STGB7NC60HD STMicroelectronics Integrated Circuit (TO-XXX (Inc. DPAK)) In Stock
The STGB7NC60HD is an N-channel IGBT transistor in a D2PAK (TO-263) package rated at 600 V collector-emitter voltage and 25 A collector current, with a built-in freewheeling diode, targeting motor drive inverters, switch-mode power supplies, and induction heating applications.
- Manufacturer
- STMicroelectronics
- Package
- TO-XXX (Inc. DPAK)
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- STGB7NC60HD Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- ?°C to 150.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 600 V VCES and 25 A IC for medium-power switching applications
- Integrated anti-parallel freewheeling diode eliminates external rectifier
- D2PAK (TO-263AB) surface-mount package for enhanced thermal performance
- Gate-emitter threshold voltage max 5.75 V for logic-level drive compatibility
- Gate-emitter voltage max ±20 V for safe gate drive margin
- N-channel single IGBT for simple half-bridge or full-bridge topologies
Applications
The STGB7NC60HD is used in motor drive inverter stages, induction cooktops, and UPS output stages where 600 V blocking voltage and 25 A conduction current are required. Its integrated freewheeling diode simplifies the power stage design for variable frequency drives, electric power tools, and solar inverter half-bridge circuits.
Specifications
| Pbfree Code | Yes |
| YTEOL | 5.4 |
| Collector Current-Max (IC) | 25A |
| Collector-Emitter Voltage-Max | 600V |
| Configuration | SINGLE WITH BUILT-IN DIODE |
| Gate-Emitter Thr Voltage-Max | 5.75V |
| Gate-Emitter Voltage-Max | 20V |
| JEDEC-95 Code | TO-263AB |
| JESD-30 Code | R-PSSO-G2 |
| JESD-609 Code | e3 |
| Number of Elements | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Polarity/Channel Type | N-CHANNEL |
| Power Dissipation-Max (Abs) | 80W |
| Qualification Status | Not Qualified |
| Surface Mount | YES |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Position | SINGLE |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Transistor Application | POWER CONTROL |
| Transistor Element Material | SILICON |
| Turn-off Time-Nom (toff) | 221ns |
| Turn-on Time-Nom (ton) | 25.5ns |
| Package | TO-XXX (Inc. DPAK) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for STGB7NC60HD:
Gate Bipolar Transistor, 25A I(C), 600V V(BR)CES, N-Channel, TO-263AB
Frequently Asked Questions
Why does the STGB7NC60HD include a built-in diode and how does it simplify motor drive designs?
The built-in anti-parallel diode eliminates the need for an external freewheeling rectifier in each IGBT switch position. In a 3-phase inverter bridge driving a 400 V AC motor, this saves 6 discrete diodes, reduces PCB area by roughly 30%, and lowers bill-of-materials cost while maintaining safe commutation of inductive flyback energy at up to 25 A.
How much gate drive voltage is needed to fully turn on the STGB7NC60HD reliably?
The gate-emitter threshold is specified at a maximum of 5.75 V, meaning the device begins conducting above that level. A gate drive voltage of 15 V is recommended for full saturation and minimum conduction losses, while the gate-emitter absolute maximum rating of ±20 V provides adequate margin for typical isolated gate driver ICs.
For a 2 kW induction heating circuit operating at 230 V AC input, is STGB7NC60HD adequately rated?
Yes. With a 600 V VCES rating, the device safely handles the peak bus voltage of approximately 325 V from a rectified 230 V line plus transient overshoot. At 2 kW output the RMS switch current remains well within the 25 A continuous rating, leaving thermal headroom when mounted on a heatsink rated below 0.5°C/W.
Does the D2PAK package of STGB7NC60HD allow surface-mount assembly in automated production?
Yes, the D2PAK (TO-263AB) package is a surface-mount variant of the through-hole TO-220 outline. It accommodates standard SMT reflow profiles and is compatible with wave solder processes, enabling automated PCB assembly. The exposed metal tab solders directly to a copper pour on the PCB, providing a thermal resistance of approximately 1°C/W junction-to-board.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”