Texas Instruments

The LM4915LQX/NOPB is a single-channel mono Class-AB headphone amplifier delivering 0.28 W nominal output power with 20 kHz audio bandwidth in a compact 8-pin WQFN package. It is optimized for portable electronics driving 32-ohm headphone loads from low-voltage supplies. Available from stock worldwide with lead-free RoHS-compliant e3 finish.

TEXAS INSTRUMENTS - DRV5053VAQLPG - Hall Effect Sensor, Bipolar, 2.3 mA, TO-226AA, 3 Pins, 2.5 V, 38 V

Switching Voltage Regulators 1A SD Vtg Reg

Operational Amplifiers - Op Amps Quad, 40-V, 5-MHz, 4-mV offset voltage, 20-V/us, In to V+ op amp with -40 C to 125 C operation

RS-422/RS-485 Interface IC Low emissions, 5-kVrms, 12-Mbps isolated RS-485 transceiver with integrated DC/DC converter

Voltage References 1.235-V, 0 C to 70 C, micropower voltage reference diode 3-TO-92 0 to 70

HD74LS240P is an octal inverting 3-state buffer/line driver from Texas Instruments in a 20-pin DIP package. It features two 4-bit enable inputs and 3-state outputs for bus-driving at TTL logic levels. Available from stock with worldwide shipping.

Use the download button to access the SN74LVC2G07DRYR schematic symbol, PCB footprint, and 3D model.

DS90C031W-QMLV is a quad LVDS line driver from Texas Instruments with 0.45 V differential output swing compliant with IEEE 1596.3 in a 16-pin CFPAK package. Features 4 differential output channels with 10 µA high-level input current and RoHS-compliant construction. Available from stock worldwide with fast shipping.

Switching Voltage Regulators SIMPLE SWITCHER High Efficiency 3A Step-Down Voltage Regulator with Sync 7-DDPAK/TO-263 -40 to 125

Switching Voltage Regulators 3V-65V, 150mA Automotive

Board Mount Hall Effect/Magnetic Sensors Auto Analog-Bipolar Hall Effect Sensor, 2.7V ~ 38V, 20kHz, -40°C ~ 125°C

Use the download button to access the LM2598S-ADJ/NOPB schematic symbol and PCB footprint.

Proximity Sensors

Board Mount Hall Effect / Magnetic Sensors Auto Analog-Bipolar Hall Effect Sensor

Board Mount Hall Effect / Magnetic Sensors 2.5 to 38V Analog Bipol Hall Eff Snsr

LM2678SX-12/NOPB is a 5 A step-down switching regulator from Texas Instruments with a fixed 12 V output and an 8 V to 40 V input range. It operates in voltage-mode PWM control and integrates an internal power switch for simplified designs. From $3.20, in stock, worldwide shipping.

TPS54020RUWT is a synchronous current-mode PWM step-down DC-DC converter from Texas Instruments accepting 4.5 V to 17 V input and delivering up to 10 A at adjustable outputs from 0.6 V to 5 V. Integrated high- and low-side MOSFETs eliminate external switches and reduce BOM for high-density point-of-load designs. The device is housed in a compact 15-pin VQFN package with exposed pad for efficient thermal dissipation. From competitive pricing in stock worldwide shipping.

Proximity Sensors 4-channel inductance-to-digital converter for low-power proximity and touch-button sensing

SN74LV393A-Q1 is an automotive-grade dual 4-bit binary counter IC from Texas Instruments. It operates from a 1.65 V to 5.5 V supply, supports clock frequencies up to 100 MHz, and is AEC-Q100 qualified for automotive use. Available from stock worldwide with competitive pricing.

Hall Effect Sensor Single Axis TO-92-3, 2.7V ~ 38V, -40°C ~ 150°

USB Interface IC USB Type-C® and USB PD controller with integrated power switches for USB4 devices 56-VQFN -10 to 75

Motor / Motion / Ignition Controllers & Drivers 40-V max, 8-A peak, sensored trapezoidal control 3-phase BLDC motor driver

Use the download button to access the SN74HCS157QWBQBRQ1 schematic symbol, PCB footprint, and 3D model.

Motor Drives 33V H bridge motor driver with current regulation and current sense feedback

Digital Isolators Automotive, general-purpose, quad-channel, 4/0 digital isolator

Isolation Amplifiers Automotive 2-V-input reinforced isolated amplifier with high CMTI for current sensing

Buffers & Line Drivers Schmitt-trigger inputs quadruple bus buffer gates with 3-state outputs

Board Mount Hall Effect / Magnetic Sensors 2.5 to 38 V 3-TO-92 -40 to 125

Digital Isolators Low-emissions, low-ripple, quad-channel, 2/2, reinforced digital isolator with integrated power

Use the download button to access the LM66100QDCKRQ1 schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps 300 mA High Speed Buffer with Adjustable Current Limit 7-DDPAK/TO-263 -40 to 125

LED Lighting Drivers 2 18 LED matrix driver with 8-bit analog and 8-/16-bit PWM dimming

Analog to Digital Converters - ADC Automotive 16-bit, 32-kSPS, four-channel, simultaneous-sampling, delta-sigma ADC

Texas Instruments TLV9032PWR is a dual-channel precision comparator with push-pull output, 1.5 mV maximum input offset voltage, and 5 nA maximum bias current in an 8-pin SOIC package. It operates from a single 1.8 V to 5.5 V supply with rail-to-rail input range for accurate threshold detection. Available from stock with worldwide shipping.

LM336-2.5 2.5-V Integrated Reference Circuit

TPS82672SIPR is a high-efficiency step-down DC-DC converter from Texas Instruments operating at 5.5 MHz with 2.3 V to 4.8 V input range in a compact BGA-8 package. It achieves up to 90% efficiency using pulse-width modulation and pulse-frequency modulation control. Available from stock with worldwide shipping.

-40°C ~ 125°C Battery Battery Monitor IC Lithium Ion 64-HTQFP (10x10)

Low-emissions, low-ripple, quad-channel, 0/4, reinforced digital isolator with integrated power

TPD1E10B06DYARQ1 is an automotive-grade single-channel ESD protection diode with plus/minus 30 kV ESD immunity and 12 pF capacitance in a 0402 package. Clamps transients to 10 V maximum with 90 W peak pulse power dissipation. Available from stock worldwide at competitive prices for automotive and industrial designs.

Digital Isolators Low-emissions, low-ripple, quad-channel, 0/4, reinforced digital isolator with integrated power

TLV9032QDGKRQ1 is an automotive-grade dual push-pull comparator operating from 1.65 V to 5.5 V supply with ±1500 µV max input offset voltage and 5 nA max bias current. Available in VSSOP-8 package for compact PCB designs. In stock worldwide with competitive pricing.

PLASTIC, DIP-8

The LMR54406 is a SIMPLE SWITCHER synchronous buck converter from Texas Instruments, supporting 4.5 V to 36 V input and delivering up to 0.6 A output current with an ultra-low 80-µA quiescent current. It integrates high-side and low-side MOSFETs for high efficiency in space-constrained designs. Available in stock worldwide with competitive pricing and fast shipping.

TMP127EDBVRQ1 is an automotive-grade 14-bit digital temperature sensor from Texas Instruments with SPI interface. It features ±0.8°C maximum accuracy over a -55°C to 150°C range. Available in a compact SOT-23 6-pin package, AEC-Q100 qualified, from $1.20 in stock worldwide shipping.

TMP421YZDT is a dual-channel remote and local temperature sensor IC with 12-bit resolution and 2-wire interface. Offers up to ±2.5°C accuracy across a -40°C to +125°C operating range. Available from Texas Instruments in compact DSBGA package with worldwide shipping.

REF2033QDDCRQ1 is a precision 3.3 V voltage reference IC from Texas Instruments in a compact SOT-23-5 package. It supports input voltages from 2.52 V to 5.5 V and delivers up to 20 mA output current with low dropout. Available from stock with worldwide shipping.

TEXAS INSTRUMENTS - LMZ14201EXTTZ/NOPB - DC/DC POL Converter, Adjustable, Buck & Synchronous Buck, 1 MHz, 800 mV to 6 V out, 1 A, TO-PMOD-7

TLV9164IPWR is a quad rail-to-rail output op-amp from Texas Instruments with 1 MHz bandwidth, 75 dB CMRR, and 1000 µV max input offset voltage. Available in a compact SOIC-14 package with industrial temperature range support. In stock globally with worldwide shipping.

Clock Generators & Support Products Ultra-low power clock generator with one PLL, four differential output 24-VQFN -40 to 85