Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,429
Total Products
125
Categories
All Texas Instruments Components
Showing 3,551–3,600 of 41,429
LinCMOS™ Dual Low-Voltage Differential Comparator
Operational Amplifiers - Op Amps Dual LinCMOS Lo-Vltg High-Speed
EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS
Amplifier, Comparator IC Filter 8-PDIP
10-Bit 85 kSPS ADC Ser. Out, Pgrmable Pwr/Pwrdn/Conversion Rate, TMS320 DSP/SPI/QPSI Compat., 4 Ch.
The TLE2144AMJB is a precision quad operational amplifier from Texas Instruments featuring 85 dB minimum CMRR and 1.5 µA maximum bias current in a 14-pin ceramic DIP package. It operates over an extended -55°C to +125°C temperature range with high-speed and high-drive capability. Available from stock with competitive pricing and worldwide shipping.
The TLV2264AMJB is a quad low-power CMOS operational amplifier from Texas Instruments with an ultra-low input bias current of 0.06 pA and a common-mode rejection ratio of 83 dB typical. Key specs: rail-to-rail output, 70 dB minimum CMRR, ceramic DIP-14 package. Available from stock with worldwide shipping.
Texas Instruments SN74LVC2G86DCU3 is a dual 2-input XOR gate in CMOS LVC technology housed in a compact 8-pin VSSOP package. It operates from 1.65V to 5.5V, offering propagation delays as low as 3.8ns at 3.3V supply. Available from stock worldwide with fast shipping.
CMOS Amplifier 4 Circuit Rail-to-Rail 14-SOIC
Texas Instruments TLV2262AMJGB is a dual rail-to-rail operational amplifier with 70 dB min CMRR and 0.8 nA max bias current in a ceramic DIP package. It features voltage-feedback architecture with frequency compensation for stable single-supply operation. Available from stock worldwide with competitive pricing.
The TLV2252AMJGB is a dual rail-to-rail micropower precision op-amp from Texas Instruments built in advanced LinCMOS technology. It provides 70 dB minimum CMRR, 0.001 µA max bias current, and voltage-feedback architecture. Available in a ceramic DIP package for military-grade reliability.
RS-232 Interface IC
Fault protected dual local interconnect Network (LIN) transceiver with dominant state timeout
The TLV2252MJGB is a dual rail-to-rail micropower op-amp from Texas Instruments in an 8-CDIP ceramic package rated -55°C to 125°C. It features 70 dB CMRR minimum and 0.001 µA bias current for precision low-power designs. Available from stock with worldwide shipping.
IC ADC 8BIT SAR 16TSSOP
Texas Instruments TLV1572CDR is a 10-bit successive approximation ADC with a single analog input channel, 0.8 µs maximum conversion time, and up to 5.5 V input range in an 8-SOIC surface-mount package. Designed for cost-sensitive data acquisition and embedded sensor digitization.
TLIN1022ADRQ1
8 Bit Analog to Digital Converter 2, 3, 4 Input 1 SAR 14-SOIC
IC ADC 8BIT SAR 20SOIC
Use the download button to access the TLIN2029ADRQ1 schematic symbol, PCB footprint, and 3D model.
8 Bit Analog to Digital Converter 1 Input 1 SAR 8-SOIC
Fault protected dual local interconnect Network (LIN) transceiver with dominant state timeout
The TLIN1029ADRQ1 is an automotive-grade single-channel LIN transceiver supporting data rates up to 20 Mbps in an 8-pin SOIC package. It is AEC-Q100 qualified for use in demanding vehicle network applications. Available from stock with worldwide shipping.
VSON
The TLE2161AMJGB is a precision voltage-feedback operational amplifier from Texas Instruments featuring 72 dB minimum CMRR, 60 nA maximum bias current, and internal frequency compensation for closed-loop gains of 5 or greater. It is housed in a ceramic dual-in-line (CDIP) package for high-reliability military and industrial applications.
Texas Instruments TLE2161BMJGB is a military-grade single operational amplifier with 36 V supply, 6.4 MHz gain-bandwidth, and 0.3 mV maximum input offset voltage in a ceramic DIP package. Delivers 90 dB typical CMRR for precision signal conditioning. Available from stock with worldwide shipping.
EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE µPOWER OPERATIONAL AMPLIFIERS
J-FET Amplifier 2 Circuit 8-CDIP
TLE2062AMJG
J-FET Amplifier 1 Circuit 8-SOIC
Texas Instruments TLE2072AMJG is a military-grade dual JFET-input operational amplifier with 38 V supply range and 10 MHz bandwidth. It delivers a 40 V/µs slew rate, 2 mV maximum input offset voltage, and 78 dB minimum CMRR. Supplied in a ceramic DIP package for high-reliability applications with worldwide availability.
TLE2061BMJGB
JG
Operational Amplifiers - Op Amps JFET-Input Low Power High Drive Quad Operational Amplifier 14-CDIP -55 to 125
TLE2071AMJGB
Military-grade, dual, 38-V, 10-MHz, 40-V/μs slew rate, In to V+, JFET-input op amp
TLE2141AMJGB is a High-Speed, High-Drive Precision Operational Amplifier in ceramic DIP package. Features 85 dB minimum CMRR, 1.5 µA max bias current, and voltage-feedback architecture for precision signal processing. Available from stock with worldwide shipping.
TLE2062BMJGB is a dual J-FET input operational amplifier in an 8-pin ceramic DIP package with voltage-feedback architecture. Offers 65 dB minimum CMRR, 30 nA max bias current, and 60 pA offset current for precision signal conditioning. Available from stock worldwide with competitive pricing.
J14
J-FET Amplifier 2 Circuit - 8-SOIC
The TLE2064AMJ is a precision quad operational amplifier by Texas Instruments featuring ultra-low bias current of 60pA maximum at 25 degrees C and 90dB typical CMRR. It is housed in a hermetic ceramic DIP package rated for extended temperature operation. Available from stock with worldwide shipping.
Precision voltage-feedback operational amplifier with 100 dB typical CMRR, 0.07 µA max bias current, and internal frequency compensation, housed in a ceramic J-lead DIP package. Delivers low-noise amplification for industrial and military-grade analogue signal chains. In stock worldwide with fast shipping.
TLE2037AMDG4
TLE2024QDWRG4Q1
TLE2024AQDWRG4Q1 is a quad voltage-feedback operational amplifier from Texas Instruments with 82dB minimum CMRR and 70nA maximum input bias current. It features internal frequency compensation, meets AEC-Q100 automotive qualification, and is packaged in a wide SOIC-20 with Pb-free green construction. Available from stock worldwide with competitive pricing.
IC BUFFER INVERT 3.6V 20SOIC
Supervisory Circuits EP MicroPwr Supply Vltg Supervisor
TLE2027MJG is a precision voltage-feedback operational amplifier with 131 dB typical CMRR and 90 nA maximum bias current in a ceramic DIP package. It features internal frequency compensation and is rated for military temperature range. Available from stock with worldwide shipping.
The TLE2024MDWG4 is a quad voltage-feedback operational amplifier from Texas Instruments in a Small Outline package. It features a minimum CMRR of 88 dB, max bias current of 90 nA, and input offset current of 6 nA for precision analog signal processing. Available in stock worldwide in RoHS-compliant Pb-free packaging.
TLE2027AMJG is a precision voltage-feedback operational amplifier from Texas Instruments featuring 131 dB typical CMRR and 0.09 µA bias current in a ceramic DIP-8 package. It is internally frequency-compensated and suited for high-precision instrumentation and signal conditioning. Available from stock with worldwide shipping.
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote