Texas Instruments

BUFF/DVR 3-ST OCT 20SSOP

Buffers & Line Drivers Dual Differential Line Receiver 16-CDIP -55 to 125

The SN74ALS564BNS is an octal D-type edge-triggered flip-flop with 3-state outputs from the ALS logic family, featuring buffered clock and output enable control inputs. It supports high-speed 8-bit data latching with output enable in a Small Outline package. Available from stock with worldwide shipping.

The SN74ALS573CNS is an octal D-type transparent latch with 3-state outputs from Texas Instruments, designed to drive bus lines directly. It belongs to the ALS (Advanced Low-power Schottky) logic family, offering high speed and low power for bus interface applications. Available in stock with worldwide shipping.

NAND Gate 1-Element 8-IN Bipolar 14-Pin SSOP Tube

Counter IC Binary Counter 1 Element 4 Bit Positive Edge 20-SOIC

Buffer/Line Driver 8-CH Non-Inverting 3-ST Bipolar 20-Pin SOIC Tube

D-Type Flip-Flops in a Single Package With 3-State Bus Driving True Output

These 8-bit D-type transparent latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

Flip Flop 1 Element D-Type 9 Bit Positive Edge 24-SOIC (0.295", 7.50mm Width)

Buffers & Line Drivers Tri-State Octal

SN74ALS20ANSR

SN74ALS241CNS is an octal bus buffer and line driver with 3-state outputs from Texas Instruments in a 20-pin SOIC package, operating on 5 V supply with ALS-TTL speed and low power. It features active-low output enable control and non-inverting buffers for driving high-capacitance bus loads. Available from stock with worldwide shipping.

FLIP FLOP D-TYPE BUS INTERFACE P

SN74ALS273NS is an octal D-type flip-flop with clear from Texas Instruments ALS logic family in SOIC-20 package. Features 8 edge-triggered D flip-flops with active-low master reset and TTL-compatible operation. Available from stock worldwide with competitive pricing.

3-State Outputs Interface Directly WithSystem Bus

Multiplexer 1-Element Bipolar 3-ST 8-IN 16-Pin CDIP Tube

The SN74ALS193ANS is a 4-bit synchronous up/down binary counter from Texas Instruments in the Advanced Low-power Schottky (ALS) logic family, featuring separate up and down clock inputs, asynchronous clear, and parallel load capability. It operates from a 5V supply with improved speed and power consumption over standard LS logic, housed in a 16-pin DIP package. Widely available through global distributors with competitive pricing and worldwide shipping.

4-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

Asynchronous FIFO 64 (16 x 4) Uni-Directional 40MHz 30ns 16-SOIC

Texas Instruments SN74AHC1G125DCKR-P is a single-channel tri-state bus buffer with active-low output enable, operating from 2V to 5.5V supply and offering high-speed AHC logic performance. It is designed for signal buffering and bus isolation in mixed-voltage systems. Available in a compact 5-pin SOT-23 package with worldwide shipping.

SN74ALS05ADB

SOP-16

HEX/QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR

SN74ALS00ANS

DIP-16

Logic Gates Military 4-ch, 2-input, 4.5-V to 5.5-V bipolar AND gates with open-collector outputs 14-CDIP -55 to 125

Texas Instruments SNJ54S134J is a military-grade 12-input NAND gate with 3-state outputs, operating from 4.5V to 5.5V in a 16-pin ceramic DIP package for high-reliability applications. Rated for extended temperature ranges in defense and aerospace systems. Available from stock worldwide with fast shipping.

SN74ALS139NS

SN74ALS164ANS

SN74ALS163BNS

IC GATE NAND 3CH 3-INP 14-SO

Use the download button to access the SN74AHCT594NSR schematic symbol, PCB footprint, and 3D model.

Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

SN74AHCT541NSR-P is an octal tri-state buffer and line driver from Texas Instruments AHCT logic family in SOIC-20 package. Features 8 non-inverting buffers with tri-state outputs, TTL-compatible inputs, and 5V CMOS operation. Available from stock worldwide with competitive pricing.

SN74AHCT08NS

The SN74AHCT132PWR-P is a quad 2-input NAND gate with Schmitt-trigger inputs from Texas Instruments, operating on a 5 V supply with TTL-compatible input levels. It provides noise immunity and hysteresis for signal conditioning. Available from stock with worldwide shipping.

SN74AHCT174NSR

Texas Instruments SN74AHCT14PWR-P is a hex Schmitt-trigger inverter in a Small Outline Package operating from 4.5V to 5.5V supply. Provides six independent inverting channels with hysteresis for noise-immune signal conditioning. Available in tape-and-reel packaging with worldwide distribution.

The SN74AHCT273PWR-P is a high-speed 8-bit D-type flip-flop register from Texas Instruments with asynchronous clear and AHCT-family 5V-tolerant inputs. It stores 8 bits of data on the rising clock edge and accepts standard TTL input levels while operating from a 5V supply. Available on tape and reel in a TSSOP-20 package with worldwide shipping.

Buffer, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP

4-ch, 2-input, 4.5-V to 5.5-V NAND gates with TTL-compatible CMOS inputs

The SN74AHC8541PW-P is an 8-bit Schmitt-trigger buffer with selectable inverting or non-inverting outputs and 3-state control in TSSOP package. Operates at 2V to 5.5V with AHC logic for noise-immune signal conditioning. Available from stock with worldwide shipping.

The SN74AHC273PWR-P is an octal D-type flip-flop with clear from Texas Instruments, featuring 8 edge-triggered latches in a 20-pin TSSOP package. It operates from 2V to 5.5V supply with AHC-speed performance for low-power digital logic storage. Available in tape-and-reel stock worldwide with fast shipping.

Texas Instruments SN74AHC1G04DCKR-P is a single inverter gate operating from 2V to 5.5V supply with AHC-family high-speed CMOS logic. Features 5-pin SOT23 package with low propagation delay and wide voltage range. Available from stock with worldwide shipping.

SN74AHC14PWR-M is a hex Schmitt trigger inverter IC from Texas Instruments, providing six independent inverting channels with hysteresis for clean signal conditioning. Operates across a 2V to 5.5V supply range with high-speed AHC logic for noise-immune waveform shaping. Available in SOIC-14 package with worldwide shipping.

TVSOP-20

Flip-Flops Octal Edge-Trig D-Ty F-F W/3-State Otpt

Flip Flop 2 Element D-Type 8 Bit Positive Edge 48-BSSOP (0.295", 7.50mm Width)

The SN74AHC244PWR-P is a non-inverting octal buffer and line driver from Texas Instruments with 3-state outputs, supporting two 4-bit elements in a 20-pin TSSOP package. It features AHC-series high-speed CMOS logic with low power consumption and broad operating voltage range. Available in stock with worldwide shipping.