Texas Instruments

True 16-bit, 8-channel, SPI-interface voltage-output DAC from Texas Instruments, featuring a precision internal reference of up to 4.096 V and output voltage swing up to 11 V. Delivers exceptional linearity with INL error as low as 0.0015%, ideal for industrial automation and precision instrumentation. Available in compact 16-ball WCSP package; in stock worldwide with fast shipping.

True 16-bit, 8-channel, SPI, voltage-output DAC in WCSP package with precision internal reference

100-V Three-Phase Smart Gate Driver With Buck Regulator

Voltage Mode PWM Controller 60V 200mA 16-Pin SOIC Tube

OP Amp Single Current Fdbk ±7.5V/15V 8-Pin HVSSOP EP T/R

5-V Multichannel RS-232 Line Driver/Receiver with +/-15-kV ESD Protection

IC OPAMP GP 2 CIRCUIT 8DIP

The UC2524ANG4 is a voltage-mode PWM controller IC supporting input voltages from 8V to 40V with switching frequencies up to 500 kHz. It integrates a 5.1V reference at 200 mA output current in a 16-pin DIP package. Available from stock with worldwide shipping.

Voltage Mode PWM Controller 100mA 16-Pin SOIC Tube

Octal Bus Transceiver With 3-State Outputs

Bus Transceivers Octal Bus Trnscvr With 3-State Outputs

NAND Gate 3-Element 3-IN CMOS 14-Pin CDIP Tube

Zero Delay Buffer 8-Out Single-Ended 16-Pin SOIC Tube

Latch Transparent 3-ST 8-CH D-Type 20-Pin CDIP Tube

TEXAS INSTRUMENTS - LP3872EMP-2.5 - IC, V REG, LDO 1.5A, SMD, SOT223-5

LVDS Receiver 630Mbps 38-Pin TSSOP T/R

Interface - I/O Expanders Remote 16-Bit I2C & SMBus I/O Expander

Zero Delay Buffer 8-Out Single-Ended 16-Pin SOIC T/R

LVDS Interface IC 9-Bit 4-Port Univ Bus Exchg W/3-St Otp

Octal Channel Single ADC SAR 100ksps 16-bit Serial 20-Pin SSOP Tube

Clock Drivers & Distribution 1:8 3.3-V PLL CLOCK DRIVER

Voltage References Adjustable Precision Shunt Regulator

The ADS8345NG4 is a 16-bit 8-channel successive approximation ADC from Texas Instruments in a 20-pin SSOP package. It features a 6.66 µs maximum conversion time, 0.0122% maximum linearity error, and a ±2.5V analog input range. Available from authorized distributors with worldwide shipping.

The ADS8345EBG4 is a 16-bit, 6-channel serial output analog-to-digital converter from Texas Instruments, providing high-resolution data acquisition with a maximum sampling rate of 100kSPS and SPI-compatible serial interface. It operates from a single 5V supply with internal reference support. Ideal for precision industrial measurement, process control, and data logging applications.

The SN74LS640NE4 is an octal inverting bus transceiver from Texas Instruments, offering 8-channel bidirectional data transfer with three-state outputs and direction control. It features TTL-compatible logic levels in a 20-pin PDIP package and is ideal for interfacing data buses. Available in stock worldwide with fast shipping.

16-V, 50-mA, Low Iq, Low-Dropout Linear Regulator

The CD74HC365MT is a hex non-inverting buffer and line driver from Texas Instruments, belonging to the HC/UH CMOS logic family with dual active-LOW output-enable inputs and unidirectional 6mA output drive capability. It operates from 2V to 6V supply and is packaged in a 16-pin SOIC. Suitable for bus expansion and signal buffering in 3.3V and 5V digital systems.

LDO Regulator Pos 5V 0.25A 8-Pin SOIC T/R

74 Series Transceiver, Non-Inverting 1 1.65V ~ 3.6V TSSOP-20 RoHS

Inverter 6-Element CMOS 14-Pin SOIC Tube

Processor Supervisor 2.93V/1.68V 1.8V/3.3V 8-Pin HVSSOP EP T/R

Operational Amplifiers - Op Amps 1MHz 45uA RRIO Quad Op Amp

Single Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R

IC DRIVER DOT BAR DISPLAY 18-DIP

1-Channel Single ADC Delta-Sigma 128sps 16-bit Serial 6-Pin SOT-23 T/R

2.95V to 6V, 4A Step-Down Power Module in 9x11x2.8mm QFN Package

High Speed Operational Amplifiers Ultra-Wideband Current Feedback

LDO Regulator Pos 3V 0.5A 8-Pin SOIC Tube

High Speed Operational Amplifiers Ultra-Wideband Current Feedback

The DRV8873SPWPRQ1 is an automotive-grade H-bridge DC motor driver in a 24-pin HTSSOP package, rated for 10A peak output current with integrated current sensing and current sense output. AEC-Q100 qualified for automotive applications, it features advanced protection circuitry and enables precise motor torque control in power windows, seat adjusters, and HVAC actuators.

Low-Power, RRIO, 1-MHz, Operational Amplifier for Cost-Sensitive Systems

MSP430G2x33, MSP430G2x03 Mixed Signal Microcontroller

USB Type-C SBU Multiplexer

The PDRV8847SPWR is a 2A dual H-bridge motor driver and stepper motor controller in a TSSOP power package, enabling bidirectional control of two DC motors or one bipolar stepper motor. It features integrated protection circuitry, PWM current control, and a simple logic interface, making it ideal for compact robotics, printers, and consumer automation applications.

LDO Regulator Pos 2.9V 0.1A 5-Pin SOT-23 T/R

The MAX3232EIDBRE4 is a multichannel RS-232 line driver/receiver IC operating from 3 V to 5.5 V supply with Schmitt trigger inputs and EIA/TIA-232-F compliance. Available from Texas Instruments with worldwide shipping.

Buffer/Line Driver 8-CH Non-Inverting 3-ST Bipolar 20-Pin SOIC Tube

Buffer/Line Driver 2-CH Non-Inverting 3-ST CMOS 8-Pin SSOP T/R

Use the download button to access the SN74S1051PW schematic symbol, PCB footprint, and 3D model.

The PUCC21220AD is a 4-A/6-A isolated dual-channel gate driver from Texas Instruments with 3.0-kVRMS isolation, enabling reliable IGBT and MOSFET control. It integrates two independent drive channels in a compact Small Outline Package. Available from stock with worldwide shipping.