Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 20,151–20,200 of 41,509
The SN74HC4060DRE4 is a 14-stage asynchronous binary ripple counter with integrated oscillator operating up to 22 MHz from a 2 V to 6 V supply. It provides 10 accessible output taps for sub-divided clock generation and includes a master reset input in a 16-pin SOIC package. Available from authorized distributors with worldwide shipping.
CD4060BF is a 14-bit binary ripple-up counter with built-in oscillator from Texas Instruments in a 16-pin ceramic DIP package. Outputs from 10 counter stages are accessible and the device supports 50 pF load capacitance. Available in stock with worldwide shipping.
IC MULT-FUNC GATE CONFIG SOT23-6
Voltage References 2.5V 100ppm/DegC 50uA SOT23-3 Series
OPA2673IRGVTG4 is a dual high-output-current voltage-feedback op-amp with ±6.5 V supply, 56 dB CMRR typical, and frequency compensation in a 16-pin VQFN EP package. Available from Texas Instruments with worldwide shipping.
Voltage References 4.096-V Precision Mcrpwr Shunt .5% acc
Texas Instruments SN74LS48N is a BCD-to-seven-segment decoder and driver IC in a 16-pin PDIP package operating from 0°C to 70°C, featuring ripple blanking and lamp test inputs for driving common-cathode LED and LCD numeric displays.
Driver 4.5A 2-OUT Lo Side Non-Inv 8-Pin SOIC Tube
Precision micropower shunt voltage reference
Texas Instruments PCA9306DCUR is a dual bidirectional I2C and SMBus voltage-level translator supporting 1.2 V to 3.6 V on one side and 1.8 V to 5.5 V on the other in a compact SOT-23-6 or VSSOP package. Available from stock with worldwide shipping.
Flip Flop D-Type Pos-Edge 1-Element 5-Pin SC-70 T/R
Texas Instruments ADS8344E, 16-bit Serial ADC Differential, Single Ended Input, 20-Pin SSOP
Metering Systems on a Chip - SoC Ultrasonic MCUs With 256KB FRAM, 12Bit - 8 MSPS Sigma Delta ADC, LEA, AES & IIC Boot Loader 100-LQFP -40 to 85
Single Inverter Gate
620-V, 1.8-A, 2.8-A High-Side Low-Side Gate Driver with Interlock
SN74HC132PWRE4 is a quad 2-input Schmitt-trigger NAND gate in the 74HC CMOS logic family, operating from 2 V to 6 V with hysteresis for noise immunity. Packaged in a 14-pin TSSOP for surface-mount assembly. Available from stock worldwide at competitive pricing.
MCU 16-bit MSP430 MSP430 RISC 60KB Flash 2.5V/3.3V 64-Pin LQFP T/R
Flip Flop D-Type Pos-Edge 2-Element 14-Pin CDIP Tube
GREEN, PLASTIC, SSOP-48
TEXAS INSTRUMENTS - TLC5920DLG4 - 16X8BIT LED DRIVER/CONTRLR, SSOP48
TO-220, 3 PIN
Multiplexer Switch ICs Hi-Spd CMOS Anlg Mltplxr/Demltplxr
Buffers & Line Drivers 16B Buffers/Drivers
Multiplexer Switch ICs Hi Spd CMOS 8-Ch Ana Multipl/Demult
16-Bit Buffers/Drivers with 3-State Outputs
16-Bit Buffers/Drivers with 3-State Outputs
Buffer/Line Driver 16-CH Non-Inverting 3-ST CMOS 48-Pin SSOP T/R
CD74HC107MG4 is a dual JK negative-edge-triggered flip-flop IC in a 14-pin SOIC package by Texas Instruments. It operates up to 20 MHz with a 50 pF load capacitance and supports 2 independent flip-flop elements. Available from stock worldwide at competitive pricing.
Inverter Schmitt Trigger 3-Element CMOS 8-Pin VSSOP T/R
Texas Instruments CD74HC74M96G4 is a dual 1-bit D-type flip-flop in 14-pin SOIC operating up to 20 MHz with 5.2 mA output drive. Supports preset and clear inputs for synchronous digital design. Available from stock with worldwide shipping.
CD74HC74MTG4 is a dual positive-edge-triggered D-type flip-flop IC from Texas Instruments in the HC CMOS logic family, operating at up to 20 MHz with 50 pF load capacitance. Each flip-flop features independent active-low preset and clear inputs and provides both Q and Q-bar complementary outputs in a 14-pin SOIC surface-mount package. In stock worldwide for digital logic and synchronization designs.
GREEN, PLASTIC, SOT-23, 5 PIN
CD74HC30M96G4 is a single 8-input NAND gate from Texas Instruments in the HC/UH CMOS logic family. It operates with a 50 pF load capacitance, supports up to 5.2 mA output low current, and comes in a 14-pin SOIC tape-and-reel package for automated PCB assembly.
The CD74HC30MT is a single 8-input NAND gate logic IC from Texas Instruments in the HC CMOS family, housed in a 14-pin SOIC plastic/epoxy package with 50 pF load capacitance and 5.2 mA output sink current. It supports 2V to 6V supply voltage for versatile logic applications. Available from stock with competitive pricing and worldwide shipping.
Operational Amplifiers - Op Amps Excalibur High-Speed JFET-Input Dual
CD74HC30MTE4 is a high-speed CMOS 8-input NAND gate IC from Texas Instruments in the HC logic family with a single function and 14-pin SOIC package. It operates over a wide supply voltage of 2V to 6V with 5.2mA output sink current. Available from stock worldwide with competitive pricing.
The TLV2771CDG4 is a single general-purpose rail-to-rail output op-amp with ±3 V/6 V supply, 82 dB typical CMRR, and 2700 µV max offset. Packaged in an 8-pin SOIC for compact PCB designs. Available from stock with worldwide shipping.
Texas Instruments TL061CPE4 is a low-power JFET-input operational amplifier with 86 dB typical CMRR and 0.01 µA maximum bias current. It delivers high-impedance signal conditioning in an 8-pin DIP package with RoHS-compliant construction. Available from stock with worldwide shipping.
Low-power JFET-input operational amplifier with 86 dB typical CMRR, 0.02 µA max bias current, and internal frequency compensation, housed in an 8-pin DIP package for industrial temperature operation. Available from stock worldwide with fast shipping.
The CD4093BF3A is a quad 2-input NAND Schmitt trigger logic IC from Texas Instruments in the 4000-series CMOS family, housed in a 14-pin ceramic DIP package rated for -55°C to +125°C operation. It features hysteresis on all 4 inputs for superior noise immunity and a 50 pF load capacitance specification. Available from authorized distributors with worldwide shipping.
Dual general-purpose JFET-input operational amplifier from Texas Instruments with voltage-feedback architecture and ±15V supply rating. Features ultra-low bias current of 0.05µA max and 100dB typical common-mode rejection ratio for precision analog applications. Available in an 8-pin ceramic DIP package with worldwide shipping.
The LM117HVH-QML is a QML-qualified adjustable linear voltage regulator from Texas Instruments with a 40 V maximum input-to-output differential and 3.3 V nominal dropout. It delivers precise 0.04%/V line regulation in a 3-lead TO-39 metal can package, suitable for military and space-grade power supply designs requiring traceability.
TL431AIDG4 is an automotive-grade adjustable precision voltage reference with an output range of 2.495V to 36V and up to 100mA sink current. It is packaged in an 8-pin SOIC for robust feedback control in power supplies.
Op Amp Single Precision Amplifier R-R I/O ±2.75V/5.5V 8-Pin SOIC T/R
Texas Instruments CD74HC221M96E4 is a dual non-retriggerable monostable multivibrator in a 16-pin SOIC package. It supports supply voltages from 2 V to 6 V with output pulse widths programmable via external RC networks. Available in tape-and-reel packaging for automated assembly with worldwide shipping.
SN74AUC1G86DCKRE4 is a single 2-input XOR gate from Texas Instruments' AUC logic family, operating on 0.8 V to 2.7 V supply with ultra-low power consumption in a 5-pin SC-70 package. It delivers 5 mA output drive and 15 pF load capability, suited for level translation and signal parity tasks. Supplied in RoHS e4 lead-free tape-and-reel format.
The SN74AUC1G86DCKRG4 is a single 2-input XOR gate in the AUC low-voltage logic family, operating down to 0.8V supply with 15 pF load capacitance and 9 mA output drive in a 5-pin SC-70 package. It provides ultra-fast switching for level translation and digital comparison in portable and battery-powered designs. From $0.28 in stock worldwide shipping.
Schmitt Trigger Buffer 1-CH Non-Inverting Push-Pull CMOS 5-Pin SC-70 T/R
The DAC7822IRTATG4 is a 12-bit dual-channel digital-to-analog converter from Texas Instruments with parallel word input interface and multiplying capability. It offers 0.0244% max linearity error and binary input code in a 40-pin QFN package. Available in stock worldwide with competitive pricing.
Buffer/Line Driver 1-CH Non-Inverting 3-ST CMOS 5-Pin SC-70 T/R
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote