Texas Instruments

Clock Generators & Support Products Ultra-low power clock generator with one PLL, four differential output 24-VQFN -40 to 85

TLV1117CKTTR is a low-dropout linear voltage regulator delivering up to 0.8A output current with adjustable output from 1.25V to 13.7V. Features a low 1.2V typical dropout voltage and 2.7V to 15V input range. Available from Texas Instruments in a 4-pin DDPAK surface-mount package with worldwide shipping.

Board Mount Hall Effect/Magnetic Sensors Auto Analog-Bipolar Hall Effect Sensor

Three-phase sensorless brushless DC motor controller with integrated gate drivers and 180-degree sinusoidal commutation. Supports motor supply voltages from 1.5 V to 7 V. From $0.89 in stock worldwide shipping.

TEXAS INSTRUMENTS - TLV1117CKVURG3 - LDO Voltage Regulator, Adjustable, 2.7V to 15V in, 1.2V drop, 1.25V to 13.7V/0.8A out, TO-252-3

TPS61061DRBR is a single-channel LED boost driver IC from Texas Instruments with a 19 V output, 400 mA switch current, and 1 MHz switching frequency. It delivers efficient LED backlight or string drive in a compact 8-pin SON package. Available from authorized distributors with worldwide shipping.

1-ch, 3-input 1.65-V to 5.5-V 32 mA drive strength AND gate

Motor / Motion / Ignition Controllers & Drivers Automotive 40-V max, 8-A peak, sensored trapezoidal control 3-phase BLDC motor driver

TPS25974LRPWR is a single-channel eFUSE protection IC from Texas Instruments supporting 2.7 V to 23 V input with adjustable overcurrent threshold. It integrates overvoltage, undervoltage, and reverse-current protection in a compact 10-pin QFN package. Available from stock worldwide with competitive pricing.

RF Microcontrollers - MCU SimpleLink Arm Cortex -M4F multiprotocol 2.4-GHz wireless MCU, 704-kB Flash, integrated power amp

Use the download button to access the LMR51430XFDDCR schematic symbol, PCB footprint, and 3D model.

Multiphase Motor Driver NMOS SPI 40-VQFN (7x5)

The TPS79928YZUR is a fixed 2.8 V low-dropout linear regulator delivering 200 mA output current with only 100 mV nominal dropout voltage in a compact 5-pin DSBGA package. It operates from a 2.975 V to 6.5 V input supply with CMOS logic-compatible enable control and features low quiescent current for battery-powered designs. Available in tape-and-reel packaging for automated assembly, it is RoHS-compliant and supports worldwide shipping.

Texas Instruments THVD1426DRLR is a 3.3V to 5V, 12-Mbps half-duplex RS-485/RS-422 transceiver with automatic direction control and plus-minus 12-kV IEC ESD protection. Features differential Schmitt-trigger inputs and a compact SOT-23 flat-lead package. Available from stock with worldwide shipping.

Use the download button to access the DRV8251ADDAR schematic symbol, PCB footprint, and 3D model.

TMS28F400AEB80CDBJL is a 4 Mbit (256K x 16 or 512K x 8) auto-select boot-block Flash memory from Texas Instruments. Features 80 ns access time, bottom boot block architecture, 100,000 write/erase cycles endurance, and 5 V operation. Available in 44-pin TSOP package with worldwide shipping.

TMP114BIYMTR is a high-accuracy 16-bit digital temperature sensor with ±0.2°C max accuracy and a 2-wire I2C interface, housed in a 0.758 mm × 0.758 mm WCSP package for space-constrained designs. Operating current is only 1.5 µA max for energy-efficient applications. Available in stock worldwide with fast global shipping.

Use the download button to access the BQ27Z746YAHR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the OPA182IDR schematic symbol, PCB footprint, and 3D model.

Texas Instruments PDRV8244HRYJQ1 is an AEC-Q100-qualified automotive gate driver IC rated from -40°C to +125°C for reliable motor and power-stage control. It provides high-current gate drive outputs suited for multi-phase brushless DC motor inverters in automotive powertrains. Available in stock worldwide with competitive lead times.

Switching Voltage Regulators Automotive 3.8-V to 36-V, 3-A synchronous step-down voltage converter 12-VQFN-HR -40 to 125

The TPS62932DRLR is a current-mode synchronous buck converter from Texas Instruments, accepting 3.8 V to 30 V input and using pulse-width modulation control for efficient step-down conversion in a compact 8-pin WSON package. It targets space-constrained industrial and telecom power supplies. Available in stock worldwide with competitive pricing and fast shipping.

Texas Instruments INA241A1 is a current-sense amplifier in SOT-23 package with a wide common-mode voltage range of −4 V to +110 V. It features a fixed gain of 20 V/V and operates from a 2.7 V to 5.5 V supply, delivering accurate bidirectional current measurements. Available from stock with worldwide shipping.

The LM4863LQ/NOPB is a dual-channel audio power amplifier from Texas Instruments delivering 2.7 W per channel with a 20 kHz bandwidth and 98 dB signal-to-noise ratio. It operates from a single supply for bridge-tied load or stereo single-ended speaker configurations, housed in a 24-pin QFN package. Designed for portable consumer electronics requiring compact, high-quality stereo amplification.

Texas Instruments BQ76PL455A-Q1 is an automotive-grade 16-cell battery monitor and protector IC in a QFP package. Monitors cell voltages and temperatures with 16-bit ADC resolution, supports daisy-chain communication up to 16 devices for large EV battery packs. Available in stock with worldwide shipping.

Shunt Voltage Reference IC Fixed 10V V ±0.1% 15 mA TO-92-3

TPS7A4433DGQR is a fixed 3.3 V low-dropout linear regulator from Texas Instruments supporting input voltages up to 65 V and a maximum output current of 50 mA. It features ultra-low dropout voltage of 0.6 V typical and operates across a wide input range ideal for industrial and automotive power rails. Available in a 10-pin MSOP-PowerPAD package with excellent PSRR for noise-sensitive designs. From competitive pricing in stock worldwide shipping.

Motor / Motion / Ignition Controllers & Drivers 40-V max, 8-A peak, sensorless trapezoidal control 3-phase BLDC motor driver

Motor / Motion / Ignition Controllers & Drivers Automotive 12-V battery, sensorless sinusoidal control 3-phase BLDC motor driver 24-HTSSOP -40 to 125

Power Switch ICs - Power Distribution 5.5-V, 6-A, 8.7-mΩ load switch with adjustable rise time and adjustable quick output discha 8-WQFN-HR -40 to 125

Single-channel eFUSE power protection IC with 4.5 V to 58 V input range, adjustable current limit threshold, and fault management in a 20-pin HTSSOP package. Provides overcurrent, overvoltage, and thermal protection for industrial and telecom power rails. Available in stock worldwide with fast global shipping.

Texas Instruments TLV9351QDBVRQ1 is an AEC-Q100 automotive single-channel op amp with 3.5 MHz bandwidth, 40 V supply range, and rail-to-rail output swing in a 5-pin SOT-23 package. Offers 95 dB CMRR and MUX-friendly input architecture for precision signal conditioning. Available from stock with worldwide shipping.

TLV7042QDGKRQ1 is a dual automotive-grade analog comparator with open-drain output, 2-nA typical bias current, 8 mV maximum input offset voltage, and AEC-Q100 qualification in an 8-pin VSSOP package. Available from stock worldwide with fast shipping.

32-bit Microcontrollers - MCU C2000 32-bit MCU 120-MHz 384-KB flash, FPU, TMU with CLA, CLB, AES and CAN-FD 80-LQFP -40 to 125

Operational Amplifiers - Op Amps Quad, 5.5-V, 1-MHz, 4-mV offset voltage, RRO operational amplifier 14-SOT-23-THIN -40 to 125

Use the download button to access the F280039CSPZ schematic symbol, PCB footprint, and 3D model.

Battery Management Single Cell Li-Ion Charger

Buffers & Line Drivers Octal buffers and line drivers with 3-state outputs and Schmitt trigger inputs 20-VQFN -40 to 125

Monostable Multivibrator 13 ns 16-VQFN (4x3.5)

Fuel Gauge Li-Ion/Li-Pol 12-Pin VSON EP T/R

TPSM63606RDLR is a high-density 6 A DC/DC power module from Texas Instruments accepting 3 V to 36 V input and delivering 1 V to 16 V output with current-mode PWM control in a compact 5 mm x 5.5 mm enhanced HotRod QFN package. Integrates inductor and controller for minimal external components. In stock globally with worldwide shipping.

TPS929121AQPWPRQ1 is an AEC-Q100-qualified automotive 12-channel high-side LED driver from Texas Instruments with a 40 V input voltage rating and FlexWire single-wire diagnostic interface. It supports independent PWM dimming on each of the 12 channels for precise automotive exterior and interior lighting control. Available in a 24-pin HTSSOP package with worldwide shipping.

RF Detector 50 MHz to 4 GHz 40 dB Logarithmic Power Detector for CDMA and WCDMA 6-DSBGA -40 to 85

The TMCS1108A4BQDRQ1 is an AEC-Q100 automotive-grade isolated Hall-effect current sensor from Texas Instruments, offering ±100 V isolation and analog voltage output in a compact 8-pin SOIC package rated from -40 °C to 125 °C. It provides precise, non-intrusive current measurement for automotive and industrial applications. Available in stock worldwide with competitive pricing and fast global shipping.

TL431CLPRE3 is an adjustable precision shunt voltage reference IC with 2.2% initial accuracy and output voltage range from 2.5V to 36V. Operates as a two-terminal programmable zener replacement in 3-pin TO-92 through-hole package. Available from Texas Instruments in stock with worldwide shipping.

Logic Gates Quad 2-Input

THVD1406DRLR is a 3.3 V to 5 V half-duplex RS-485 and RS-422 transceiver IC with auto-direction control and 12 kV IEC 61000-4-2 ESD protection in an 8-pin SOT-23 flat lead package supporting up to 500 kbps data rate. It eliminates DE/RE direction control signals in half-duplex networks, simplifying firmware. Available in stock with worldwide shipping from authorized distributors.

TMS4C1024-80N is a 1 Mbit Fast Page Mode DRAM from Texas Instruments with a maximum access time of 80 ns and a 1-bit wide data bus. It supports RAS-only, CAS-before-RAS, and hidden refresh modes in an 18-pin DIP package. Available in stock worldwide for legacy system maintenance and vintage computer repair.

LFBGA, BGA423,24X24,25

Use the download button to access the BQ24010DRCR schematic symbol, PCB footprint, and 3D model.