Microchip

MCP6231UT-E/LT is a single-channel general-purpose operational amplifier with rail-to-rail input and output, operating from 1.8V to 6V supply. It features an ultra-low input bias current of 1.1 pA maximum and 75 dB typical CMRR in a 5-pin SC70 package. Available from stock worldwide with fast shipping.

Microchip MCP617-I/SN is a dual PNP-input operational amplifier operating from a 2.3 V single supply with 100 dB typical CMRR. It features 5 nA maximum input bias current and a voltage-feedback architecture optimized for low-power sensor interfaces. Available in the standard SOIC-8 package.

Microchip MCP1652S-E/MS is a current-mode PWM boost switching controller operating at 750 kHz with an input voltage range of 2.7 V to 5.5 V, housed in an 8-pin MSOP package. It provides a compact solution for boosting single-cell Li-ion or 3.3 V rail voltages to higher output levels. Available from stock worldwide with fast shipping.

MCP6242-E/SN is a dual voltage-feedback op-amp operating from 1.8 V supply with 650 kHz gain-bandwidth product and rail-to-rail output in an 8-pin SOIC package, ideal for low-power sensor signal conditioning and battery-powered applications. From $0.65, in stock, worldwide shipping.

MCP622-E/SN is a dual 20 MHz auto-zero operational amplifier from Microchip with 0.005 µA maximum bias current and 84 dB typical CMRR, designed for extended temperature operation. Voltage-feedback architecture in an 8-pin SOIC package suits precision signal conditioning. Available from stock with worldwide shipping.

MCP6232-E/MS is a operational amplifier IC by Microchip. Key specs: SOIC package, 8 pins, -40°C to 125°C. From inquiry pricing, in stock with worldwide shipping.

MCP6241UT-E/LT is a single general-purpose rail-to-rail input/output CMOS op amp from Microchip operating on supply voltages up to 5.5 V with 60 dB minimum CMRR in a tiny SC70-5 package. It delivers 7 mV maximum input offset voltage for cost-sensitive signal conditioning. Available from stock worldwide with fast shipping.

Microchip MCP6144-I/ST is a quad rail-to-rail op-amp with 1.6 V minimum supply, 100 kHz gain-bandwidth product, and 5 nA maximum bias current. Features 80 dB typical CMRR and voltage-feedback architecture in TSSOP-14. Available worldwide with fast shipping.

MCP6241RT-E/OT is a single general-purpose rail-to-rail I/O op-amp from Microchip operating from 1.8 V to 5.5 V with 75 dB typical CMRR and 60 dB minimum. Available in a compact SOT-23-5 package for portable analog circuit designs.

The MCP621-E/SN is a single-channel, low-power operational amplifier with 200 µV maximum input offset voltage, 84 dB typical CMRR, and a voltage-feedback architecture in an SOIC-8 package. It delivers precision signal amplification with rail-to-rail output for sensor interface and instrumentation applications. From $0.85 in stock worldwide shipping.

MCP6241-E/MS is a integrated circuit for board-level control by Microchip. Key specs: SOIC package, 8 pins, -40°C to 125°C. From inquiry pricing, in stock with worldwide shipping.

The MCP6052-E/SN is a dual rail-to-rail operational amplifier from Microchip operating from a single 1.8 V supply with 300 kHz gain-bandwidth product and ultralow 0.1 nA input bias current. It offers 74 dB minimum CMRR and voltage-feedback architecture in an SOIC-8 package for low-power analog signal processing. Suitable for portable medical devices, sensor interfaces, and battery-powered instrumentation requiring E-grade extended temperature operation.

The MCP6234-E/SL is a quad 200 kHz operational amplifier rated for 1.8 V operation from Microchip Technology. It features a voltage-feedback architecture, 75 dB common-mode rejection ratio, and an ultra-low 0.0011 µA bias current in a 14-pin SOIC package. Well suited for battery-powered sensor conditioning, active filtering, and portable instrumentation requiring four independent op-amp channels.

MCP6231UT-E/OT is a integrated circuit for board-level control by Microchip. Key specs: SOT23 (5-Pin), 5 pins, -40°C to 125°C. From inquiry pricing, in stock with worldwide shipping.

Microchip MCP6054-E/ST is a quad low-power operational amplifier with 300 kHz gain-bandwidth, 1.8 V to 6 V single-supply operation, and 91 dB typical CMRR in a TSSOP-14 package. Targets battery-powered sensor and filtering applications. Available from stock with worldwide shipping.

MCP4531-103E/MS is a single-channel 7-bit I2C digital potentiometer from Microchip with a 10 kΩ end-to-end resistance, 128 wiper positions, and 2 kHz bandwidth in an 8-pin MSOP package. It enables software-controlled analog adjustment for gain, offset, and bias tuning in embedded systems.

MCP4632-502E/UN is a single-channel digital potentiometer from Microchip with a 5 kΩ end-to-end resistance and 2-wire I2C interface, housed in a MSOP-10 package. It provides programmable resistance adjustment at up to 2 kHz bandwidth for analog signal conditioning and calibration circuits.

The MCP6231T-E/OT is a single general-purpose rail-to-rail input/output operational amplifier from Microchip, operating on supply voltages up to 6 V. It features a voltage-feedback architecture with a maximum input bias current of 1.1 nA and a common-mode rejection ratio of 75 dB typical, housed in a compact 5-pin SOT-23 package for space-constrained designs.

Microchip MCP608-I/ST is a single-channel operational amplifier with 25 µA supply current and a 2.5 V minimum supply, housed in an 8-pin TSSOP package. It features 91 dB typical CMRR and voltage-feedback architecture for precision low-power signal conditioning. Available from stock with worldwide shipping.

MCP607-I/ST is a integrated circuit for board-level control by Microchip. Key specs: SOIC package, 8 pins, -40°C to 85°C. From inquiry pricing, in stock with worldwide shipping.

Microchip MCP6231RT-E/OT is a single general-purpose rail-to-rail input/output op-amp with a 6 V maximum supply and 75 dB typical CMRR, housed in a compact 5-pin SOT-23 package for space-constrained analog designs. From $0.40 in stock worldwide shipping.

The MCP619-I/ST is a quad rail-to-rail operational amplifier from Microchip, operating from a 2.3 V to 5.5 V single supply with PNP input architecture. It features a common-mode rejection ratio of 100 dB typical and a bias current of just 5 nA, housed in a 14-pin TSSOP package for compact signal-conditioning designs.

MCP6143T-E/CH by Microchip is a single, low-power operational amplifier operating from 1.6 V to 5.5 V with 100 kHz gain-bandwidth product and rail-to-rail output in a 6-pin SOT-23 package. It features a maximum input bias current of 5 pA and 80 dB typical CMRR, ideal for battery-powered sensor conditioning circuits. Available worldwide with fast shipping from authorized distributors.

Microchip MCP6071-E/SN is a single-channel precision operational amplifier with 1.2 MHz bandwidth and 0.5 µV/°C offset drift in SOIC-8 package. Features 74 dB minimum CMRR, 0.0001 µA bias current at 25°C, and rail-to-rail output. Available in stock with worldwide shipping at competitive pricing.

The MCP616-I/SN is a single-supply operational amplifier from Microchip featuring ultra-low 5 nA input bias current and 100 dB typical CMRR in an 8-pin SOIC package. Its voltage-feedback architecture suits precision signal conditioning and sensor interface circuits. Available in stock worldwide with fast shipping.

MCP40D19T-502E/LT is a single-channel 5 kΩ, 7-bit digital potentiometer from Microchip Technology, controlled via I2C 2-wire serial interface. It offers 128 wiper positions and operates from a single supply rail, packaged in a compact SOT-23-5 footprint. From $0.80, in stock, worldwide shipping.

The MCP606-I/SN is a single rail-to-rail output operational amplifier from Microchip with only 25 µA supply current, a 2.5 V minimum supply voltage, and 91 dB typical CMRR. It features 80 pA maximum input bias current and is housed in an SOIC-8 package for surface-mount assembly. Designed for battery-powered sensors, portable instrumentation, and low-power active filter stages in consumer and industrial equipment.

Microchip MCP6142-I/SN is a dual channel op-amp operating from 1.6 V supply with 100 kHz gain-bandwidth product and 0.005 µA max bias current in an 8-pin SOIC package. Its ultra-low supply voltage and nanoamp input bias suit battery-powered sensor signal conditioning. Available in stock with worldwide shipping.

The MCP6064-E/ST is a quad 1.8 V operational amplifier from Microchip featuring 600 kHz gain-bandwidth product, 0.1 nA typical input bias current, 74 dB minimum CMRR, and rail-to-rail input/output in a 14-pin TSSOP package, suitable for precision sensor signal conditioning and battery-powered portable instrumentation.

MCP6141-I/SN is a integrated circuit for board-level control by Microchip. Key specs: SOIC package, 8 pins, -40°C to 85°C. From inquiry pricing, in stock with worldwide shipping.

The MCP606T-I/OT is a single low-power operational amplifier from Microchip drawing only 25 µA supply current with a 2.5 V minimum supply and 91 dB typical CMRR. It features rail-to-rail output and comes in a compact 5-pin SOT-23 package. Available in stock worldwide with 1-week lead time and fast shipping.

Microchip MCP6141T-E/OT is a single-channel ultra-low bias current operational amplifier with 5 nA maximum input bias current and 80 dB typical CMRR in a SOT-23-5 package. Voltage-feedback architecture with frequency compensation suits high-impedance sensor amplification from a low-voltage supply. Available in stock worldwide with fast shipping.

The MCP609-I/SL is a quad low-power operational amplifier from Microchip featuring 25 µA supply current per amplifier and 2.5 V single-supply operation in a 14-pin SOIC package. With 75 dB minimum CMRR, internal frequency compensation, and ultralow bias current, it suits precision analog signal conditioning in battery-powered applications.

Microchip MCP6141-I/MS is a single-channel, voltage-feedback operational amplifier with a 1.6 V minimum supply voltage, 100 kHz gain-bandwidth product, and 5 nA maximum input bias current, housed in an 8-pin MSOP package. It features rail-to-rail input and output for maximum dynamic range at low supply voltages. Available from stock worldwide with fast shipping.

Microchip MCP609-I/ST is a quad low-power operational amplifier with 25 µA maximum supply current per amplifier and 2.5V minimum supply in a 14-pin TSSOP package. Features 80 nA maximum bias current and 75 dB minimum CMRR. Available from stock with worldwide shipping.

Microchip MCP608-I/SN is a single low-power operational amplifier with 25 µA supply current, 2.5 V minimum supply, 91 dB typical CMRR, and chip select in SOIC-8 package. RoHS lead-free compliant. Available from stock with worldwide shipping.

MCP607-I/SN is a dual low-power operational amplifier from Microchip with 25 µA supply current per amplifier, 2.5 V single-supply operation, and 91 dB typical CMRR. Packaged in an SOIC-8, it suits portable sensing, signal conditioning, and battery-powered analog circuits.

The MCP6061T-E/MNY is a single-channel voltage-feedback operational amplifier from Microchip, operating at 1.8V supply with a 600 kHz gain-bandwidth product and ultra-low 0.0001 µA input bias current at 25°C. Housed in a compact TDFN-8 package, it targets low-power sensor signal conditioning and filtering applications.

MCP6024-I/SL is a quad rail-to-rail input/output operational amplifier from Microchip with 90 dB typical CMRR and 0.00015 µA maximum bias current in a SOIC-14 package. It features voltage-feedback architecture with internal frequency compensation and RoHS-compliant Pb-free construction. Available from stock worldwide with fast shipping.

MCP6051-E/SN is a 8 pins amplifier by Microchip. Key specs: 8 pins, Small Outline Packages package, Single 1.8V 300kHz Op Amp, E temp. From quote-based sourcing, in stock checks support worldwide shipping.

Microchip MCP23S18-E/SO is a 16-bit SPI I/O expander in SOIC-28 package with 10 MHz bus speed, 2 independently configurable 8-bit ports, and interrupt outputs. Available from stock with worldwide shipping.

Microchip MCP6072-E/SN is a dual operational amplifier featuring 1.2 MHz gain-bandwidth product and 1.8 V minimum supply, with ultra-low 0.1 nA input bias current and 91 dB CMRR. Housed in an 8-pin SOIC package suitable for precision signal conditioning. Available for worldwide shipping.

MCP6044-I/ST is a 14 pins integrated circuit by Microchip. Key specs: 14 pins, Small Outline Packages package, Quad 1.6V 14KHz OpAmp,MCP6044-I/ST. From quote-based sourcing, in stock checks support worldwide shipping.

The MCP606-I/ST is a single low-power operational amplifier from Microchip with only 25 µA supply current and 2.5 V minimum operating voltage in an 8-pin TSSOP package. It features a 91 dB typical common-mode rejection ratio and internal frequency compensation. Ideal for battery-powered sensor interfaces, portable instruments, and low-power analog signal conditioning.

The MCP6044-E/ST is a quad general-purpose rail-to-rail input/output op-amp from Microchip, operating from a single 1.4 V to 6 V supply in a 14-pin TSSOP package. Available in stock with worldwide shipping.

MCP6061-E/SN is a 8 pins amplifier by Microchip. Key specs: 8 pins, Small Outline Packages package, Single 1.8V 600kHz Op Amp, E temp. From quote-based sourcing, in stock checks support worldwide shipping.

MCP6062-E/SN is a 8 pins amplifier by Microchip. Key specs: 8 pins, Small Outline Packages package, Dual 1.8V 600kHz Op Amp, E temp. From quote-based sourcing, in stock checks support worldwide shipping.

MCP6064-E/SL is a quad rail-to-rail operational amplifier from Microchip operating from 1.8 V to 6 V with a 600 kHz gain-bandwidth product. It features ultralow 100 fA input bias current and 91 dB CMRR typical in a 14-pin SOIC package.

The MCP6022 is a dual general-purpose rail-to-rail input/output operational amplifier with 5.5V maximum supply in a TSSOP-8 package. It features 74 dB minimum CMRR, 0.005 µA bias current, and internal frequency compensation for stable single-supply signal conditioning. Available from authorized distributors with worldwide shipping.

Microchip MCP604-I/ST is a quad operational amplifier in a 14-pin TSSOP package with 2.7 V minimum supply, 90 dB typical CMRR, and 60 nA maximum bias current. Internal frequency compensation ensures stability in unity-gain configurations. Available from stock with worldwide shipping.