Texas Instruments

Digital Isolators Low-emissions, low-ripple, quad-channel, 3/1, reinforced digital isolator with integrated power

200 mA nanopower LDO voltage regulator with only 200 nA quiescent current and an enable pin for power-gating. Fixed 0.9 V output operates from 1.5 V to 6 V input across -40°C to +125°C in a 5-pin SOT-23 package. From $0.38 in stock worldwide shipping.

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.2-V to 80-V, 2-A, synchronous buck with 40-uA IQ

Texas Instruments TCA39306DCURQ1 is an automotive-grade 2-bit bidirectional I2C and SMBus voltage level translator in an 8-pin VSSOP package, rated from -40°C to 125°C. It supports FM+ I2C bus speeds up to 1 MHz and enables communication between 1.0 V and 5.5 V voltage domains. In stock with worldwide shipping.

Motor / Motion / Ignition Controllers & Drivers 35-V, 2.5-A bipolar stepper driver with integrated current sensing & 1/256 microstepping 28-HTSSOP -40 to 125

TL720M05QKTTRQ1 is a fixed 5 V automotive-grade low-dropout linear voltage regulator from Texas Instruments in a TO-263 3-pin package. It accepts input voltages from 5.5 V to 42 V with a maximum dropout of 0.5 V and meets AEC-Q100 qualification for automotive applications. Available from stock worldwide with fast shipping.

Use the download button to access the LM137H/NOPB schematic symbol and PCB footprint.

TMCS1107A1BQDT is a galvanically isolated Hall-effect current sensor from Texas Instruments with 420 V reinforced isolation and internal reference. It provides an analog voltage output proportional to current, operates from -40°C to +85°C, and fits an 8-pin SOIC package. Available from stock with worldwide shipping.

TMUX7462FRRPR is a 4-channel fault-protected analog switch with ±60 V fault protection, latch-up immunity, and 1.8 V logic compatibility. Key specs include 500 MHz bandwidth, -5 V to -22 V negative supply range, and adjustable fault threshold. In stock worldwide with fast shipping in a 16-pin QFN package.

Analog to Digital Converters - ADC Eight-channel, 800-kSPS, 16-bit SAR analog-to-digital converter (ADC) with GPIOs and SPI 16-DSBGA -40 to 125

IC REG LINEAR 5V 500MA TO252-3

Battery Management 3-series to 7-series cell Li-ion battery, internal delay timer, voltage and temperature protector

Texas Instruments LM2575HVT-ADJEP is a SIMPLE SWITCHER 1A adjustable step-down voltage regulator in TO-220-5 package, accepting inputs up to 60 V with pulse-width modulation voltage-mode control. Available from stock with worldwide shipping.

Clock Buffer Dual bank 4-channel output 1.8-V, 2.5-V, and 3.3-V LVDS buffer

Switching Voltage Regulators 1A STEP-DOWN VLTG REG

Operational Amplifiers - Op Amps 40-V, single 10-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp 6-SOT-23 -40 to 125

PDRV8243HRXYQ1 is an AEC-Q100 qualified automotive H-bridge motor driver with integrated current sense and diagnostic reporting, designed for 12 V automotive systems. It delivers up to 3 A continuous output current with overcurrent, thermal shutdown, and fault reporting diagnostics. Available from stock with worldwide shipping.

SNJ54LS181J is a 4-bit arithmetic logic unit from Texas Instruments capable of 16 logic and arithmetic operations in a military-grade 24-pin CDIP package. Features internal carry and higher-order lookahead with 15 pF load capacitance. Available from stock worldwide with fast shipping.

12 Bit Digital to Analog Converter 1 6-WSON (2.2x2.5)

TLV3603DCKR is a 2.5 ns ultra-fast rail-to-rail comparator from Texas Instruments in a 6-pin SOT-23 package. It features push-pull output, adjustable hysteresis, and a latch function with 5 µA bias current and 5 mV offset voltage. Available from stock worldwide with competitive pricing.

Trans GP BJT NPN 35V 0.02A 6-Pin TO-99 Box

TMCS1107A2UQDT is a 420 V isolated Hall-effect current sensor IC in an 8-pin SOIC package, operating from -40°C to 85°C. It features galvanic isolation with an internal voltage reference and analog voltage output proportional to measured current. Suitable for motor drives, power inverters, and high-voltage industrial current monitoring applications.

The TPS54227DRCT is a 2 A synchronous step-down DC-DC converter accepting 4.5 V to 18 V input and delivering an adjustable 0.76 V to 7 V output. It integrates pulse-width modulation control with voltage-mode feedback in a compact SON-10 package, enabling high-efficiency point-of-load regulation. Available from stock worldwide with competitive pricing.

Current Sense Amplifiers 40-V, bidirectional, high-precision current sense amplifier with picoamp input bias & ENABLE 6-DSBGA -40 to 125

Texas Instruments TDP0604IRNQR is a 4-channel DisplayPort++ HDMI 2.0 redriver IC supporting up to 6 Gbps per lane in a 40-pin QFN package. It restores signal integrity on high-speed display links for consumer electronics and docking station designs.

TMAG5170A2EDGKRQ1 is an AEC-Q100 Grade 1 automotive linear 3D Hall-effect magnetic sensor with 12-bit resolution and SPI interface, operating from 2.3 V to 3.6 V supply over -40°C to +150°C temperature range. Designed for precise angle, position, and rotation sensing in automotive and industrial applications.

Texas Instruments TPS6286820CRQYR is an automotive-qualified synchronous buck converter delivering 4A output current from a 2.4V to 5.5V input with adjustable output down to 0.8V. It combines PWM and PFM control modes for high efficiency across load ranges in a 9-ball PowerVFQFN package. Available from stock with worldwide shipping.

Logic Gates Quad Positive-NAND Gate

Motor / Motion / Ignition Controllers & Drivers 40-V max, 8-A peak, sensorless FOC control 3-phase BLDC motor driver

Texas Instruments XDRA821UXXGALM is a high-speed integrated circuit in a 433-ball FCBGA package operating at 2000 MHz with supply voltage range of 0.76 V to 0.84 V, designed for high-performance digital processing applications requiring fine-pitch BGA assembly.

SOIC-20

The PTPS7A9401DSCR is a 1A ultra-low noise, ultra-high PSRR adjustable RF LDO voltage regulator from Texas Instruments with input voltage range of 1.7V to 5.7V and typical dropout of 150mV. Packaged in a 10-pin PDSO for RF and wireless applications. Available from stock worldwide with fast shipping.

Board Mount Hall Effect / Magnetic Sensors Linear hall effect sensor with digital PWM output 3-TO-92 -40 to 125

TPS6285021HQDRLRQ1 is an automotive-grade current-mode PWM/PFM buck switching regulator by Texas Instruments in an 8-pin flat-lead package. It operates from 2.7 V to 6 V input with 5 V nominal, featuring automatic PWM/PFM mode switching for high efficiency across light and heavy loads. Designed for automotive infotainment, ADAS sensor rails, and battery-powered embedded systems.

Current & Power Monitors & Regulators 28-V, 12-bit, I C output current/voltage/power monitor with alert in WCSP 8-DSBGA -40 to 125

The TPS2103DBVRG4 is a single-channel source-select OR controller and load switch from Texas Instruments. It provides automatic power-path management with a controlled turn-on slew rate, 2.7 V to 5.5 V input range, and 500 mA continuous output current in a SOT-23-5 package. RoHS-compliant, available from stock with worldwide shipping.

Texas Instruments UC385T-2 is a high-current fixed positive linear voltage regulator capable of delivering 5A output current with an ultra-low dropout voltage of 0.35V nominal. It accepts input voltages from 1.7V to 7.5V, making it ideal for low-headroom power supply designs. Available from stock worldwide with fast shipping.

TMP114NBIYMTR is a high-accuracy 16-bit digital temperature sensor in a tiny 0.76 mm BGA package, with ±1°C maximum accuracy and I2C/SMBus 2-wire interface. It draws only 1.5 µA operating current and supports programmable alert thresholds for temperature monitoring applications. Suited for wearables, IoT nodes, and space-constrained portable devices requiring precise thermal monitoring.

The TPS25970LRPWR is a single-channel eFuse IC with a 2.7 V to 23 V input range, 10 mΩ integrated FET, and 7 A continuous current capability featuring fast overvoltage and overcurrent protection with adjustable thresholds. It replaces discrete hot-swap controller circuits in a compact 10-pin QFN package for space-constrained power protection designs. Available from global distributors with worldwide shipping.

Low-Voltage, High-Speed Quadruple Differential Line Receiver

SOIC-20

Logic Gates 4-ch, 2-input, 2-V to 6-V low power AND gates with Schmitt-Trigger inputs 14-WQFN -40 to 125

Use the download button to access the LM4952TSX/NOPB schematic symbol and PCB footprint.

Texas Instruments TLV7103318DSET is a dual-output, 200 mA fixed 1.8 V LDO regulator with low noise and high PSRR in a 6-pin SOT-23 package. Accepts 2 V to 5.5 V input and delivers 150 mV typical dropout at full load. Available in stock worldwide with fast shipping.

SON-12

RS-422/RS-485 Interface IC

Operational Amplifiers - Op Amps Dual, 40-V, 10-MHz, low-power operational amplifier

Texas Instruments TLV3801DSGT is a single high-speed analog comparator with a 5000 µV maximum input offset voltage and 10 µA bias current. It features a fast propagation delay suitable for threshold detection and signal conditioning. Supplied in an 8-pin SON package with RoHS e3 rating and worldwide availability.

Precision Amplifiers Ultra-high precision (2 V), zero-drift (0.003 V/C), low-input-bias-current op amp (quad) 14-TSSOP -40 to 125

TCA9537DGSR is a 4-bit I2C-bus and SMBus I/O expander with interrupt output, featuring 400 kHz fast-mode I2C, configurable I/O direction per pin, and active-low interrupt. Designed for low-voltage 1.65 V to 5.5 V systems in VSSOP-10 package targeting embedded control and industrial automation.