MCP4651-103E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP4651-103E/ST is a dual-channel 8-bit digital potentiometer with 10 kΩ end-to-end resistance and 257 wiper positions, controlled via I2C with non-volatile memory, packaged in a 14-pin TSSOP for programmable gain and calibration circuits.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4651-103E/STSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
14
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.5870(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Dual-channel 8-bit digital potentiometer with 257 wiper positions and 10 kΩ end-to-end resistance for independent two-channel programmable resistance control
  • Non-volatile wiper position storage retaining the last programmed value through power cycles, eliminating re-initialization on every power-up
  • I2C 2-wire serial interface supporting multiple address configurations for multi-device bus sharing in complex analog calibration systems
  • Available in 5 kΩ, 10 kΩ, and 50 kΩ resistor array variants within the MCP4651 family to match diverse impedance requirements

Applications

The MCP4651-103E/ST is designed for dual-channel programmable gain amplifiers, DC offset calibration circuits, and LCD contrast or audio volume controls where non-volatile wiper retention is essential. Its I2C interface and 257-step resolution enable fine trimming of analog signal paths in industrial sensor transmitters and precision instrumentation without mechanical trimmers. The TSSOP-14 package allows placement alongside op-amps and instrumentation amplifiers on compact mixed-signal PCBs.

Specifications

Manufacturer Package CodeTSSOP-14
Reach Compliance CodeCompliant
Factory Lead Time7Weeks
YTEOL9
Additional FeatureTHE RESISTOR ARRAY VALUES ARE 5000 OHM,10000 OHM, 50000 OHM
Bandwidth-Nom2kHz
Control Interface2-WIRE SERIAL
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeR-PDSO-G14
JESD-609 Codee3
Number of Functions1
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP14,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom3V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginPhilippines, Thailand

Datasheet

MCP4651-103E/ST Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many wiper positions does MCP4651-103E/ST offer and what resistance step size does each increment represent across 10 kΩ?

The MCP4651-103E/ST provides 257 wiper positions across its 10 kΩ end-to-end resistance, yielding a nominal step size of approximately 39 Ω per increment, enabling precise programmable resistance adjustments for gain trimming, DC offset calibration, and analog signal conditioning applications.

Does the MCP4651-103E/ST retain its wiper position after a power cycle, and why does that matter for calibration use cases?

Yes, the MCP4651-103E/ST stores wiper positions in on-chip non-volatile memory, so the calibrated resistance setting is retained through power cycling, brownouts, and reset events, eliminating the need for a microcontroller to re-write calibration values every time the system powers on.

In a dual-amplifier gain stage, how does MCP4651-103E/ST enable independent control of two channels from a single I2C address?

The MCP4651-103E/ST contains 2 independent potentiometer channels each with its own 8-bit wiper register accessible via distinct register addresses over the shared I2C bus, allowing a microcontroller to set different resistance values on each channel in separate write transactions without requiring two separate ICs or additional chip-select lines.

How does the 2 kHz bandwidth of MCP4651-103E/ST restrict its use in audio or high-frequency signal path applications?

With a nominal bandwidth of 2 kHz, the MCP4651-103E/ST is best suited for DC to low-frequency applications such as bias trimming, volume control at low audio rates, and slow calibration loops; for wideband audio above 2 kHz or RF signal attenuation, a dedicated audio-grade or high-bandwidth digital potentiometer with MHz-range bandwidth would be required.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.5870
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.5870$0.59
pcs
Unit price: $0.5870 · Total: $0.59

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea