STGP14NC60KD STMicroelectronics Transistor IGBT (Transistor Outline, Vertical) In Stock
STGP14NC60KD is a single N-channel IGBT from STMicroelectronics rated at 25 A collector current and 600 V collector-emitter voltage, with an integrated anti-parallel diode in a 3-pin TO-220AB package. It features ultra-fast switching optimized for high-frequency inverter applications. The device targets motor drive inverters, UPS systems, and induction heating equipment operating at switching frequencies up to tens of kilohertz.
- Manufacturer
- STMicroelectronics
- Package
- Transistor Outline, Vertical
- Pin Count
- 3
- Lifecycle
- ACTIVE
- Datasheet
- STGP14NC60KD Datasheet PDF
- Category
- Transistor IGBT
- Price
- From $0.5850(MOQ 1)
- Temp Range
- ?°C to 150.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 25 A maximum collector current rating
- 600 V collector-emitter breakdown voltage for mains-connected inverters
- Ultra-fast switching for reduced switching losses at high frequencies
- Integrated built-in anti-parallel freewheeling diode
- 7 V maximum gate-emitter threshold voltage for standard gate driver compatibility
- 3-pin TO-220AB package with collector on case for heatsink mounting
- 20 V maximum gate-emitter voltage for robust gate drive margin
Applications
The STGP14NC60KD is used in single-phase and three-phase motor drive inverters where 600 V bus voltage and 25 A load current are typical, such as variable-frequency drives for HVAC compressors and pump motors. Its integrated freewheeling diode simplifies the power stage design by eliminating external rectifiers on each switching node. UPS inverter stages and induction heating resonant converters also benefit from its ultra-fast switching characteristic, which reduces core loss at frequencies above 20 kHz.
Specifications
| Factory Lead Time | 14Weeks |
| YTEOL | 5.25 |
| Additional Feature | ULTRA FAST |
| Case Connection | COLLECTOR |
| Collector Current-Max (IC) | 25A |
| Collector-Emitter Voltage-Max | 600V |
| Configuration | SINGLE WITH BUILT-IN DIODE |
| Gate-Emitter Thr Voltage-Max | 7V |
| Gate-Emitter Voltage-Max | 20V |
| JEDEC-95 Code | TO-220AB |
| JESD-30 Code | R-PSFM-T3 |
| JESD-609 Code | e3 |
| Number of Elements | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | FLANGE MOUNT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Polarity/Channel Type | N-CHANNEL |
| Power Dissipation-Max (Abs) | 80W |
| Qualification Status | Not Qualified |
| Surface Mount | NO |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | THROUGH-HOLE |
| Terminal Position | SINGLE |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Transistor Application | POWER CONTROL |
| Transistor Element Material | SILICON |
| Turn-off Time-Nom (toff) | 340ns |
| Turn-on Time-Nom (ton) | 31.5ns |
| Package | Transistor Outline, Vertical |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| Country of Origin | Mainland China |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What are the key voltage and current ratings of the STGP14NC60KD for motor-drive inverter design?
The STGP14NC60KD is rated for a 600 V collector-emitter breakdown voltage and 25 A maximum continuous collector current. These specifications suit 400 V three-phase AC motor drives where the DC bus typically reaches 560 V to 580 V after rectification, providing a safe 20 V margin below the 600 V rating. At 25 A, the device supports motor outputs up to approximately 10 kW depending on modulation depth and thermal management.
Does the STGP14NC60KD include an integrated freewheeling diode, and why does that matter?
Yes, the STGP14NC60KD integrates a built-in anti-parallel diode between collector and emitter. In a half-bridge inverter switching leg, inductive load current must continue flowing during the dead time between high-side and low-side switching events. The internal diode conducts this freewheeling current without requiring an external co-packaged diode, reducing component count, board area, and parasitic inductance in the switching loop.
What gate drive voltage range is required to switch the STGP14NC60KD reliably?
The STGP14NC60KD has a maximum gate-emitter threshold voltage of 7 V, meaning a positive gate drive of at least 10 V to 15 V is recommended for full saturation and minimum on-state voltage drop. The gate-emitter voltage must not exceed 20 V. Standard IGBT gate driver ICs such as those with ±15 V output swing operate well within these limits and ensure the device turns on fully even across the -40°C to 150°C junction temperature range.
Why is the TO-220AB package practical for cooling in high-power switching applications?
The TO-220AB package connects the collector terminal to the metal tab, allowing direct thermal contact between the high-power dissipating node and an external heatsink. At 25 A with a typical on-state voltage drop near 2 V, the device dissipates roughly 50 W under continuous conduction, which requires a heatsink with thermal resistance below 2°C/W to keep junction temperature within the 150°C maximum rating at 25°C ambient conditions.
At what switching frequencies is the ultra-fast STGP14NC60KD most advantageous?
The ultra-fast switching characteristic of the STGP14NC60KD reduces turn-off tail current duration to the sub-microsecond range, which is most beneficial at PWM switching frequencies between 10 kHz and 50 kHz. At these frequencies, switching loss becomes comparable to or larger than conduction loss, so faster turn-off directly reduces total power dissipation. Induction heating resonant converters and high-density UPS inverters operating above 20 kHz benefit most from this ultra-fast designation.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.6300 | $1.63 |
| 3+ | $1.3200 | $3.96 |
| 10+ | $1.1400 | $11.40 |
| 100+ | $0.9550 | $95.50 |
| 500+ | $0.8870 | $443.50 |
| 1000+ | $0.5850 | $585.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”