Texas Instruments

Fault-Protected RS-485 Transceivers with 3.3-V to 5-V Operation

Use the download button to access the SN65HVD12P schematic symbol, PCB footprint, and 3D model.

EMC OPTIMIZED CAN TRANSCEIVER

Designed to Operate at up to 20 Million Data communication networks. Transfers per Second on Each RS-422/RS-485 Channel The SN65HVD09 is characterized for operation over an ambient air temperature range of –40°C to 85°C. • SN65HVD09 Packaged in Thin Shrink Small-Outline Package with 0.5-mm Pin Pitch • ESD Protection on Bus Pins Exceeds 12kV • Low Disabled Supply Current 8 mA Typ • Thermal Shutdown Protection • Positive- and Negative-Current Limiting • Power-Up/Down Glitch Protection

Use the download button to access the SN65EPT23DR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65EPT23DGK schematic symbol, PCB footprint, and 3D model.

Use the download button to access the SN65EPT22DR schematic symbol, PCB footprint, and 3D model.

• Dual 3.3V LVTTL to LVPECL Buffer LVPECL translator device. The device includes • Operating Range circuitry to maintain known logic HIGH level when – LVPECL VCC = 3.0 V to 3.6 V With inputs are in open condition. The SN65EPT22 is GND = 0 V housed in an industry standard SOIC-8 package and is also available in TSSOP-8 package option. • Support for Clock Frequencies to 2.0 GHz (typ) • 420 ps Typical Propagation Delay Device Information(1) • Deterministic HIGH Output Value for Open Input PART NUMBER PA

SN65EPT21DR is a 3.3V differential PECL/LVDS to TTL translator IC from Texas Instruments. It features low-skew clock driver design with 20pF load capacitance and 24mA output current. From $2.09, in stock with worldwide shipping.

1 ns Propagation Delay PIN ASSIGNMENT(Add pullup on BOTH inputs) • Fmax > 300MHz • Operating Range: VCC = 3.0 V to 3.6 V with D or DGK PACKAGE GND = 0 V (TOP VIEW) • 24-mA TTL Output • Built-In Temperature Compensation • Drop-In Compatible to the MC10EPT21, MC100EPT21

Use the download button to access the SN65EPT21DGK schematic symbol, PCB footprint, and 3D model.

3.3V ECL Differential Receiver

5-V Dual Differential PECL Buffer-to-TTL Translator

5-V Dual Differential PECL Buffer-to-TTL Translator

5V Dual Differential PECL Buffer to TTL Translator

5-V Dual TTL-to-Differential PECL Translator

Dual TTL-to-Differential PECL Translator

5V Dual TTL to Differential PECL Translator

Use the download button to access the SN65ELT22D schematic symbol, PCB footprint, and 3D model.

The SN65ELT21DR is a 5-V PECL-to-TTL translator IC from Texas Instruments. It features low-skew clock driver architecture with 20 pF load capacitance and 24 mA output current. From $1.27, available in SOIC-8 package with worldwide shipping.

5-V PECL-to-TTL Translator

5-V PECL-to-TTL Translator

5-V TTL-to-Differential PECL Translator

5V TTL to Differential PECL Translator

5-V ECL Differential Receiver

ECL Differential Receiver 0/1 Receiver 8-VSSOP

SN65EL16DGK is a 5.0V ECL differential buffer IC from Texas Instruments with 1-bit driver, differential input characteristics, and general purpose line receiver interface. From $1.85, in stock worldwide shipping.

1:2 Fanout Buffer

The SN65EL11DGK is a PECL/NECL 1:2 fanout buffer and low-skew clock driver from Texas Instruments in an 8-pin SOIC package. It features differential ECL inputs, two true outputs, and supports NECL mode with VEE from -4.2V to -5.7V for high-speed clock distribution. Available from stock with worldwide shipping.

1.5-Gbps LVDS/LVPECL/CML-TO-CML TRANSLATOR/REPEATER

Extended Temp Range RS-485 Transceiver

RS-485 LINE DRIVER AND RECEIVER PAIRS

Single Output LDO, 150mA, Fixed(1.2V), Power Okay(POK) function, Low Quiescent Current

30-mA Switched-Cap DC-DC Converter with fixed 3.3-V Output

The REG113EA-3.3/250 is a fixed 3.3V, 400mA low-noise, low-dropout linear voltage regulator from Texas Instruments with a typical dropout voltage of 0.25V (maximum 0.41V). It accepts input voltages from 3.7V to 10V and is housed in an 8-pin SOIC package, making it ideal for noise-sensitive analog and RF supply rail applications in portable and battery-powered systems.

3 µVpp/V Noise, 3 ppm/°C Drift Precision Series Voltage Reference

3 µVpp/V Noise, 3 ppm/°C Drift Precision Series Voltage Reference

Low Noise, Very Low Drift, Precision Series Voltage Reference