MCP6022-E/SN Microchip Integrated Circuit (Small Outline Packages) In Stock
Microchip MCP6022-E/SN is a dual rail-to-rail output operational amplifier with 10 MHz gain-bandwidth product and 90 dB typical CMRR. It features 5 nA max bias current and voltage-feedback architecture in an SOIC-8 package operating from 2.5 V to 5.5 V. Available in stock worldwide with fast shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6022-E/SN Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.3400(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP6022-E/SN?
- Dual voltage-feedback op-amp with 10 MHz gain-bandwidth product and 90 dB typical CMRR, enabling precision active filter and instrumentation designs
- Ultra-low 5 nA maximum input bias current minimizes offset errors in high-impedance sensor interfaces and photodiode transimpedance amplifier circuits
- Rail-to-rail output swing from 2.5 V to 5.5 V single supply enables full-scale ADC driving without headroom loss in 3.3 V and 5 V systems
What is MCP6022-E/SN used for?
The MCP6022-E/SN is well-suited for precision active filters, photodiode amplifiers, and sensor signal conditioning circuits where low bias current of 5 nA and 90 dB CMRR are critical. Its 10 MHz gain-bandwidth product supports audio-band and industrial sensor amplification up to several hundred kilohertz in single-supply 3.3 V or 5 V systems. The dual-amplifier SOIC-8 package reduces BOM count in differential line receivers, ADC input buffers, and portable instrumentation designs.
What are the specifications of MCP6022-E/SN?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOIC-8 |
| Reach Compliance Code | Compliant |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Common-mode Reject Ratio-Min | 74dB |
| Common-mode Reject Ratio-Nom | 90dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 2500 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | NO |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 7V/us |
| Supply Current-Max | 2.7mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 10000 |
| Voltage Gain-Min | 31620 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP6022-E/SN datasheet?
MCP6022-E/SN Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP6022-E/SN?
Compatible alternatives and drop-in replacements for MCP6022-E/SN:
Microchip Technology Inc Dual 2.5V 10 MHz OP, E temp
Microchip Technology Inc Dual 2.5V 10 MHz OP, E temp
Amplifier, 2 Func, 500uV Offset-Max, CMOS, PDSO8
Frequently Asked Questions
What gain-bandwidth product and CMRR does the MCP6022-E/SN provide for active filter designs?
The MCP6022-E/SN offers a 10 MHz gain-bandwidth product and a typical CMRR of 90 dB, with a minimum of 74 dB across supply and temperature variation. This combination supports Sallen-Key low-pass filters with corner frequencies up to several hundred kilohertz while rejecting common-mode noise in industrial 5 V systems.
How does the 5 nA input bias current of MCP6022-E/SN benefit high-impedance sensor interface designs?
With a maximum input bias current of only 5 nA, the MCP6022-E/SN introduces less than 5 mV of input offset error even across source impedances up to 1 MOhm. This makes it suitable for pH electrode buffers, photodiode transimpedance amplifiers, and capacitive humidity sensor readout circuits where bias current introduces systematic gain errors.
What supply voltage range does MCP6022-E/SN support and how does it differ from standard 5 V-only op-amps?
The device operates from 2.5 V to 5.5 V single supply, unlike classic op-amps that require dual ±5 V or ±15 V rails. The rail-to-rail output can swing within 10 mV of either rail at light loads, allowing it to drive a 10-bit or 12-bit ADC to full-scale on a single 3.3 V supply without a negative supply rail.
In what package does the MCP6022-E/SN come and how does the dual-channel configuration save board space?
The MCP6022-E/SN is housed in an SOIC-8 package, measuring 4.9 mm x 3.9 mm with 1.27 mm pitch. Containing 2 independent op-amp channels in one SOIC-8 package instead of two single-channel SOT-23 or SC-70 packages reduces PCB footprint by up to 40% and simplifies routing for differential or two-stage amplifier topologies.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.6170 | $1.62 |
| 2+ | $1.3549 | $2.71 |
| 100+ | $1.3500 | $135.00 |
| 300+ | $1.3400 | $402.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit