Texas Instruments

The TLC2201MJGB is a precision operational amplifier from Texas Instruments featuring ultra-low offset voltage and rail-to-rail output swing. It offers 90 dB CMRR, 0.0005 µA max bias current, and operates in a ceramic DIP package. Available from stock with worldwide shipping.

The TL7705BQDR is a single-channel voltage supervisor and reset IC with an adjustable threshold and integrated power-on reset generator. It monitors supply rails in microcontroller and digital systems, asserting reset during brown-out conditions. Available in an 8-pin SOIC package with worldwide shipping.

The 5962-9962001VPA is a radiation-hardness-assured (RHA) adjustable shunt voltage reference with 0.4% accuracy and a 2.4 V to 36 V adjustment range. It supports up to 100 mA output current in a ceramic DIP-8 package for space and military applications. Available from Texas Instruments with worldwide in-stock shipping.

The TLC193MJGB is a dual micropower LinCMOS comparator with two independent comparator functions in a ceramic DIP-8 package. It features ultra-low bias current of 0.03 µA max and 5000 µV input offset voltage. Available from Texas Instruments with worldwide in-stock shipping.

The TL1451ACPWR/5 is a dual-channel PWM controller operating from 3.6 V to 50 V, designed for power supply and DC-DC converter control applications requiring wide input voltage range. It integrates two independent control channels in a small-outline package. Available in stock with worldwide shipping.

The 5962-9555101NXDR is a dual micropower LinCMOS comparator from Texas Instruments with open-drain outputs and ultra-low bias current. It provides two independent comparator channels, 5000 µV max input offset voltage, and 0.03 µA max bias current in an SO-8 package. Available from stock with worldwide shipping.

The TLC0832IDR is an 8-bit, 22 kSPS successive-approximation ADC with serial output, 2-channel multiplexed input supporting single-ended or differential modes, and up to 5.5 V analog input. It interfaces directly with microprocessors in an 8-pin SOIC package. Available in stock with worldwide shipping.

The TL5001AMJGB is a voltage-mode PWM controller IC from Texas Instruments with a wide 3.6 V to 40 V input range. It features ±3% reference tolerance, operates from -55°C to 125°C, and is housed in a ceramic DIP-8 package for harsh environments. Available from stock with worldwide shipping.

The TL7702AIP-P2 is a single-channel voltage supervisor IC from Texas Instruments with programmable undervoltage threshold and reset-time delay. It monitors supply voltage levels and generates reset signals to protect microcontrollers and digital systems from brown-out conditions. Available from stock with worldwide shipping.

The TL441AMJB is a logarithmic amplifier IC from Texas Instruments supporting log and antilog amplification functions with 40 MHz nominal bandwidth. It operates with a -6 V nominal negative supply and is housed in a hermetic ceramic glass-sealed DIP-16 package. Available from stock with worldwide shipping.

The TLC070AID is a precision operational amplifier from Texas Instruments featuring voltage-feedback architecture and ultra-low input bias current. It offers 80 dB min CMRR, 0.0007 µA max bias current, and internal frequency compensation in a small outline SMD package. Available from stock with worldwide shipping.

The Texas Instruments TL4050B50IDBZRG4 is a precision micropower two-terminal shunt voltage reference providing a highly accurate 5.0V nominal output within a tight 4.99V to 5.01V tolerance range. It operates as a simple shunt device requiring minimal external components, making it ideal for space-constrained, low-power analog circuit applications. Available in a compact 3-pin SOT-23 surface-mount package with RoHS-compliant, lead-free construction for modern PCB designs.

The TL3474ACPW is a quad high-slew-rate single-supply operational amplifier with voltage-feedback architecture, 65 dB minimum CMRR, and 0.5 µA maximum bias current at 25°C. It features internal frequency compensation for stable closed-loop operation across a wide bandwidth. Available in a small-outline SOIC package with worldwide shipping.

The SN75HVD06P is a half-duplex RS-485/RS-422 line transceiver with one driver and one receiver supporting signaling rates up to 10 Mbps and differential Schmitt-trigger input. It complies with EIA-485-A and TIA-485-A standards for robust multi-drop communication. Available in an 8-pin PDIP package with worldwide shipping.

The TL082BCP-NG is a dual JFET-input operational amplifier with 3 MHz gain-bandwidth, 13 V/µs slew rate, and 3 mV maximum input offset voltage in a ±30 V supply range. Its rail-to-positive-supply input swing enables flexible single-supply designs. Available in an 8-pin PDIP package with worldwide shipping.

The TL081HIDBVR is a JFET-input operational amplifier from Texas Instruments in a compact 5-pin SOT-23 package. It delivers 100 dB min CMRR, 0.005 µA max input bias current, and voltage-feedback architecture for precision signal processing. Available from stock with worldwide shipping.

IC AMP D DUAL/QUAD 20.6W 64HTQFP

Quad, 40-V, 5-MHz, 4-mV offset voltage, 20-V/µs, In to V+ op amp with -40°C to 125°C operation

SOP-16

Dual-channel low input bias current standard op amp

Use the download button to access the TL391BQDBVRQ1 schematic symbol, PCB footprint, and 3D model.

TL1453CPWR

Buffers & Line Drivers Dual port G.Fast and G.mgFast DSL line driver 28-VQFN -40 to 85

Use the download button to access the TL071HIDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TL331BQDBVRQ1 schematic symbol, PCB footprint, and 3D model.

The TL317P is an adjustable positive voltage regulator from Texas Instruments capable of supplying 100 mA over an output voltage range of 1.25 V to 32 V. It features low dropout performance and adjustable output with just two external resistors.

Use the download button to access the TL082HIDR schematic symbol, PCB footprint, and 3D model.

IC DRIVER 2/0 14HTSSOP

Use the download button to access the TL072HIDDFR schematic symbol, PCB footprint, and 3D model.

The TL16C451 and TL16C452 provide single- and dual-channel (respectively) serial interfaces along with a single Centronix-type parallel-port interface. The serial interfaces provide a serial-to-parallel conversion for data received from a peripheral device or modem and a parallel-to-serial conversion for data transmitted by a CPU. The parallel interface provides a bidirectional parallel data port that fully conforms to the requirements for a Centronix-type printer interface. A CPU can read the status of

The THS4061MJGB is a Texas Instruments 180 MHz voltage-feedback operational amplifier with 70 dB minimum CMRR, 3 µA bias current at 25°C, and internal frequency compensation in a ceramic DIP package. It targets high-speed signal processing in military and aerospace environments requiring hermetic packaging. Available from stock with worldwide shipping.

The TL1431MJGB is a precision programmable shunt voltage reference with a 2.495 V typical internal reference and up to 100 mA output sink current. It provides a stable output from 2.475 V to 36 V using two external resistors in a ceramic 8-pin DIP package. Available from stock with worldwide shipping.

Use the download button to access the TL082HIDDFR schematic symbol, PCB footprint, and 3D model.

TL074CNS is a quad JFET-input op-amp with 30 V supply, 3 MHz bandwidth, and 13 V/µs slew rate, featuring input range extending to positive supply rail. Delivers 100 dB typical CMRR and 200 pA typical bias current for precision audio and signal processing. Available from stock worldwide with competitive pricing.

THS4500MDGNREP is a fully differential, low-distortion op-amp by Texas Instruments in an 8-pin SOIC enhanced-plastic package. Key specs: 30 MHz bandwidth, 80 dB CMRR, 4.6 µA bias current, voltage-feedback architecture for ADC driving. From $7.50 in stock worldwide shipping.

Dual, 30-V, 1-MHz, In to V+, JFET-input operational amplifier

Operational Amplifiers - Op Amps Single-channel high-speed standard op amp

The TL072HIDR is a dual-channel JFET-input operational amplifier from Texas Instruments featuring ultra-low input bias current of 120 pA and 80 dB minimum CMRR. Its voltage-feedback architecture with internal frequency compensation suits precision analog signal processing in a standard 8-pin SOIC package. Available in stock worldwide with fast shipping.

Buffer, ReDriver 2 Channel 3Gbps 20-QFN (4x4)

https://www.ti.com/general/docs/suppproductinfo.tsp?distId=10&gotoUrl=https%3A%2F%2Fwww.ti.com%2Flit%2Fgpn%2Fths6042

The TDA2SABRQABCRQ1 is an automotive-grade ADAS SoC from Texas Instruments housed in a 760-ball FBGA package, integrating highly-featured video and vision acceleration engines alongside multi-core processing for safety-critical driving applications. It is AEC-Q100 qualified with a 1.2 V core supply, designed for surround-view cameras, object detection, and sensor fusion in Level 2+ autonomous driving systems.

Enhanced automotive CAN transceiver with silent and 1.8-V I/O support

Use the download button to access the TL071HIDBVR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TCAN1145DRQ1 schematic symbol, PCB footprint, and 3D model.

Half-duplex RS-485 transceiver operating from 3.3V to 5V supplies at up to 500 kbps with automatic direction control. Offers ±8 kV IEC ESD protection and a differential Schmitt-trigger input in an 8-pin SOIC package for robust industrial communications.

Use the download button to access the TCA39306DCUR schematic symbol, PCB footprint, and 3D model.

70-MHz High-Speed Amplifier

IC DRIVER 2/0 14HTSSOP

IC OPAMP DIFF 1 CIRCUIT 8MSOP

SN75HVD05P