Texas Instruments

Analog to Digital Converters - ADC Hi Sp Hi Res 625kSPS 24B Delta Sigma ADC

Latch Addressable Open Drain 8-CH D-Type Automotive 24-Pin SOIC T/R

Automotive capacitor-free 300-mA LDO regulator with foldback current limit for portable devices

TLV73330PQDBVRQ1 is an AEC-Q100 qualified automotive-grade capacitor-free 300 mA LDO regulator with a 3.0 V fixed output, 3.5 V to 5.5 V input range, and 125 mV typical dropout voltage. Foldback current limiting protects against short-circuit conditions, and the design operates without an external output capacitor. The 5-pin SOT-23 package suits automotive sensor modules and portable infotainment power rails.

Switching Voltage Regulators 9.5-95V Wide Vin, 150mA Constant On-Time Non-Synchronous Buck Regulator 8-VSSOP -40 to 125

Automotive capacitor-free 300-mA LDO regulator with foldback current limit for portable devices

Impedance Track™ battery gas gauge solution for 1-series cell li-ion battery packs

The PTPS3840PL25DBVRQ1 is an automotive-qualified single-channel voltage supervisor IC from Texas Instruments with manual reset and programmable reset time delay. It monitors supply rails in automotive ECUs and provides a reset output with adjustable delay in a compact SOT-23-5 package. Available with in-stock worldwide shipping.

Texas Instruments PTPS3840PH27DBVRQ1 is an automotive-grade high-input voltage supervisor with manual reset and programmable reset time delay in a 5-pin SOT-23 package. Single-channel design supports AEC-Q100 automotive environments. Available from stock with worldwide shipping.

Use the download button to access the ISO1452DWR schematic symbol, PCB footprint, and 3D model.

10-MHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems

Use the download button to access the SN74LVC2G34DCK3 schematic symbol, PCB footprint, and 3D model.

16-bit Microcontrollers - MCU

PTPS3840DL42DBVRQ1 is an automotive-grade high-input-voltage supervisor with manual reset input and programmable reset time delay in a 5-pin SOT-23 package. It monitors a single supply rail and asserts a reset signal during undervoltage conditions, supporting AEC-Q100 automotive applications from -40°C to +125°C.

Texas Instruments XSN6505DQDBVTQ1 is an automotive-grade AEC-Q100 low-noise 1 A transformer driver for isolated power supplies switching at 420 kHz in SOT-23-6 package. Operates from 2.25 V to 5.5 V supply. Available from stock worldwide with fast shipping.

Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs

IC DRVR 7 SEGMENT 1 DIGIT 16DIP

UCC21540DWK is a dual-channel, high-side and low-side IGBT/MOSFET gate driver from Texas Instruments designed for half-bridge power topologies. It features reinforced isolation, 4 A source and 6 A sink peak drive currents, and Schmitt trigger inputs for robust noise immunity. Ideal for industrial motor drives, solar inverters, and EV traction inverter designs.

TPS3808G15DBVRG4 is a programmable-delay supervisory circuit from Texas Instruments that monitors a 1.5V rail with a fixed threshold and generates a reset output with configurable delay. It is a single-channel voltage supervisor in a compact 6-pin SOT-23 green Pb-free package with JESD-609 e4 compliance. Available from stock worldwide with competitive pricing.

Use the download button to access the OPA1656ID schematic symbol, PCB footprint, and 3D model.

SN74LS181N3 is a 4-bit arithmetic logic unit (ALU) and function generator in a 24-PDIP package, operating from 5 V supply with up to 70°C ambient temperature. It supports 16 arithmetic and 16 logic operations, with internal carry lookahead for high-speed operation. Suitable for CPU data-path, digital signal processing, and bus-oriented computing systems.

Logic Gates Quad Pos-OR Gate W/Schm-Trger Inpts

Use the download button to access the OPA1656IDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TPS562231DRLT schematic symbol, PCB footprint, and 3D model.

Digital to Analog Converters - DAC 8-Bit 3 us DAC Serial Input

Digital to Analog Converters - DAC 16-Bit Serial Input Multiplying DAC

TPS70158PWPR is a dual-output fixed LDO voltage regulator from Texas Instruments with 4.3 V to 6 V input range and 275 mV maximum dropout. It delivers two regulated outputs in a 20-pin SOIC package for multi-rail power designs. From $1.50 in stock, worldwide shipping.

Use the download button to access the ISO1430DWR schematic symbol, PCB footprint, and 3D model.

Digital to Analog Converters - DAC 16-Bit Serial Input Multiplying Cnvtr

Adjustable and fixed 1-A 16-V positive-voltage low-dropout (LDO) linear regulator

LDO Voltage Regulators Dual-Output LDO Voltage Regulator

The Texas Instruments SN74ABT16952DLRG4 is a 16-bit registered bus transceiver with 3-state outputs, independent output enables for each direction, and clock enable in the ABT logic family. It provides bidirectional data transfer with register capability and 64mA output current in a 56-pin SOP package. Available from stock with worldwide shipping.

Use the download button to access the ISO1432BDWR schematic symbol, PCB footprint, and 3D model.

Adjustable and fixed 1-A 16-V positive-voltage low-dropout (LDO) linear regulator

Texas Instruments DAC7616U, 4-Channel Serial DAC, 89ksps, 16-Pin SOIC

LDO Regulator Pos 2.5V 0.5A 8-Pin SOIC T/R

Automotive 60-V three-phase smart gate driver

Digital to Analog Converters - DAC 8-Bit 3 us DAC Serial Input

Texas Instruments PLMK00804BQWRGTTQ1 is a 1-to-4 LVCMOS fan-out clock buffer and level translator operating from 1.5V to 3.3V supply. It provides 4 low-skew outputs with differential MUX input conditioning for high-performance clock distribution. Available in 16-pin QFN package from global stock.

16位微控制器 - MCU MSP430F6721A Mixed-Signal Microcontrollers 100-LQFP -40 to 85

The UCC2806DWTRG4 is a low-power dual-output current-mode PWM switching controller by Texas Instruments supporting 8V to 14.5V input. Key specs: current-mode PWM control, 12V nominal supply, adjustable mode from 2.5V to 15V, 16-pin SOIC package. Available with worldwide shipping.

Voltage References Micropwr Integrated Precision

Battery Charger Li-Ion 2500mA 3.5V to 4.44V 24-Pin VQFN EP T/R

Texas Instruments BQ24161YFFT, Lithium-Ion, Battery Charge Controller IC, 2.5A 49-Pin, DSBGA

Texas Instruments TL2218-285PW is a 5 V active SCSI bus terminator IC supporting 9 signal lines in a 20-pin TSSOP package with Pb-free construction. It provides precision 110 Ω termination impedance to reduce signal reflections on SCSI bus lines operating at up to 5 V. This terminator suits SCSI storage subsystems, RAID controllers, and legacy embedded storage interface boards requiring compact bus termination.

USB Interface IC USB TYPE-C DP Alt Mode Linear Redriver Crosspoint Switch for Sink Side 40-WQFN -40 to 85

MCU 16-bit MSP430 RISC 32KB Flash 2.5V/3.3V 100-Pin LQFP T/R

Digital to Analog Converters - DAC 8-Bit 3 us DAC Serial Input

CD74HCT259M96E4 is an 8-bit addressable latch with 1-to-8 demultiplexer function from Texas Instruments in the HCT family, accepting TTL-level inputs at 5 V. It routes a single data input to one of 8 latched outputs selected by a 3-bit address, with 4 mA output drive in a 16-pin SOIC package. Available from stock worldwide for output port expansion and serial-to-parallel data distribution in 5 V TTL-compatible systems.

SN7472N is a TTL-family master-slave J-K flip-flop from Texas Instruments with three AND-ed J and K inputs, complementary outputs, and 15 pF load capacitance in a classic 14-pin DIP package. From $0.50 in stock worldwide shipping.