MCP601-I/ST Microchip Integrated Circuit (Small Outline Packages) In Stock
The MCP601-I/ST is a single rail-to-rail output operational amplifier from Microchip operating from 2.7 V with an ultra-low bias current of 60 fA and a minimum CMRR of 75 dB. It features voltage-feedback architecture with internal frequency compensation in an 8-lead TSSOP package. Available from stock worldwide.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP601-I/ST Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.4300(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP601-I/ST?
- Ultra-low input bias current of 60 fA maximum enables accurate signal conditioning of high-impedance sensor outputs
- Rail-to-rail output swing maximizes dynamic range on low single-supply voltages down to 2.7 V
- Minimum 75 dB CMRR (typically 90 dB) rejects common-mode interference in noise-sensitive measurement circuits
- Internally frequency-compensated voltage-feedback architecture eliminates external compensation components
What is MCP601-I/ST used for?
The MCP601-I/ST is used in portable and battery-powered measurement instruments to amplify low-level signals from high-impedance sensors such as pH probes, photodiodes, and piezoelectric transducers, where its 60 fA bias current minimizes loading errors. It is well suited for single-supply active filter stages and precision signal-conditioning circuits in industrial sensor modules operating from 2.7 V to 6 V. Medical monitoring devices and data acquisition front-ends also leverage its 90 dB typical CMRR and rail-to-rail output to achieve clean signal amplification with minimal distortion.
What are the specifications of MCP601-I/ST?
| Pbfree Code | Yes |
| Manufacturer Package Code | TSSOP-8 |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.00006 µA |
| Common-mode Reject Ratio-Min | 75dB |
| Common-mode Reject Ratio-Nom | 90dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 3000 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 2.3V/us |
| Supply Current-Max | 0.325mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 2800 |
| Voltage Gain-Min | 56200 |
| Wideband | NO |
| ## MCP601-I/ST Alternates Showing results | Image |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia, Philippines, Thailand |
Where can I find the MCP601-I/ST datasheet?
MCP601-I/ST Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP601-I/ST?
Compatible alternatives and drop-in replacements for MCP601-I/ST:
suggested
suggested
suggested
suggested
suggested
Frequently Asked Questions
How low is the input bias current of the MCP601-I/ST and which sensor types benefit most from this specification?
The MCP601-I/ST has a maximum average input bias current of just 0.00006 µA (60 fA), making it ideal for high-impedance sensors such as pH electrodes, ISFET sensors, and piezoelectric transducers where even picoampere-level bias currents would cause measurable voltage errors across the source impedance.
What is the CMRR performance of the MCP601-I/ST and how does it benefit low-level differential signal amplification?
The MCP601-I/ST achieves a minimum CMRR of 75 dB and a typical CMRR of 90 dB, which means common-mode interference on a 2.7 V supply is attenuated by a factor of at least 5600:1; this level of rejection is sufficient for amplifying millivolt-level differential signals from bridge sensors and thermocouples in electrically noisy industrial environments.
For a single 3.3 V supply rail, how does the MCP601-I/ST maximize the usable output voltage range?
With its rail-to-rail output stage, the MCP601-I/ST swings to within a few millivolts of both GND and 3.3 V, providing nearly the full 3.3 V dynamic range for driving ADC inputs; this is especially important for 12-bit or 16-bit ADCs where losing even 100 mV of headroom reduces effective resolution by roughly half a bit.
When should a designer choose the MCP601-I/ST over a dual or quad op-amp package for a compact sensor node design?
A designer should choose the MCP601-I/ST in single-channel sensor nodes where one amplifier stage per acquisition path is needed and the TSSOP-8 package's approximately 3 mm x 4.4 mm footprint is a better fit than a dual or quad package that would occupy more area than necessary, particularly when independent power gating or channel isolation is required per path.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.5700 | $0.57 |
| 25+ | $0.4700 | $11.75 |
| 100+ | $0.4300 | $43.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit