Microchip

MCP42100-I/SL is a dual-channel 100 kΩ digital potentiometer with 256 wiper positions per channel, controlled via a 3-wire SPI-compatible serial interface in a 14-pin SOIC package. Each channel provides precise electronically adjustable resistance for gain, bias, and calibration control. Designed for programmable analog front ends, audio volume control, and sensor calibration systems.

Microchip MCP4142-502E/SN is a single-channel 5 kΩ digital potentiometer with SPI increment/decrement control interface in an SOIC-8 package. Provides 128 wiper positions, 2 kHz nominal bandwidth, and non-volatile wiper memory for reliable power-cycle retention. Available in stock with worldwide shipping.

The MCP23S09-E/SO is an 8-bit SPI I/O expander from Microchip, offering 8 bidirectional I/O lines with a maximum SPI clock of 10 MHz in an 18-pin SOIC package. It extends microcontroller GPIO capacity with configurable interrupts and pull-up resistors. Available worldwide with fast delivery.

MCP42100-E/SL is a dual-channel 100 kΩ digital potentiometer from Microchip with 256-position 8-bit resolution and 3-wire SPI control in an SOIC-14 package. From $1.50 in stock with worldwide shipping.

MCP42010-E/SL is a dual-channel, 10 kΩ, 256-position digital potentiometer with a 3-wire SPI interface, packaged in a 14-pin SOIC. It enables precise digitally controlled resistance adjustment for gain, offset, and calibration circuits in embedded systems.

The MCP3304-CI/SL is a 13-bit successive approximation ADC with 4 differential input channels and a ±5 V analog input range in a 16-pin SOIC package. Features 6.19 µs maximum conversion time for medium-speed data acquisition applications. Available from stock with worldwide shipping.

The MCP4162-503E/SN is a single-channel digital potentiometer from Microchip with 256 wiper steps and a 50 kΩ end-to-end resistance. It uses an increment/decrement control interface and is housed in an 8-pin SOIC package for straightforward PCB integration. Suited for DC gain control, offset trimming, and calibration applications requiring fine-grained resistance adjustment.

MCP4162-502E/SN is a single-channel 8-bit digital potentiometer from Microchip with a 5 kΩ end-to-end resistance and SPI increment/decrement interface. It offers 256 wiper positions, 2 kHz bandwidth, and operates from 1.8 V to 5.5 V, housed in an 8-pin SOIC package for audio, calibration, and sensor-trim applications.

Microchip MCP4152-503E/SN is a single-channel 50 kΩ digital potentiometer with SPI increment/decrement control and 200 Hz bandwidth in an 8-pin SOIC package. It replaces mechanical pots in gain, offset, and calibration circuits. Available from stock with worldwide shipping.

Microchip MCP4162-104E/SN is a single-channel 256-step digital potentiometer with 100 kOhm end-to-end resistance, controlled via SPI increment/decrement interface. It operates in an 8-pin SOIC package with RoHS compliance. Available for worldwide shipping with reliable lead times.

PLASTIC, MSOP-8

The MCP4152-502E/SN is a single-channel 5 kΩ SPI digital potentiometer from Microchip Technology with 256 wiper positions and an increment/decrement control interface. It operates over 1.8 V to 5.5 V and fits in a compact SOIC-8 package for analog adjustment in embedded designs.

Microchip MCP4141-104E/SN is a single-channel SPI digital potentiometer with 128 steps and 100 kOhm end-to-end resistance in an SOIC-8 package. Supports non-volatile wiper memory and increment/decrement control. Available from stock with worldwide shipping.

The MCP41050-E/SN is a single-channel SPI digital potentiometer with 256 resistance steps and a 50 kΩ end-to-end resistance in an 8-pin SOIC package. It uses a 3-wire SPI serial interface and operates with a 0.28 kHz nominal bandwidth, enabling precise software-controlled resistance adjustment. Available from stock with Pb-free RoHS-compliant construction and worldwide shipping.

Microchip MCP4161 is a single-channel 7-bit non-volatile digital potentiometer with 10 kOhm resistance and increment/decrement interface in an 8-pin SOIC package. It provides 128-step wiper control with EEPROM position retention. Available in stock worldwide with fast shipping.

Microchip MCP4151-502E/SN is a single-channel SPI digital potentiometer with 5 kΩ end-to-end resistance and 256-position wiper control in an SOIC-8 package. It features increment/decrement SPI interface with 2 kHz bandwidth for dynamic resistance adjustment. Available from stock with worldwide shipping.

Microchip MCP4142-103E/SN is a single-channel SPI digital potentiometer with 128-step resolution and 10 kOhm end-to-end resistance operating at up to 1 kHz bandwidth. It supports increment/decrement control with non-volatile wiper storage in an 8-pin SOIC package. Available in stock from authorized distributors with worldwide shipping.

MCP4152-103E/SN is a single-channel, 256-step SPI digital potentiometer with 10 kOhm end-to-end resistance from Microchip in an SOIC-8 package. It uses an increment/decrement control interface with 1 kHz nominal bandwidth and is RoHS-compliant (Pb-free). Available from stock worldwide with fast shipping.

Microchip MCP4018T-502E/LT is a single-channel 50 kΩ 7-bit I2C digital potentiometer with 128 wiper positions in a SOT-23-6 package, featuring 2 kHz bandwidth. Available from stock with worldwide shipping.

The MCP4022T-202E/CH is a single-channel, 64-step digital potentiometer from Microchip with 2.1 kΩ end-to-end resistance and non-volatile memory in a SOT-23-6 package. It features an INCREMENT/DECREMENT interface and 4 kHz bandwidth for precise analog adjustment. From $0.55 in stock with worldwide shipping.

Digital Potentiometer 64 Step 10kOhm

Microchip MCP4132 is a single-channel SPI digital potentiometer with 128 steps and a 5 kOhm end-to-end resistance, offering volatile wiper storage and up/down increment control in an SOIC-8 package. Ideal for gain and offset trimming applications.

Microchip MCP4141-503E/SN is a single-channel SPI digital potentiometer with 128 wiper positions and a 50 kOhm end-to-end resistance in a SOIC-8 package. It supports volatile wiper position storage and operates from 1.8 V to 5.5 V supply. Available from stock worldwide with fast shipping.

The MCP4132-103E/SN is a single-channel digital potentiometer from Microchip Technology with 128 wiper positions and 10 kΩ end-to-end resistance. It is controlled via an SPI increment/decrement interface and housed in a standard 8-pin SOIC package. Lead-free and widely available for volume production in gain control, offset adjustment, and programmable analog circuits.

The MCP4151-104E/SN is a single-channel, 8-bit digital potentiometer with SPI interface in SOIC-8 package. It features 256 wiper positions, 100 kΩ end-to-end resistance, and operates from 1.8 V to 5.5 V supply voltage. From $0.60 in stock with worldwide shipping.

Microchip MCP4151-103E/SN is a single-channel 10 kOhm digital potentiometer in SOIC-8 package with SPI-compatible increment/decrement interface. Provides 256-position wiper resolution and operates from 1.8 V to 5.5 V. Available from stock worldwide with fast shipping.

Microchip MCP4142-104E/SN is a single-channel 100 kΩ digital potentiometer with SPI increment/decrement control interface, 0.1 kHz bandwidth, and non-volatile wiper position storage in a RoHS-compliant 8-pin SOIC package. From $1.50 in stock worldwide shipping.

Microchip MCP4141-502E/SN is a single-channel 128-step 5 kOhm digital potentiometer with SPI increment/decrement control, non-volatile wiper position storage, and 2 kHz bandwidth in an 8-pin SOIC package. In stock worldwide with fast shipping.

Microchip MCP4021-502E/MS is a single-channel non-volatile digital potentiometer with 5 kΩ end-to-end resistance, 64 wiper steps, and 2 kHz bandwidth in an MSOP-8 package. It uses an increment/decrement control interface and retains the last wiper position through power cycles. Available from stock with worldwide shipping.

Microchip MCP3302-CI/SL is a 13-bit differential ADC with 2 channels in a 14-pin SOIC package. Features successive approximation conversion at up to 5V analog input range. Available from stock worldwide with fast shipping.

The MCP3909-I/SS is a 2-channel energy meter IC from Microchip with SPI interface, housed in an SSOP-24 package. It integrates analog front-end circuitry for precise AC energy measurement and is RoHS compliant for use in smart metering applications.

Microchip MCP41100-E/SN is a single-channel 100kΩ SPI digital potentiometer with 256 positions in an 8-pin SOIC package. Features 3-wire SPI interface and operates from 2.7 V to 5.5 V supply. Available from stock with worldwide shipping.

Microchip MCP2155-I/SS is an IrDA protocol handler and bit encoder IC in 20-pin SSOP package, providing full IrDA SIR, MIR, and FIR protocol management up to 4 Mbps. It offloads infrared communication framing from the host MCU with minimal external components. Available from stock worldwide with competitive pricing.

Microchip MCP41010-E/SN is a single-channel digital potentiometer with 10 kΩ end-to-end resistance and 3-wire SPI interface in an SOIC-8 package. It provides 256 wiper positions and 1 kHz bandwidth for analog signal control. Available from stock with worldwide shipping.

The MCP40D19T-103E/LT is a single-channel 7-bit digital potentiometer from Microchip with a 10 kΩ end-to-end resistance, controlled via I2C (2-wire serial) interface. It is housed in a tiny SC70-5 (SOT23) package with 128 wiper positions for precise resistance adjustment. Ideal for gain control, offset trimming, and calibration circuits in space-constrained embedded designs.

MCP4024T-202E/OT is a single-channel, non-volatile digital potentiometer from Microchip with 64 wiper positions and a 2.1 kOhm end-to-end resistance. It uses an increment/decrement control interface with a 4 kHz bandwidth and stores the wiper setting in non-volatile memory. Housed in a miniature 5-pin SOT-23 package for space-sensitive PCB designs.

The MCP4021-503E/MS is a 50 kΩ single-channel digital potentiometer from Microchip with 64 resistor taps, non-volatile memory, and an increment/decrement serial interface in an 8-pin MSOP package. It stores the wiper position in EEPROM so settings survive power cycles. Suitable for programmable gain, offset, and calibration circuits in industrial and consumer designs.

MCP40D19T-503E/LT is a single-channel 7-bit digital potentiometer from Microchip with 50 kΩ end-to-end resistance and I2C (2-wire serial) interface in a tiny 5-pin SC70 package. It targets programmable gain, voltage adjustment, and calibration circuits in compact battery-powered and portable electronic designs.

Microchip MCP4017T-502E/LT is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 6 pins, 7-bit, 2°C in SOT23 (6-Pin). From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

MCP40D18T-103E/LT is a 7-bit I2C digital potentiometer from Microchip with a 10 kΩ end-to-end resistance and 128 wiper positions. It supports a 2-wire I2C serial interface for microcontroller-programmable resistance adjustment and is packaged in a compact 6-pin SOT-23 for space-constrained applications.

Microchip MCP40D18T-502E/LT is a single-channel 7-bit I2C digital potentiometer with 50 kΩ end-to-end resistance, 128 steps, and a 2 kHz bandwidth in a compact SOT-23-6 package. It enables software-controlled resistance adjustment for gain, offset, and calibration circuits. Available worldwide with fast shipping.

Microchip MCP40D17T-103E/LT is a single-channel 7-bit digital potentiometer with 10 kΩ end-to-end resistance and 128 positions, controlled via I2C 2-wire serial interface, in a compact 6-pin SOT-23 package for programmable gain and bias adjustment.

Microchip MCP4019T-103E/LT is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 5 pins, 7-bit, 2°C in SOT23 (5-Pin). From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

MCP40D17T-502E/LT is a single-channel 7-bit I2C digital potentiometer from Microchip with 5 kΩ end-to-end resistance, 128 wiper positions, and 2 kHz bandwidth in a 6-pin SOT-23 package. It enables software-controlled analog tuning for bias, gain, and offset adjustment in compact embedded designs.

Microchip MCP4011-502E/MS is a single-channel digital potentiometer with 64 resistive steps and a 5 kOhm end-to-end resistance, controlled via an increment/decrement interface in a compact 8-pin MSOP package. It offers 2 kHz nominal bandwidth for analog signal path adjustment applications. Available from stock with worldwide shipping.

The MCP3204-CI/SL is a 12-bit, 4-channel successive approximation ADC from Microchip with SPI interface, housed in a 14-pin SOIC package. It accepts analog input voltages up to 5 V, converts in as little as 6 µs, and achieves a linearity error of less than 0.05%. Ideal for multi-channel sensor data acquisition, industrial monitoring, and battery measurement systems.

The MCP4021-202E/SN is a single-channel non-volatile digital potentiometer from Microchip with 64 resistance steps and a 2.1 kΩ end-to-end resistance. It uses an increment/decrement control interface and retains its wiper position in non-volatile memory through power cycles. Housed in an 8-pin SOIC package for easy PCB integration in calibration and adjustment circuits.

Microchip MCP3428 is a 16-bit delta-sigma ADC with 4 differential input channels, programmable gain amplifier up to 8x, and I2C interface. Available in TSSOP-14 package, RoHS compliant, in stock with worldwide shipping.

Microchip MCP4021-202E/MS is a single-channel 7-bit digital potentiometer with 2.1 kOhm end-to-end resistance, 64 wiper steps, and nonvolatile memory in an MSOP-8 package. Controlled via Up/Down interface. Available from stock worldwide.

MCP3221A5T-E/OT is a 12-bit successive approximation ADC from Microchip with I2C interface, 22 ksps sampling rate, and 5 V analog input support. Available in a tiny SOT-23-5 package for compact sensor designs.