Microchip

QFN-20

Microchip MCP4641 is a dual-channel, 128-step, 5 kOhm I2C digital potentiometer with non-volatile EEPROM, 2 kHz bandwidth, and 1.8 V to 5.5 V supply in a compact TSSOP-14 package. From $1.10 in stock worldwide shipping.

Microchip MCP6001RT-I/OT is a single rail-to-rail input/output operational amplifier with 1 MHz gain-bandwidth product, operating from a 1.8 V to 6 V supply with a 60 dB minimum CMRR. It features a 600 µA maximum supply current and a 4500 µV maximum input offset voltage in a SOT-23-5 package. Available worldwide from authorized distributors.

Microchip MCP4132-104E/SN is a single-channel 7-bit digital potentiometer with 100 kΩ end-to-end resistance, controlled via an increment/decrement SPI interface in an SOIC-8 package. It supports 128 wiper positions with 0.1 kHz bandwidth for volume and gain control. Available with worldwide shipping.

Microchip MCP4822-E/SN is a dual-channel 12-bit SPI digital-to-analog converter in SOIC-8 package with internal voltage reference and rail-to-rail output. It provides two independent DAC channels with a maximum output of 4.096 V and operates from 2.7 V to 5.5 V. Available in stock worldwide with fast shipping.

The MCP4651-502E/ST is a dual-channel digital potentiometer from Microchip with 256 steps and a 5 kΩ end-to-end resistance, controlled via a 2-wire I2C interface. It comes in a 14-pin TSSOP package and is suitable for gain control, offset adjustment, and calibration in analog signal chains.

The MCP4822-E/MS is a dual-channel 12-bit DAC from Microchip with an SPI serial interface, providing up to 4.176 V analog output in an 8-pin MSOP package. It features an internal voltage reference for stand-alone operation without external reference components. Suitable for precision signal generation, calibration, and analog control in industrial, medical, and consumer electronics designs.

Microchip MCP4662-503E/UN is a dual-channel, 256-step, 50 kOhm non-volatile digital potentiometer with I2C interface in 10-pin MSOP package. Ideal for automated gain control, signal conditioning, and programmable voltage divider applications.

The MCP4662-104E/UN is a dual-channel, 256-step, 100 kΩ non-volatile digital potentiometer with increment/decrement control interface from Microchip. It retains wiper position after power cycling and is housed in a 10-pin MSOP package, ideal for programmable gain, offset, and bias adjustment applications.

MCP4642-104E/UN is a dual-channel, non-volatile digital potentiometer from Microchip with 128 wiper steps and a 100 kOhm end-to-end resistance per channel. It uses an I2C-compatible increment/decrement control interface with 0.1 kHz bandwidth and stores wiper positions in non-volatile memory. Packaged in a 10-pin MSOP for compact analog trimming in consumer and industrial electronics.

Microchip MCP4662-103E/UN is a dual-channel 10 kΩ digital potentiometer with 257 wiper positions controlled via I2C interface in a 10-pin MSOP package. Features non-volatile memory to retain wiper settings through power cycles and 1 kHz bandwidth for audio and control loop tuning applications. Available from stock worldwide with short lead times for embedded system designs.

The MCP4652-502E/UN is a 256-step single digital potentiometer from Microchip with a 5 kΩ end-to-end resistance, 2-wire I2C serial interface, and 2 kHz bandwidth in a 10-pin MSOP package. It stores wiper position in non-volatile EEPROM and operates from 2.7 V to 5.5 V for reliable power-on recall. Available from global distributors with worldwide shipping.

Microchip MCP4642-103E/UN is a dual-channel I2C digital potentiometer with 129 steps and 10 kOhm end-to-end resistance, featuring non-volatile memory to retain wiper position through power cycles. It comes in a compact MSOP-10 package with RoHS compliance. Available for worldwide shipping.

Microchip MCP4541-503E/MS is a single-channel 7-bit non-volatile digital potentiometer with 50 kOhm end-to-end resistance and I2C increment/decrement interface in an 8-pin MSOP package. Available from stock with worldwide shipping.

Microchip MCP4652-103E/UN is a dual-channel I2C digital potentiometer with 256 steps and 10 kOhm end-to-end resistance featuring non-volatile EEPROM wiper memory in an MSOP-10 package. Offers 2 kHz bandwidth per channel. Available from stock with worldwide shipping.

The MCP4651-104E/ST is a dual-channel 256-step digital potentiometer from Microchip with 100 kΩ resistance, I2C 2-wire serial interface, and non-volatile wiper position memory. Housed in a 14-pin TSSOP package for compact digitally-controlled gain and offset adjustment. From $1.50 in stock with worldwide shipping.

MCP4661-502E/ST is a dual-channel 5 kΩ digital potentiometer from Microchip Technology with 256 wiper positions per channel, I2C increment/decrement control, and integrated non-volatile memory. It is housed in a 14-pin TSSOP package for compact mixed-signal board layouts. From $1.20, in stock, worldwide shipping.

MCP4652-503E/UN is a dual-channel, I2C-controlled digital potentiometer by Microchip Technology, offering 256 wiper positions and a 50 kΩ end-to-end resistance in a 10-pin MSOP package. Key specs: 2 kHz signal bandwidth, 2-wire I2C interface, non-volatile wiper position memory. Available in Pb-free MSOP-10 packaging for gain control, offset adjustment, and calibration applications.

The MCP4661-103E/ST is a dual-channel 10 kΩ digital potentiometer with 257 wiper positions and I2C interface from Microchip, featuring non-volatile memory. It is ideal for precision calibration, gain control, and bias adjustment in compact TSSOP-14 form.

MCP4651-503E/ST is a Microchip 256-step digital potentiometer with 50 kΩ end-to-end resistance, 2-wire I2C control interface, and 2 kHz bandwidth in a 14-pin TSSOP surface-mount package. Available in stock with competitive pricing and worldwide shipping.

The MCP3427-E/MF is a 2-channel, 16-bit delta-sigma ADC from Microchip with an I2C interface, sampling at up to 15 SPS in 16-bit mode with a built-in 2.048 V reference and programmable gain amplifier. Housed in a compact DFN-10 package, it is optimized for precision low-speed sensor measurement applications.

Microchip MCP4342 is a quad-channel 7-bit digital potentiometer with 128 steps and 100 kOhm resistance, controlled via 3-wire SPI in TSSOP-14 package. It enables precise electronic resistance adjustment in calibration and gain-control circuits. Available in stock worldwide with fast shipping.

Microchip MCP4541-103E/MS is a single-channel 10 kΩ 7-bit digital potentiometer with I2C increment/decrement interface and non-volatile memory in an 8-pin MSOP package. Wiper position is retained across power cycles. Available from stock with worldwide shipping.

The MCP4642-502E/UN is a dual-channel non-volatile digital potentiometer with 128 resistance steps and a 5 kΩ end-to-end resistance, controlled via increment/decrement interface in an MSOP-10 package. It stores the wiper position in non-volatile memory so the last setting is retained after power removal. Available from stock with Pb-free RoHS-compliant construction and worldwide shipping.

The MCP3551-E/SN is a 22-bit single-channel delta-sigma ADC from Microchip Technology with 15 samples per second output rate and built-in 50/60 Hz rejection in an 8-pin SOIC package. It accepts differential analog inputs up to ±2.5 V and provides high resolution for precision measurement applications. Available from authorized distributors with worldwide shipping.

Microchip MCP4642-503E/UN is a dual-channel, 128-step, 50 kOhm digital potentiometer in a 10-pin MSOP package with non-volatile memory for wiper position retention. It uses an increment/decrement control interface and targets programmable bias, gain adjustment, and calibration applications.

The MCP4641-503E/ST is a dual-channel, 7-bit (128-step) digital potentiometer with 50 kΩ end-to-end resistance from Microchip featuring non-volatile EEPROM memory. It uses an increment/decrement SPI-compatible control interface and is housed in a 14-pin TSSOP package. Ideal for programmable gain, contrast control, and system calibration in consumer and industrial electronics.

The MCP4561-103E/MS is a single-channel 10 kohm digital potentiometer IC by Microchip with non-volatile memory in an 8-pin MSOP package, featuring increment/decrement control interface and 1 kHz bandwidth. It retains wiper position through power cycles without battery backup. Available from authorized distributors with worldwide shipping.

Microchip MCP4631-503E/ST is a single-channel digital potentiometer with 128 resistive steps and selectable end-to-end resistance values of 5 kOhm, 10 kOhm, or 50 kOhm, controlled via a 2-wire I2C serial interface in a 14-pin TSSOP package. It delivers 2 kHz nominal bandwidth for audio and low-frequency analog adjustment applications. Available from stock with worldwide shipping.

Microchip MCP4641-104E/ST is a dual-channel 7-bit digital potentiometer with 100 kΩ end-to-end resistance, 128 steps, non-volatile memory, and increment/decrement interface, packaged in a 14-pin TSSOP for adjustable bias and gain control.

The MCP4632-503E/UN is a dual-channel I2C digital potentiometer from Microchip, offering 128 steps and 50 kΩ end-to-end resistance in a 10-pin MSOP package. Available in stock with worldwide shipping.

Microchip MCP4632-104E/UN is a dual-channel digital potentiometer with 128 steps and 100 kOhm end-to-end resistance, controlled via I2C 2-wire serial interface, housed in an MSOP-10 package. Available from global distributors with worldwide shipping.

Microchip MCP4532-503E/MS is a single-channel 50 kΩ digital potentiometer with 128 wiper positions and 2-wire I2C interface in an 8-pin MSOP package. It provides 2 kHz nominal bandwidth and supports 5 kΩ, 10 kΩ, and 50 kΩ resistor array variants. From $0.90, in stock, worldwide shipping.

Microchip MCP4641-103E/ST is a dual-channel 10 kΩ digital potentiometer with 129 taps, I2C interface, and non-volatile memory in a TSSOP-14 package. Supports increment/decrement control and retains wiper position through power cycles. Available with worldwide shipping.

The MCP4631-104E/ST is a dual-channel 7-bit digital potentiometer from Microchip with 10 kOhm end-to-end resistance and I2C interface, housed in a 14-pin TSSOP package. It provides 128 wiper positions per channel with volatile memory for runtime resistance adjustment. Available from stock with worldwide shipping.

Microchip MCP4631-502E/ST is a dual 7-bit I2C digital potentiometer with a 5 kΩ resistor array, 2 kHz bandwidth, and volatile wiper memory, packaged in a 14-pin TSSOP for programmable resistance control. From $0.90 in stock worldwide shipping.

MCP4561-503E/MS is a single-channel, 7-bit non-volatile digital potentiometer with a 50 kΩ nominal end-to-end resistance and I2C increment/decrement control. It retains the wiper position across power cycles using on-chip EEPROM memory. Ideal for audio volume, gain, offset, and calibration adjustment circuits in MSOP-8 packaging.

Microchip MCP4562-503E/MS is a single-channel, 50 kΩ, 256-position non-volatile digital potentiometer controlled via I2C increment/decrement interface. Retains wiper position through power cycles using internal EEPROM and operates from 2.7 V to 5.5 V in an 8-pin MSOP package. Available from stock with worldwide shipping.

Microchip MCP4551-103E/MS is a single-channel 10 kΩ I2C digital potentiometer with 8-bit (256-step) resolution and a 2 kHz bandwidth, housed in an 8-pin MSOP package. It provides volatile wiper position control via a 2-wire I2C interface for programmable gain, volume, and calibration applications. Available from stock worldwide with fast shipping.

Microchip MCP4551-503E/MS is a single-channel I2C digital potentiometer with 256-step resolution and 50 kOhm end-to-end resistance operating up to 2 kHz bandwidth. It uses a 2-wire serial interface and includes non-volatile wiper storage in a compact 8-pin MSOP package. Available in stock from authorized distributors with worldwide shipping.

The MCP4561-502E/MS is a single-channel 5 kΩ digital potentiometer from Microchip with non-volatile memory and an increment/decrement control interface supporting 2 kHz bandwidth. It provides 256 wiper positions accessible via I2C and retains the last wiper setting after power-down, housed in an 8-pin MSOP package. Suited for programmable gain, offset trimming, and calibration in embedded analog designs.

MCP4552-503E/MS by Microchip is a single-channel, 256-position, 50 kΩ digital potentiometer with 2-wire I2C interface in an 8-pin MSOP package. It operates from 2.7 V to 5.5 V with 2 kHz bandwidth and supports non-volatile wiper memory for persistent resistance settings. Available worldwide with fast shipping from authorized distributors.

Microchip MCP4532-104E/MS is a single-channel 100 kΩ digital potentiometer with 128 steps, controlled via 2-wire I2C interface. The MSOP-8 package and 2 kHz bandwidth make it ideal for programmable gain, bias, and audio calibration applications in compact designs.

MCP4531-503E/MS is a single-channel 128-step 50 kΩ digital potentiometer from Microchip with I2C interface, non-volatile wiper memory, operating from 2.7 V to 5.5 V. From $0.90 in stock worldwide shipping.

MCP4552-502E/MS is a single-channel 7-bit I2C digital potentiometer from Microchip with a 5 kΩ end-to-end resistance and 128 wiper positions. It operates from 2.7 V to 5.5 V and is housed in an 8-pin MSOP package for space-constrained designs.

MCP4531-502E/MS is a single-channel 7-bit digital potentiometer with a 5 kΩ end-to-end resistance and 128 wiper steps. Controlled via 2-wire I2C interface in a compact MSOP-8 package. Used for programmable gain, offset, and calibration adjustments in audio, sensor, and analog control circuits.

Microchip MCP4551-502E/MS is a single-channel 5 kOhm digital potentiometer with 256 wiper steps, 2-wire I2C serial interface, and 2 kHz bandwidth in MSOP-8 package. Available in 5 kOhm, 10 kOhm, and 50 kOhm variants. Available from stock with worldwide shipping.

MCP4552-104E/MS is a single-channel 7-bit digital potentiometer with 100 kΩ end-to-end resistance, 2-wire I2C serial interface, and 2 kHz bandwidth in an 8-pin MSOP package, designed for programmable gain, offset, and calibration circuits. From $1.20, in stock, worldwide shipping.

MCP4362-104E/ST is a quad-channel 100 kΩ digital potentiometer from Microchip Technology with 256 wiper positions per channel and SPI 3-wire serial control. It integrates non-volatile wiper position storage and 4 independent resistors in a 14-pin TSSOP package. From $1.80, in stock, worldwide shipping.

Microchip MCP4362-503E/ST is a quad-channel digital potentiometer with 256 resistive steps and 50 kOhm end-to-end resistance, controlled via a 3-wire SPI serial interface in a 14-pin TSSOP package. It integrates 4 independent wiper functions with 0.2 kHz nominal bandwidth for precision analog adjustment. Available from stock with worldwide shipping.