Texas Instruments

TLC7226ING4 is a quad-channel 8-bit voltage-output digital-to-analog converter from Texas Instruments. It provides 4 independent DAC outputs in a single 20-pin DIP package for parallel-bus control systems. Suitable for industrial and instrumentation applications requiring multi-channel analog signal generation at low cost.

Texas Instruments OPA4354AIDG4 is a quad-channel CMOS op-amp featuring 250 MHz gain-bandwidth product, rail-to-rail input and output, and 50 pA input bias current in a compact 14-pin SOIC package. From $2.80 in stock with worldwide shipping.

HLQFP-128

Operational Amplifiers - Op Amps 36V, Low Power, All-Purpose Amplifier with MUX-Friendly Input 14-SOIC -40 to 125

Switch ICs - Various Dual-Slot Power Interface

Shift Register Single 8-Bit Serial to Serial/Parallel 24-Pin SOIC T/R

The TLC272CPE4 is a dual CMOS operational amplifier from Texas Instruments with voltage-feedback architecture, ultra-low input bias current of 60pA, and 80dB typical common-mode rejection ratio. It features internal frequency compensation and operates from a wide supply range in an 8-pin DIP package. Available from stock worldwide with fast shipping.

Op Amp Quad Precision Amplifier ±22V/44V 14-Pin CDIP Tube

SN74LVC1G19DBVRG4 is a single 1-to-2 decoder/demultiplexer from Texas Instruments in the LVC logic family. Features 3-state outputs, 50pF load capacitance, and 24mA output current in a 6-pin SOT-23 package. RoHS compliant and available worldwide for portable and low-voltage logic applications.

Microprocessors - MPU Sitara Processor: Dual Arm Cortex-A15 1089-FCBGA 0 to 85

Texas Instruments ADS7955SDBTG4 is an 8-channel, 10-bit successive-approximation ADC with 0.8 µs conversion time and SPI-compatible interface. Supports analog input voltages up to 5.02 V and fits into a compact TSSOP-30 package. Available in tape-and-reel format for automated SMT assembly and worldwide distribution.

Inverter Schmitt Trigger 6-Element CMOS 14-Pin PDIP Tube

Microprocessors - MPU Sitara Processor: Dual Arm Cortex-A15 1089-FCBGA 0 to 85

Use the download button to access the LT1013AMJGB schematic symbol, PCB footprint, and 3D model.

Microprocessors - MPU Sitara Processor: Dual Arm Cortex-A15 1089-FCBGA -40 to 100

100-mA, 16-V, low-dropout voltage regulator with high-accuracy & enable

Microprocessors - MPU Sitara Processor: Dual Arm Cortex-A15 1089-FCBGA -40 to 100

Microprocessors - MPU Sitara Processor: Quad Arm Cortex-A15 1089-FCBGA 0 to 85

Gate Drivers 6Ch Ser/Para Low- Side Pre-FET Drvr

OP Amp Dual GP ±15V/30V 8-Pin CDIP Tube

DS90C363MTD NOPB is an LVDS flat panel display serializer from Texas Instruments delivering 1300 Mbps data rate with 0.45 V differential output swing. It converts 21-bit RGB parallel data to a high-speed LVDS serial stream in a 48-pin TSSOP package for LCD panel interfaces.

Precision Amplifiers Dual Precision Op Amp

The TAS5706APAPRG4 is a high-efficiency Class-D audio amplifier IC from Texas Instruments, delivering 20.6W nominal output power across 2 channels stereo or up to 4-channel configurations in a 64-pin HTQFP package. It supports a 20kHz audio bandwidth with digital PWM input and is RoHS-compliant for modern consumer audio designs. Available in tape-and-reel packaging from stock worldwide for speaker amplifier system applications.

150mA Low-Noise Low-Dropout Regulator With Shutdown

IC GATE NAND 4CH 2-INP 14DIP

Digital to Analog Converters - DAC Quad Ser Input 12B Vltg Output DAC

LDO Voltage Regulators Dual-Output LDO Voltage Regulator

MSP430F5438AIPZ-870923101 is a Texas Instruments integrated circuit for industrial, embedded, and electronic equipment assemblies. It offers 100-pin configuration, and 0C to 0C operating range. Available for inquiry-based sourcing with worldwide shipping.

Resistive Touch Screen 4-Wire 24-Pin DSBGA Tape and Reel

Use the download button to access the DAC7614UG4 schematic symbol, PCB footprint, and 3D model.

Industry's smallest, low-power, high-precision dual Op Amp with >300kHz GBW

Operational Amplifiers - Op Amps Quad Lo-Noise JFET- Inp Gen-Purp Op Amp

Encoders, Decoders, Multiplexers & Demultiplexers 1 of 2 Noninverting Demultiplexer

CD74HC366EE4 is a high-speed CMOS hex inverting buffer and line driver with dual active-low output enable in a 16-pin DIP package, operating at 2 V to 6 V supply.

TEXAS INSTRUMENTS - DAC8812ICPWG4 . - Digital to Analogue Converter, Dual, 16 bit, 2 MSPS, 3 Wire, Serial, 2.7V to 5.5V, TSSOP, 16 Pins

8-bit shift register

Shift Register Single 8-Bit Serial to Serial/Parallel Automotive 24-Pin SOIC Tube

Low-Power, Rail-to-Rail In/Out, Op Amp

Analog to Digital Converters - ADC 10B 1MSPS 4Ch Sgl Ended Micro Pwr

Hall Effect Sensor 30mA Latch 3.3V/5V 3-Pin SOT-23 T/R

Enhanced Product Quad Low-Noise JFET-Input, General Purpose Operational Amplifier

2.4V-5.5V input, tiny 6-pin 3A step-down converter in 1.2-mm x 0.8-mm WCSP

1MP MIPI CSI-2 FPD-Link III Deserializer for 1MP/60fps & 2MP/30 fps

Texas Instruments PUCC5320SCDWV is a single-channel isolated gate driver with 2 A source and 2 A sink capability, supporting bipolar supply or split output configurations. Available in 8-pin SOIC package with worldwide shipping.

Low power, small size comparator with open-drain output

TEXAS INSTRUMENTS - OPA336N - OP AMP, CMOS UPOWER, SOT-23-5, 336

The PBQ7791500PWT is an ultra-low-power primary battery protector IC from Texas Instruments supporting 3-series to 5-series stackable Li-ion cell configurations with autonomous cell balancing built in. It monitors overvoltage, undervoltage, and overcurrent conditions to protect battery packs in portable devices. Available from stock worldwide with fast shipping.

Counter Shift Registers 8-Bit Shift Registers With 3-State Output Registers 16-CDIP -55 to 125

Texas Instruments LM337IMP NOPB is a negative adjustable linear voltage regulator delivering -1.2 V to -37 V output and up to 1 A output current, packaged in a 4-pin SOT-223 SMT package for compact negative rail power supply designs.

Texas Instruments TPS60101PWPG4 is a switched-capacitor charge pump step-up regulator that boosts a 1.8 V to 3.6 V input to a regulated 3.3 V output at up to 100 mA in a 20-pin HTSSOP package. It requires no inductors, using only small external capacitors for a compact, low-noise power supply solution. Available from stock worldwide with fast shipping.