MCP6001RT-I/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
Microchip MCP6001RT-I/OT is a single rail-to-rail input/output operational amplifier with 1 MHz gain-bandwidth product, operating from a 1.8 V to 6 V supply with a 60 dB minimum CMRR. It features a 600 µA maximum supply current and a 4500 µV maximum input offset voltage in a SOT-23-5 package. Available worldwide from authorized distributors.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6001RT-I/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.1860(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP6001RT-I/OT?
- 1 MHz gain-bandwidth product with rail-to-rail input and output swing, suitable for 1.8 V single-supply signal chains
- 60 dB minimum CMRR with 76 dB typical, providing good common-mode noise rejection in sensor amplifier stages
- 600 µA maximum supply current in a tiny SOT-23-5 package, optimized for space- and power-constrained portable designs
What is MCP6001RT-I/OT used for?
The MCP6001RT-I/OT is ideal for low-power sensor signal conditioning in battery-operated devices such as portable medical monitors, IoT sensor nodes, and wearable electronics where the 1.8 V rail is the system supply. Its rail-to-rail output maximizes dynamic range in single-supply ADC front-end circuits driving 10-bit or 12-bit converters. The SOT-23-5 footprint suits compact handheld instruments and hearing aids where PCB space is at a premium.
What are the specifications of MCP6001RT-I/OT?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 6Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 76dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 4500 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP5/6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE |
| Packing Method | TAPE AND REEL |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 0.6V/us |
| Supply Current-Max | 0.17mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 1000 |
| Voltage Gain-Min | 25118.86 |
| Wideband | NO |
| ## MCP6001RT-I/OT Alternates Showing results | Image |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP6001RT-I/OT datasheet?
MCP6001RT-I/OT Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP6001RT-I/OT?
Compatible alternatives and drop-in replacements for MCP6001RT-I/OT:
Frequently Asked Questions
What is the gain-bandwidth product of MCP6001RT-I/OT and how does it affect signal bandwidth at a gain of 10?
The MCP6001RT-I/OT has a 1 MHz gain-bandwidth product (GBW). At a closed-loop gain of 10 V/V, the resulting -3 dB signal bandwidth is approximately 100 kHz, which is adequate for audio-band and low-frequency sensor signals such as thermistor bridges or strain gauges operating below 10 kHz. For higher-bandwidth applications above 200 kHz, the MCP6021 (10 MHz GBW) in the same package is a drop-in alternative.
Can MCP6001RT-I/OT be powered directly from a single 1.8 V LDO rail in an IoT design?
Yes, the MCP6001RT-I/OT operates from a single supply as low as 1.8 V, making it directly compatible with 1.8 V LDO rails common in low-power IoT microcontrollers. The rail-to-rail output swings within a few millivolts of both supply rails, maximizing the usable ADC input range on 10-bit or 12-bit converters. Supply current is typically below 100 µA, contributing minimally to total system power budget.
How does the 4500 µV maximum input offset voltage affect DC precision in a temperature sensor circuit?
A 4500 µV maximum input offset at unity gain translates to up to 4.5 mV of DC error at the output, which at a typical thermocouple sensitivity of 41 µV/°C corresponds to a temperature error of roughly 110°C without correction. For precision DC measurement, auto-zero op-amps like the MCP6V01 (max 10 µV offset) in a similar SOT-23-5 package are recommended instead, while MCP6001RT-I/OT is better suited for AC-coupled or gain-trimmed applications.
What is the maximum continuous output current the MCP6001RT-I/OT can source into a load resistor?
The MCP6001RT-I/OT can source or sink approximately 23 mA short-circuit current at 5 V supply, and is specified to drive loads down to 2 kΩ while maintaining rail-to-rail output swing within 100 mV of the supply rails. For resistive loads below 1 kΩ, output swing reduces noticeably; buffer stages or a higher-drive part like the MCP6001 in a 1 kΩ drive scenario should be validated against the datasheet output saturation curves.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.2850 | $0.28 |
| 10+ | $0.2630 | $2.63 |
| 25+ | $0.2400 | $6.00 |
| 100+ | $0.2200 | $22.00 |
| 12000+ | $0.1871 | $2245.20 |
| 27000+ | $0.1860 | $5022.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit