STM1815SWX7F is a single-channel voltage supervisor and reset IC by STMicroelectronics with a fixed threshold and active-low reset output. Key specs: fixed reset threshold, single-channel monitoring, and ultra-compact 3-pin SOT-23 package. Available from stock with worldwide shipping.

The STM1815TWX7F is a single-channel voltage supervisor and reset IC with a fixed threshold in a 3-pin SOT-23 package. It monitors supply rails and asserts a reset signal when voltage drops below the preset trip point, ensuring reliable system startup. Available worldwide with fast shipping from global distributors.

STM1813MWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Open Drain, reset 3-Pin SOT-23

STM1061N25WX6F, Voltage Detector 2.45V Low Power Voltage Detector 3-Pin SOT-23

STM1810LWX7F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Push-Pull, 3-Pin SOT-23

STM1061N38WX6F, Voltage Detector 3.724V Low Power Voltage Detector 3-Pin SOT-23

3 X 3 MM, ROHS COMPLIANT, MSOP-8

STM1061N28WX6F is a low-power voltage detector from STMicroelectronics with a precise 2.744V threshold. It features a single-channel monitoring function in a compact SOT-23 3-pin package. Available from authorized distributors worldwide with fast shipping.

STM1061N31WX6F, Voltage Detector 3.038V Low Power Voltage Detector 3-Pin SOT-23

STM1061N16WX6F, Voltage Detector 1.568V Low Power Voltage Detector 3-Pin SOT-23

Telecom transient arrestor,SMP100LC-65 STMicroelectronics SMP100LC-65, Bi-Directional TVS Diode, 2-Pin DO-214AA

The STM1061N26WX6F is a low-power fixed-threshold 2.548V voltage detector from STMicroelectronics designed to monitor supply rails and assert a reset or interrupt signal when voltage falls below the preset threshold. It integrates precision voltage sensing in an ultra-compact 3-pin SOT-23 package with minimal external components. Available from stock worldwide with competitive pricing for power monitoring applications.

The STB9NK60ZT4 is an N-Channel 600V Power MOSFET from STMicroelectronics featuring 7A continuous drain current, 0.95Ω maximum RDS(on), a built-in body diode, and 235mJ avalanche energy rating for robust unclamped inductive switching protection. It is housed in a D²PAK-3 surface-mount package and is fully RoHS compliant. Available in stock worldwide with competitive pricing for power supply and switching applications.

The STGY40NC60VD is an N-channel IGBT transistor rated at 600V collector-emitter voltage and 80A maximum collector current with a built-in freewheeling diode in a 3-pin MAX247 package. It features a 5.75V maximum gate-emitter threshold voltage and 20V gate drive rating for reliable high-power switching. Available from stock worldwide at competitive prices.

STM1061N27WX6F, Voltage Detector 2.646V Low Power Voltage Detector 3-Pin SOT-23

DPAK-3

The STM1001TWX6F is a single-channel voltage supervisor and reset monitor IC from STMicroelectronics supporting 3 V, 3.3 V, and 5 V system rails with an active-low, open-drain output. It is housed in a compact 3-pin SOT-23 package for reliable power-on reset generation in embedded designs.

STM1061N22WX6F, Voltage Detector 2.156V Low Power Voltage Detector 3-Pin SOT-23

STM1061N19WX6F, Voltage Detector 1.862V Low Power Voltage Detector 3-Pin SOT-23

8 A, 600 V short-circuit rugged IGBT

STM1001LWX6F, Reset Monitor 3 V, 3.3 V, 5 V Active Low, Open Drain, 3-Pin SOT-23

ROHS COMPLIANT, SOT-23, 3 PIN

STMicroelectronics STGW20NC60VD is an ultra-fast N-channel IGBT rated at 600 V collector-emitter voltage and 60 A collector current with a built-in anti-parallel diode, housed in a 3-pin TO-247 through-hole package. Designed for high-frequency inverter and motor drive switching applications.

The STGP6NC60HD is an N-channel IGBT rated at 600 V collector-emitter voltage and 15 A continuous collector current. It integrates a built-in fast recovery antiparallel diode and features a maximum gate-emitter threshold voltage of 5.75 V with a 20 V gate oxide limit. Housed in a TO-220AB package, it targets motor drive inverters, switch-mode power supplies, and induction heating applications operating from mains voltage.

STGP7NC60HD is a 600V, 25A single IGBT with a built-in freewheeling diode from STMicroelectronics, featuring a 20V maximum gate-emitter voltage and 5.75V gate threshold. It is housed in a 3-pin TO-220AB package for high-voltage switching applications. This part is in stock and ships worldwide for industrial power designs.

STGP14NC60KD is a single N-channel IGBT from STMicroelectronics rated at 25 A collector current and 600 V collector-emitter voltage, with an integrated anti-parallel diode in a 3-pin TO-220AB package. It features ultra-fast switching optimized for high-frequency inverter applications. The device targets motor drive inverters, UPS systems, and induction heating equipment operating at switching frequencies up to tens of kilohertz.

Use the download button to access the STGP10NC60KD schematic symbol, PCB footprint, and 3D model.

M24C01-WBN6P, EEPROM Memory 1kbit,, 128 x, 8bit, Serial-I2C, 900ns 2.5 → 5.5 V, 8-Pin PDIP

STGB10NB37LZ, IGBT Transistor N-channel, 20 A 375 V, 3-Pin D2PAK

ROHS COMPLIANT, D2PAK-3

The STGD10NC60KDT4 is a 600 V, 10 A N-channel IGBT with short-circuit ruggedness from STMicroelectronics, packaged in a surface-mount DPAK. It integrates a built-in anti-parallel diode and operates across a -55 °C to 150 °C junction temperature range, dissipating up to 62 W. Designed for switched-mode power supplies, motor drives, and low-frequency inverter applications.

The STGB7NC60HD is an N-channel IGBT transistor in a D2PAK (TO-263) package rated at 600 V collector-emitter voltage and 25 A collector current, with a built-in freewheeling diode, targeting motor drive inverters, switch-mode power supplies, and induction heating applications.

The STGB10NB37LZT4 is an N-channel IGBT transistor rated for 375 V collector-emitter voltage and 20 A continuous collector current, featuring an integrated freewheeling diode and gate resistor in a 3-pin D2PAK (TO-263) surface-mount package. It incorporates voltage clamping for enhanced robustness against inductive switching transients, making it suitable for high-reliability power switching applications. Ideal for motor drives, switching power supplies, and induction heating systems operating from mains voltage.

STGB14NC60KD is an N-channel IGBT rated at 600 V collector-emitter voltage and 25 A maximum collector current, with an integrated anti-parallel freewheeling diode. Gate-emitter threshold is up to 6.5 V and maximum gate-emitter voltage is 20 V. The 3-pin D2PAK (TO-263) surface-mount package suits motor drives, inverters, and switching power supplies.

Use the download button to access the STGB10NC60KD 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.