TLC5618AMJGB Texas Instruments Integrated Circuit (Ceramic Dual-In-Line Packages) In Stock
TLC5618AMJGB is a dual 12-bit serial-input DAC from Texas Instruments with programmable settling time and simultaneous output update capability. It supports up to 4.6 V analog output voltage with 2.5 µs settling time and 0.0977% maximum linearity error in an 8-pin ceramic DIP package. Available from stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Ceramic Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- TLC5618AMJGB Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -55.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of TLC5618AMJGB?
- Dual 12-bit DAC with simultaneous update capability allows both output channels to change in one serial write, eliminating output glitches in precision calibration systems
- Programmable settling time of 2.5 µs enables high-speed analog output updates at over 100 kHz update rates in waveform generation applications
- Serial SPI interface in an 8-pin ceramic DIP package with 0.0977% maximum linearity error suits precision test and measurement equipment requiring high-reliability packaging
What is TLC5618AMJGB used for?
The TLC5618AMJGB is suited for precision calibration instruments, programmable voltage reference generators, and automated test equipment where dual 12-bit analog outputs must update simultaneously without inter-channel glitches. Its low linearity error of 0.0977% and 2.5 µs settling time enable accurate waveform synthesis and DC bias point control in signal analyzers and process control systems. The ceramic DIP package makes it appropriate for high-reliability military, aerospace, and industrial applications requiring extended temperature range and hermetically sealed component packaging.
What are the specifications of TLC5618AMJGB?
| Pbfree Code | Yes |
| YTEOL | 15 |
| Analog Output Voltage-Max | 4.6V |
| Converter Type | D/A CONVERTER |
| Input Bit Code | BINARY |
| Input Format | SERIAL |
| JESD-30 Code | R-GDIP-T8 |
| JESD-609 Code | e0 |
| Linearity Error-Max (EL) | 0.0977% |
| Number of Bits | 12 |
| Number of Functions | 1 |
| Package Body Material | CERAMIC, GLASS-SEALED |
| Package Equivalence Code | DIP8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Qualification Status | Not Qualified |
| Sample Rate | 0.075MHz |
| Settling Time-Max | 2.5 µs |
| Settling Time-Nom (tstl) | 2.5 µs |
| Supply Current-Max | 2.5mA |
| Supply Voltage-Nom | 5V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | MILITARY |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| ## TLC5618AMJGB Alternates Showing results | Image |
| Package | Ceramic Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | 3A001.A.2.C |
| HTS Code | 8542.39.00.40 |
Where can I find the TLC5618AMJGB datasheet?
TLC5618AMJGB Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TLC5618AMJGB?
Compatible alternatives and drop-in replacements for TLC5618AMJGB:
Frequently Asked Questions
What is the settling time and output voltage range of the TLC5618AMJGB DAC?
The TLC5618AMJGB achieves a 2.5 µs settling time to within 1 LSB of the final value, with a maximum analog output voltage of 4.6 V. This fast settling enables output update rates exceeding 100 kHz per channel, making it suitable for dynamic analog voltage control in calibration instruments and closed-loop control systems requiring rapid set-point changes.
How does the simultaneous update feature of TLC5618AMJGB benefit a dual-channel calibration system?
The TLC5618AMJGB supports simultaneous update of both DAC output channels from a single serial write cycle, ensuring both analog outputs transition at exactly the same moment within a single clock edge. This eliminates timing skew between channels, which is critical in differential signal generation, balanced audio calibration, and I/Q baseband signal synthesis requiring phase-matched dual outputs with 12-bit, 0.0977% linearity accuracy.
What serial interface protocol does TLC5618AMJGB use and how does it connect to a DSP or microcontroller?
The TLC5618AMJGB uses a 3-wire SPI-compatible serial interface accepting 16-bit serial words at clock rates up to 20 MHz, with separate chip select, clock, and data input pins. It connects directly to the SPI peripheral of most 3.3 V or 5 V microcontrollers and DSPs, requiring only 3 GPIO lines plus a supply bypass capacitor of 100 nF to complete the interface circuit.
When is TLC5618AMJGB preferred over a 16-bit DAC for a voltage reference trimming application?
The TLC5618AMJGB is preferred when 12-bit resolution of approximately 1 mV per LSB at 4.096 V full scale is sufficient for trim accuracy, as the lower bit depth reduces SPI transfer time and simplifies software. For voltage reference trimming where total error budget exceeds ±2 mV, 12-bit resolution avoids the higher cost, longer settling time, and increased noise floor associated with 16-bit DAC devices, while the dual-channel simultaneous update satisfies multi-rail trim requirements in a single 8-pin package.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit