Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
41,509
Total Products
126
Categories
All Texas Instruments Components
Showing 20,201–20,250 of 41,509
5-V RS-485 transceiver up to 500 kbps with ±8-kV IEC ESD protection
Texas Instruments TS5A4624DCKTE4 is a single-channel SPDT analog switch in a compact 6-pin SC70 package with 2.5 Ω maximum on-resistance and 63 dB off-state isolation. It delivers 0.15 Ω on-resistance matching for signal routing applications. Available from stock worldwide with competitive pricing.
Multi Function Gate 1-Element 2-IN CMOS 6-Pin SC-70 T/R
10-MHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems
Single high precision, wide bandwidth, low noise operational amplifiers
Automotive LVDS Dual High-Speed Differential Transceiver
LM25085SD/NOPB is a wide-input constant on-time non-synchronous PFET buck controller from Texas Instruments in an 8-pin SON package. It operates over a 4.5 V to 42 V input range using voltage-mode control for simple loop compensation. Available globally in a compact Pb-free package for industrial and automotive DC-DC step-down designs.
High Speed Operational Amplifiers A 595-THS3215IRGVT 650-MHz, Differential to Single-Ended DAC Output Amplifier
AND Gate 2-Element 4-IN Bipolar 14-Pin PDIP Tube
IC TRANSCEIVER FULL 2/2 16SOIC
Nine-Channel I2C RGB LED Driver With Engine Control and Charge Pump
Voltage References Adjustable Precision Shunt Regulator
Conv DC-DC 4V to 60V Inv/Step Down Single-Out 1.23V to 57V 3A 6-Pin(5+Tab) TO-263 T/R
IC DAC 8BIT MULTIPLYING CASE 648
Single 3-Input Positive-NOR Gate
Use the download button to access the TUSB213IRGYT schematic symbol, PCB footprint, and 3D model.
Single-Channel High-Speed Low-Side Gate Driver With 4-A Peak Source and 8-A Peak Sink
Switching Voltage Regulators NRND, alternate is LM2576HVS-12/NOPB
Use the download button to access the LMR23625CFPDRRT schematic symbol, PCB footprint, and 3D model.
4-20mA Current Transmitter with Bridge Excitation And Linearization
LMR23630 SIMPLE SWITCHER® 36-V, 3-A Synchronous Step-Down Converter
Motor / Motion / Ignition Controllers & Drivers Low Voltage Haptic Driver
16-bit Microcontrollers - MCU Ultra low power MCU
Use the download button to access the TMP112NAIDRLR schematic symbol, PCB footprint, and 3D model.
SIMPLE SWITCHER®, 36V 3A Synchronous Step-Down Converter
Texas Instruments SN74AUP1T97DCKRE4 is a single-supply configurable multiple-function gate in SC70-6 package. It features 3 inputs, majority logic function, and operates from 0.8 V to 3.6 V supply. Available in tape-and-reel packaging with worldwide shipping.
The LM22673TJ-5.0/NOPB is a 3 A SIMPLE SWITCHER step-down voltage regulator with a fixed 5 V output, adjustable soft-start and current limit, 4.5 V to 42 V input range, operating from -40°C to 125°C in a 7-pin TO-263 package.
Use the download button to access the TLIN1029DQ1 schematic symbol, PCB footprint, and 3D model.
1-mA, 300-MHz Gain Bandwidth, Voltage-Feedback Op Amp
Switching Voltage Regulators 3-A Boost Converter with 0.5-V Ultra Low Input Voltage 8-WSON -40 to 85
The ISO7761DBQR is a 6-channel digital isolator from Texas Instruments with a 6/1 channel direction split, providing galvanic isolation for mixed-direction signal transmission across high-voltage barriers. It operates from 2.25V to 5.5V on both sides and supports data rates up to 100 Mbps per channel. Housed in a 16-pin SSOP package, it suits industrial motor drives, solar inverters, and isolated fieldbus interfaces.
SOIC-16
SSOP-16
+3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link - 66 MHz
1.5-A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC
Analog Comparators Nanopower 1.8V Push-Pull
27V Flat-Clamp Surge Protection Device
VQFN-24
20W Digital Input Smart Amp with I/V Sense for Speaker Protection and 4.5-18V Supply Voltage Range
Automotive 3A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator
Texas Instruments TPS7A5401QRGRRQ1 is an automotive-grade 4 A adjustable LDO voltage regulator with 150 mV typical dropout, 1.1 V to 6.5 V input range, and ±0.5% output accuracy in a 20-VQFN package. AEC-Q100 qualified for -40 °C to +150 °C operation. Available from stock with worldwide shipping.
The Texas Instruments TVS1400DRVR is a 14 V flat-clamp transient voltage suppressor surge protection device with a silicon diode and clamping voltage up to 18.4 V in a small outline no-lead package. It provides single-channel complex protection against ESD and surge transients. Available from stock worldwide with fast shipping.
Automotive 2A High-Accuracy Low-Noise Low-Dropout (LDO) Voltage Regulator
Automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator
200mA Low-Iq Low-Noise Low-Dropout (LDO) Regulator in Ultra-Small 0.8mm x 0.8mm WCSP
Texas Instruments 74LVC1G126DCKTE4 is a single-gate non-inverting 3-state bus buffer in a compact SC70-5 package, LVC family, with active-high enable control for 1.65 V to 5.5 V level translation. Available in stock worldwide with fast shipping.
OPAx375, 500uV, 10-MHz, Low Broadband Noise, RRO, Operational Amplifier
Single Buffer/Driver With Open-Drain Output
Piccolo™ 32-bit MCU with 100 MHz, FPU, TMU, 256 KB Flash, CLA, PGAs, SDFM
Switching Voltage Regulators SIMPLE SWITCHER Power Converter 150 kHz 0.5A Step-Down Voltage Regulator 8-SOIC
Need Texas Instruments Components?
Get competitive quotes from authorized China distributors
Request a Quote