MCP6002-E/MS Microchip Integrated Circuit (Small Outline Packages) In Stock
The MCP6002-E/MS is a dual rail-to-rail input/output general-purpose op-amp from Microchip with 60 dB minimum CMRR and 4.5 mV maximum input offset voltage, housed in an 8-pin MSOP package. It is unity-gain stable with internal frequency compensation and operates from 1.8 V to 6.0 V single supply. Available from global distributors with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6002-E/MS Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.3300(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Rail-to-rail input and output operation from 1.8 V to 6.0 V single supply enabling full signal swing in low-voltage sensor interfaces
- 60 dB minimum CMRR with internal unity-gain frequency compensation simplifying stable closed-loop amplifier design without external compensation networks
- Dual op-amp in an 8-pin MSOP package reduces board space and BOM cost for two-channel signal conditioning circuits
Applications
The MCP6002-E/MS is used in battery-powered sensor amplifiers, active filters, and signal conditioning front-ends where rail-to-rail operation from a single 1.8 V to 3.3 V supply is required. Its dual-channel configuration and MSOP package also suit compact instrumentation amplifier circuits, ADC input buffers, and low-side current sensing in portable medical and consumer electronics devices.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | MSOP-8 |
| Factory Lead Time | 6Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 76dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 4500 µV |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | NO |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC8,.11,20 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 0.6V/us |
| Supply Current-Max | 0.34mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 1000 |
| Voltage Gain-Min | 25118.86 |
| Wideband | NO |
| ## MCP6002-E/MS Alternates Showing results | Image |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MCP6002-E/MS:
Microchip Technology Inc Dual 1.8V, 1MHz OP, I temp
suggested
suggested
suggested
suggested
suggested
Frequently Asked Questions
What is the common-mode rejection ratio of the MCP6002-E/MS and why does it matter in a sensor interface?
The MCP6002-E/MS has a minimum CMRR of 60 dB and a typical CMRR of 76 dB. In a sensor interface where the signal source shares a reference with noisy digital circuitry, 60 dB CMRR means the op-amp rejects common-mode noise by a factor of 1000:1, keeping measurement error below 1 mV for common-mode disturbances up to 1 V, which is sufficient for most 12-bit ADC front-ends.
What supply voltage range does the MCP6002-E/MS support, and can it operate directly from a CR2032 coin cell?
The MCP6002-E/MS operates from 1.8 V to 6.0 V single supply, which fully covers a CR2032 coin cell's discharge range of approximately 2.0 V to 3.0 V. This allows the op-amp to function throughout the usable battery life without a boost converter, making it suitable for long-life wireless sensor nodes and medical patch devices powered by a single coin cell.
How does the 4.5 mV maximum input offset voltage of MCP6002-E/MS affect 12-bit ADC measurement accuracy?
For a 12-bit ADC with a 3.3 V reference, 1 LSB equals approximately 0.8 mV. The MCP6002-E/MS 4.5 mV maximum offset corresponds to about 5.6 LSB of fixed DC error, which is acceptable for applications requiring 9-bit to 10-bit effective resolution but may need software offset calibration for true 12-bit accuracy in precision weigh-scale or temperature measurement systems.
What is the advantage of using the dual MCP6002-E/MS over two single op-amps in a two-channel signal chain?
Integrating 2 op-amps in a single 8-pin MSOP package reduces the footprint by roughly 50% compared to two SOT-23-5 single op-amps, and typically lowers total BOM cost by 20% to 30% at production volumes. Both amplifiers share a common supply bypass capacitor and substrate, reducing parasitics and improving channel-to-channel matching, which benefits balanced differential signal conditioning in instrumentation and audio applications.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3754 | $0.38 |
| 4+ | $0.3445 | $1.38 |
| 100+ | $0.3300 | $33.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”