Texas Instruments

Quadruple Bilateral Analog Switch

High-Speed Fully-Differential Amplifiers

Buffer/Line Driver 2-CH Non-Inverting 3-ST CMOS 8-Pin VSSOP T/R

Counter/Divider Single 12-Bit Binary UP 16-Pin CDIP Tube

Very-Low-Power Stereo Codec With DirectPath™ HP Amplifier

The TPS63710 is an inverting step-down DC-DC converter that generates a stable negative output voltage from a positive input supply. It supports output voltages down to -15V with up to 500mA output current and operates from a 2.7V to 5.5V input range, making it ideal for op-amp bias rails, LCD display bias, and MEMS microphone power supply applications.

SP Amp DIFF AMP Single ±7.5V/15V 8-Pin HVSSOP EP T/R

OP Amp Quad GP R-R I/O ±3V/6V 16-Pin SOIC Tube

Interface - I/O Expanders Rem 16B I2C & SMBus I/O Expander

Texas Instruments TLV2455IDRG4 is a quad general-purpose rail-to-rail input/output operational amplifier operating from ±3V to 6V supply in a 16-pin SOIC package. Achieves 80dB typical CMRR, 5nA bias current, and 2mV max offset voltage for precision signal conditioning. Available from authorized distributors with worldwide shipping.

Flip Flops Dual Positive-Edge-Triggered D-Type Flip-Flops With Clear And Preset 14-TSSOP -40 to 125

Flip Flop D-Type Pos-Edge 2-Element 14-Pin SOIC Tube

The TLV2451CDBVTG4 is a single general-purpose rail-to-rail input/output operational amplifier operating from ±3 V or single 6 V supply. It features 70 dB minimum CMRR, 2 mV maximum input offset voltage, and 5 pA maximum bias current in a 5-pin SOT-23 package. From $0.35 in stock worldwide shipping.

Conv DC-DC 4.5V to 18V Synchronous Step Down Dual-Out 0.68V to 1.95V 5A/5A 36-Pin VQFN EP T/R

The SN65HVD20DG4 is a single-channel RS-485/RS-422 transceiver IC from Texas Instruments with differential Schmitt trigger input and extended common-mode range. It supports data rates up to 10 Mbps, operates from a 3.3 V supply, and features fail-safe open-circuit, short-circuit, and terminated-line receiver outputs. Available from stock worldwide with fast shipping.

Operational Amplifiers - Op Amps Sngl Mcrpwr R-to-R Input/Output Op Amp

LVDS Serializer Automotive 64-Pin VQFN EP T/R

The TLV2451CPE4 is a single-channel, general-purpose rail-to-rail input and output CMOS operational amplifier from Texas Instruments, operating from ±3V to ±6V (or single 6V) supply. It provides 70 dB minimum CMRR, 2 mV maximum input offset voltage, and low bias current of 5 nA. Housed in an 8-pin PDIP through-hole package, it is suitable for low-voltage signal conditioning and sensor interface applications.

SOP-8

Driver 4.5A 2-OUT Lo Side Non-Inv 8-Pin SOIC T/R

Single Channel Single ADC SAR 125ksps 12-bit Parallel 28-Pin PDIP Tube

Interface - I/O Expanders Remote 16-Bit I2C & SMBus I/O Expander

The TPS54872PWPG4 is a voltage-mode PWM synchronous buck switching regulator from Texas Instruments operating from a 4 V to 6 V input supply in a 28-pin SOIC package. It delivers efficient DC-DC step-down conversion with pulse width modulation control for stable output regulation. Available RoHS-compliant with worldwide distribution.

IC SERIALIZER HDMI TO FPD 64VQFN

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin SOIC Tube

Inverter Schmitt Trigger 6-Element CMOS 14-Pin SOIC T/R

IC TXRX RS485 EXT MODE 8-SOIC

Latches Tri-St Octal D-Type

0.9-Ω, 5-V, 1:1 (SPST), 1-channel analog switch (active low)

SOP-20

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz R-to-R Otpt Oper Amp

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz R-to-R Otpt Oper Amp

The TL5001ACDG4 is a PWM DC-to-DC switching controller from Texas Instruments designed for voltage-mode control in power supply designs. It accepts input voltages from 3.6V to 40V and supports adjustable output regulation with built-in oscillator and error amplifier. Packaged in an 8-pin SOIC, it suits industrial, telecom, and embedded power conversion applications.

Op Amp Dual High Speed Amplifier R-R O/P ±2.7V/5.4V 8-Pin VSSOP T/R

The TLV2772IDGKRG4 is a dual operational amplifier from Texas Instruments featuring rail-to-rail output, 2.7V supply operation, and high slew rate performance. It offers 3MHz gain bandwidth, low offset voltage of 2.7mV, and operates across -40°C to 125°C industrial temperature range. Available in MSOP-8 package, suitable for precision signal conditioning and portable battery-powered systems.

Operational Amplifiers - Op Amps 550-uA/Ch 3-MHz Rail-to-Rail Out

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 20-Pin PDIP Tube

The TLV2772AIDG4 is a dual-channel, high-slew-rate operational amplifier from Texas Instruments, designed for rail-to-rail output operation from a 2.7V single supply. It features 60 dB minimum CMRR, 350 µV maximum bias current, and is optimized for low-voltage signal processing applications. Housed in an 8-pin SOIC package, it is ideal for portable instrumentation, battery-powered devices, and audio amplification circuits.

DC DC Cntrlr Single-OUT PWM DC to DC Controller 3.6V to 40V Input 8-Pin SOIC T/R

Operational Amplifiers - Op Amps Dual Micropwr 2.5V RRIO Single Supply

Comparator Single 8V 5-Pin SOT-23 T/R

The PDRV110AQPWRQ1 is an automotive-grade single-channel low-side current controller from Texas Instruments designed for driving relays, solenoids, and valves. It uses PWM current-mode control with a 6 V to 15 V input range and is AEC-Q100 qualified for harsh automotive environments. Available in a 14-pin SOP package with worldwide in-stock shipping.

Counter Single 4-Bit Async Binary UP/Down 16-Pin SOIC T/R

The CD74ACT164M96G4 is an 8-bit serial-in, parallel-out shift register from Texas Instruments, designed for high-speed data conversion from serial to parallel format. Based on the ACT logic family, it operates up to 70 MHz clock frequency with 24 mA output drive capability. Available in a 14-pin SOIC package, this device is ideal for data serialization, LED driving, and parallel port expansion in embedded systems.

Use the download button to access the SN74HC74QDRQ1 schematic symbol, PCB footprint, and 3D model.

The LM7171AIN is a high-speed voltage-feedback operational amplifier from Texas Instruments in an 8-pin DIP package. It delivers 200 V/µs slew rate with 1.5 mV maximum input offset voltage and 104 dB typical CMRR, operating with unity-gain stable design for minimum closed-loop gain of 2. Suitable for video and imaging signal chains.

Inverter 6-Element CMOS 14-Pin SOIC T/R

VQCCN,

Supervisory Circuits Battery-Backup for RAM Retention

The TPS65100PWPRG4 is a quad output LCD power supply IC for TFT displays, integrating boost, SEPIC, and inverting converters. It operates from 2.7 V to 5.8 V input and provides regulated positive and negative voltages for LCD bias. Available in a compact 24-pin HTSSOP package with worldwide in-stock supply.