MCP6001UT-E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
The MCP6001UT-E/OT is a single general-purpose rail-to-rail input/output operational amplifier from Microchip operating from 1.8 V to 6 V with 76 dB typical CMRR and 4.5 mV maximum input offset voltage. It comes in a 5-pin SOT-23 package for compact, low-voltage designs. Available in stock worldwide with fast shipping.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6001UT-E/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.2668(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP6001UT-E/OT?
- Rail-to-rail input and output swings on a 1.8 V to 6 V supply, maximizing dynamic range in low-voltage signal conditioning circuits
- 76 dB typical CMRR with 60 dB minimum, providing effective rejection of common-mode interference in sensor amplifier stages
- 5-pin SOT-23 package with 4.5 mV maximum input offset voltage for cost-effective general-purpose amplification in space-constrained designs
What is MCP6001UT-E/OT used for?
The MCP6001UT-E/OT serves as a general-purpose amplifier in portable consumer electronics, IoT edge nodes, and microcontroller-based sensor interfaces requiring a low-cost, single-supply op-amp with rail-to-rail output. Its 1.8 V to 6 V supply range covers both 3.3 V and 5 V digital systems, allowing direct integration without additional level-shifting circuitry. The compact 5-pin SOT-23 package suits wearable devices, smart home sensors, and industrial data loggers where board space and BOM cost must be minimized.
What are the specifications of MCP6001UT-E/OT?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 6Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 76dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 4500 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP5/6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE |
| Packing Method | TAPE AND REEL |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 0.6V/us |
| Supply Current-Max | 0.17mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 1000 |
| Voltage Gain-Min | 25118.86 |
| Wideband | NO |
| ## MCP6001UT-E/OT Alternates Showing results | Image |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP6001UT-E/OT datasheet?
MCP6001UT-E/OT Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP6001UT-E/OT?
Compatible alternatives and drop-in replacements for MCP6001UT-E/OT:
suggested
suggested
Operational Amplifier, 1 Func, 4500uV Offset-Max, CMOS, PDSO5
Frequently Asked Questions
What supply voltage range does MCP6001UT-E/OT support, and how does rail-to-rail output benefit 3.3 V microcontroller designs?
The MCP6001UT-E/OT operates from 1.8 V to 6 V, covering both 3.3 V and 5 V single-supply systems. Its rail-to-rail output swings within a few millivolts of both supply rails, maximizing the usable output range to nearly the full 3.3 V span and improving ADC input utilization when the op-amp directly drives a microcontroller's analog input without a level-shifting buffer.
How does the 4.5 mV maximum input offset voltage of MCP6001UT-E/OT affect accuracy in a general-purpose signal amplification circuit?
A 4.5 mV maximum input offset voltage means the output can deviate by up to 4.5 mV multiplied by the closed-loop gain even with zero differential input. At a gain of 10, this yields a worst-case 45 mV output error, which is acceptable for general-purpose audio, level-detection, or coarse sensor measurement applications but would require offset trimming or a lower-offset part for high-precision 12-bit or 16-bit ADC front-end designs.
In which cost-sensitive IoT designs does MCP6001UT-E/OT offer an advantage over higher-specification op-amps such as the MCP606T?
For IoT applications not requiring ultra-low 25 µA quiescent current or very high CMRR, the MCP6001UT-E/OT provides a lower-cost alternative with adequate 60 dB minimum CMRR and rail-to-rail I/O on a 1.8 V to 6 V supply. It suits general signal buffering, filter stages, or comparator-like threshold detection where the 4.5 mV offset and moderate bias current are within the acceptable error budget, delivering value without over-specifying the amplifier.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3500 | $0.35 |
| 25+ | $0.3166 | $7.92 |
| 100+ | $0.3152 | $31.52 |
| 250+ | $0.3138 | $78.45 |
| 3000+ | $0.2922 | $876.60 |
| 12000+ | $0.2668 | $3201.48 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit