Texas Instruments

Adjustable precision shunt regulator

Hex Inverters With Open-Drain Outputs

JFET-Input High-Output-Drive uPower Operational Amplifier

Octal Buffers/Drivers With 3-State Outputs

Quadruple D-Type Flip-Flops With Clear

180-MHz High Output Drive Voltage-Feedback Amplifier

Embedded Test-Bus Controllers IEEE STD 1149.1 (JTAG) TAP Masters W/ 8-Bit Generic Host Interfaces

12-Bit Asynchronous Binary Counter

Hex D-Type Flip-Flops With Clear

Dual FET Bus Switch

Octal Buffers/Drivers With 3-State Outputs

Octal Buffers/Drivers With 3-State Outputs

315W-stereo / 600W-mono ultra-HD analog-input automotive class-D amplifier

Remote 8-Bit I2C and Low-Power I/O Expander With Interrupt Output and Configuration Registers

Adjustable precision micropower shunt voltage reference with 0.2% accuracy

XTPS56C230RJET is a 21 pins power management ic by Texas Instruments. Key specs: 21 pins, Quad Flat No-Lead package, 4.5-V to 18-V, 12-A synchronous buck converter. From quote-based sourcing, in stock checks support worldwide shipping.

Use the download button to access the LT1030CD schematic symbol, PCB footprint, and 3D model.

MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller

Quad Differential Comparator, Enhanced Voltage

Micropower Integrated Precision Voltage Reference

16-Bit Buffers/Drivers with 3-State Outputs

The CD74HC368E is a hex inverting tri-state buffer and bus driver in the high-speed CMOS HC family from Texas Instruments. It provides six active-low enabled inverting buffers with 50pF load drive capability in a through-hole 16-pin PDIP package. Available from authorized distributors with worldwide shipping.

Octal Buffers and Line Drivers with 3-State Outputs

Quad D-type flip-flop with synchronous reset, complementary outputs, 24 mA output drive, and 50 pF load capability in the AC logic family, housed in a 16-pin SOIC package. RoHS-compliant and available from stock worldwide with fast shipping.

Low-Voltage High-Speed Quadruple Differential Line Receiver

The PQ25886RGET is a standalone 2-cell boost-mode battery charger from Texas Instruments supporting 2 A charge current from a USB input with adjustable threshold control. It integrates a heat-sink slug in a 24-pin QFN package for efficient thermal management. Available from stock worldwide with fast shipping.

Octal Line Driver/MOS Driver with 3-State Outputs

The CD4502BM96 is a CMOS strobed hex inverter and buffer with three-state outputs from Texas Instruments in the 4000-series logic family. It features active-low enable control, common inhibit for all 6 channels, and 50 pF load capacitance in a 16-pin SOIC package. Available with worldwide shipping.

Voltage output high-side measurement current shunt monitor

INA240PMPWTPSEP is a zero-drift, voltage-feedback current-sense amplifier supporting common-mode voltages up to 80 V on low or high-side configurations. It achieves a minimum 120 dB common-mode rejection ratio and 25 µV maximum input offset, with enhanced PWM rejection for motor-drive systems. Packaged in Space Enhanced Plastic SOIC, it targets space-grade power monitoring and industrial motor control.

Radiation hardened supply-voltage supervisor in Space Enhanced Plastic

40V,low-/high-side, zero-drift, voltage output CSA w/low bias current & enable in WCSP package

40V, bi-directional, low-/high-side, zero-drift, voltage output CSA w/low bias current and enable

Texas Instruments PTLV9102IPWR is a low-power, rail-to-rail input/output operational amplifier with a 1 MHz gain-bandwidth product and a 16 V supply range, offering 110 dB typical CMRR and 1750 µV maximum offset voltage. Available in an SOIC-8 package for space-constrained analog signal conditioning designs.

45-W, 2.1-MHz Digital input 4-channel automotive class-D audio amplifier

Texas Instruments XA1243FPBGABL is a high-performance integrated circuit in a 161-ball FCBGA package designed for advanced signal processing and communication applications. Provides dense integration with 161 pins enabling high I/O bandwidth in compact board footprint. Available in stock with worldwide shipping.

The PLM2904BQDRQ1 is an automotive-grade dual op-amp from Texas Instruments with 96 dB CMRR, 50 nA max bias current, and 4 mV max offset in an 8-pin SOIC package. It is AEC-Q100 qualified for harsh automotive environments. Available in stock with worldwide shipping.

PS7B8250QDRVRQ1 is an automotive-grade 300 mA high-voltage ultra-low-IQ LDO linear regulator by Texas Instruments in a 6-pin SON package. It supports input voltages from 6 V to 40 V with a maximum dropout voltage of 1 V and 0.01% line regulation. Suitable for automotive body electronics, always-on keep-alive circuits, and battery-management systems.

XCC3235MODSF12MOBR is a Texas Instruments SimpleLink Wi-Fi CERTIFIED dual-band wireless module supporting IEEE 802.11a/b/g/n on both 2.4 GHz and 5 GHz bands. The certified module integrates an onboard antenna, RF front-end, and Wi-Fi subsystem to simplify design. Targeted at IoT, industrial connectivity, and smart home applications requiring certified dual-band wireless connectivity.

Four-port USB 3.2 x1 Gen1 hub with USB billboard

Automotive 60-V, 5-µA IQ, 100-mA low-dropout (LDO) voltage regulator with enable and power good

32-Bit Digital Signal Controller with Flash

Single Supply-Voltage Supervisor

1.5-A Low-Noise Fast-Transient-Response Low-Dropout Regulator

10-Bit, 28 MSPS 1-Channel AFE for CCD Sensors

TLV2450IDBVT is a single-channel micropower rail-to-rail input and output operational amplifier from Texas Instruments with integrated shutdown function in a 6-pin SOT-23 package. It features 70 dB minimum common-mode rejection ratio, 5 nA typical bias current, and unity-gain stable voltage-feedback architecture. Designed for portable and battery-powered signal conditioning circuits requiring ultra-low quiescent current.

Advanced LinCMOS™ Rail-To-Rail Quad Operational Amplifier

Use the download button to access the TLC27L1AID schematic symbol, PCB footprint, and 3D model.

SOP-14

Ultra-Low Power MSP430 1.8V Split-Rail I/O