Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
33,526
Total Products
94
Categories
All Texas Instruments Components
Showing 3,601–3,650 of 33,526
Logic Gates Quadruple 2-Input Positive-AND Gates
The SN7486N3 is a quad 2-input XOR gate IC from Texas Instruments in the standard TTL logic family, containing four independent exclusive-OR gates on a single chip operating from a 5V supply. It is housed in a 14-pin 0.300-inch plastic DIP package for reliable through-hole PCB assembly and breadboard prototyping. Available in stock worldwide with fast global shipping.
8-Channel Single ADC SAR 140ksps 12-bit Serial Automotive T/R
Operational Amplifiers - Op Amps Wide-Input-Vltg Quad Op Amp R-To-R Output
Transimpedance Amplifiers 1.1-GHz unity-gain bandwidth, 0.9 nV/vHz, bipolar input amplifier
The SN74CBTD3384PWLE is a 5-bit TTL-compatible unidirectional bus switch from Texas Instruments in a 24-pin TSSOP package. It features active-low enable control with 50 pF load capacitance support for high-speed bus switching. Available from stock worldwide with competitive pricing.
DRV8428 Stepper Driver With Integrated Current Sense 1 256 Micro stepping STEP Interface and smart tune Technology
Digital to Analog Converters - DAC 16B 1.0 GSPS 2x-4x Interpolating DAC
DRV8428EPWPR
Battery Management Automotive SPI/UART communication interface functional-safety compliant with automatic host wakeup
Gate Drivers
Operational Amplifiers - Op Amps 1.2V Ultra-low voltage, 350kHz-power saving dual op amp for cost-optimized, battery powered systems
Use the download button to access the TLV9042IPWR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TLV9042IDSGR schematic symbol, PCB footprint, and 3D model.
The TLV9042IDR is a dual-channel general-purpose operational amplifier from Texas Instruments with rail-to-rail input and output. It features ultra-low input bias current of 12 fA max, 89 dB typical CMRR, and 75 dB minimum CMRR for precision signal conditioning. Available in SOIC-8 package, RoHS compliant, in stock with worldwide shipping.
Current Sense Amplifiers AEC-Q100 -4-V to 110-V, 1.3MHz, ultra-precise current-sense amplifier
Use the download button to access the LM393LVDR schematic symbol, PCB footprint, and 3D model.
Texas Instruments TLV9042IDDFR is a dual micropower operational amplifier with rail-to-rail input and output, operating from ±2.75V or 5.5V single supply. Features voltage-feedback architecture with 89dB nominal CMRR, 75dB minimum CMRR, and ultra-low 12pA maximum bias current for precision low-power signal conditioning. Available in 8-pin SOT-23 package with RoHS-compliant construction. In stock worldwide with fast shipping.
INA293B2QDBVRQ1
INA293B4QDBVRQ1
Use the download button to access the TLV9022DR schematic symbol, PCB footprint, and 3D model.
INA293B5QDBVRQ1
INA293A2QDBVRQ1
INA293A4QDBVRQ1
Current Sense Amplifiers AEC-Q100 -4-V to 110-V, 1.3MHz, ultra-precise current-sense amplifier
Current Sense Amplifiers AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package
Operational Amplifiers - Op Amps Quad-channel, cost-optimized, high-speed, standard op amp
INA293A3QDBVRQ1
Use the download button to access the TL084HIDR schematic symbol, PCB footprint, and 3D model.
AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package
Quad nanopower, small size comparator with open-drain output
Current Sense Amplifiers AEC-Q100 -4-V to 110-V, 1.3MHz, ultra-precise current-sense amplifier
Use the download button to access the TLV3604DCKR schematic symbol, PCB footprint, and 3D model.
AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package
Operational Amplifiers - Op Amps Dual, 5.5-MHz, high slew rate, low-noise, low-power, RRO precision JFET operational amplifier
Use the download button to access the INA849DR schematic symbol, PCB footprint, and 3D model.
AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package
AEC-Q100, 2.7-V to 120-V, 1.1-Mhz current sense amplifier in small (SC-70) package
Texas Instruments Ultra-high precision, zero-drift, low-input-bias-current op amp
Use the download button to access the TLV9354IDR schematic symbol, PCB footprint, and 3D model.
Texas Instruments 16-V, quad 4.5-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp
The TPS2377DRG4 is an IEEE 802.3af-compliant Power over Ethernet (PoE) powered device controller IC in an 8-pin SOP package. It manages power extraction from Ethernet cables for PoE-powered equipment with single-channel control. Available from Texas Instruments with worldwide shipping.
High-performance quad low-voltage open-drain comparator
DAC61402RHBR
Use the download button to access the TPS61288RQQR schematic symbol, PCB footprint, and 3D model.
Texas Instruments INA2290 120-V common-mode, ultra-precise current sense amplifier evaluation module
Low-voltage commodity comparator
USB Interface IC Dock management controller 96-NFBGA -10 to 85
DAC81404RHBT
DAC53401DSGRQ1
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote