Texas Instruments

Use the download button to access the DAC60508ZRTET schematic symbol, PCB footprint, and 3D model.

SIMPLE SWITCHER® 3.8V to 36V, 3A Synchronous Buck Converter With Ultra-Low EMI

Texas Instruments TMS320F28377DPTPEP is a 32-bit C2000 DSP microcontroller running at up to 200 MHz with dual-core architecture, integrated ADC, DAC, and 21-bit address bus in a QFP package. Designed for high-performance real-time control in power conversion and motor drive systems. Available from stock with worldwide shipping.

Texas Instruments LM5023MMX-2/NOPB is an AC-DC quasi-resonant current-mode PWM controller operating from 8 V to 14 V input, designed for flyback and forward converters in an 8-pin SOIC package, available with worldwide shipping.

LDO Voltage Regulators Sgl Output LDO 150 mA Fixed(3.0V)

LM4040A10IDCKRG4 is a precision 10 V shunt voltage reference from Texas Instruments with ±0.1% initial accuracy and two-terminal operation, available in a compact 5-pin SC-70 package.

2.4V-5.5V input, 1A step-down converter With 1% Accuracy in 1.5x2mm QFN

Use the download button to access the TMP235A2DCKR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the ISOW7840FDWE schematic symbol, PCB footprint, and 3D model.

The TLV6741DCKT is a 10 MHz, low-power, low-noise rail-to-rail output operational amplifier from Texas Instruments, featuring 95 dB minimum CMRR and a maximum input offset voltage of 1000 µV in a 5-pin SOT-23 package. It delivers precision signal conditioning in space-constrained designs. Available from stock worldwide with competitive pricing and fast shipping.

SSOP-16

80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection

Use the download button to access the TPSM84424MOLR schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps 1MHz 45uA RRIO Single Op Amp

SOIC-8

SSOP-16

Inverters AutoCat Hex Schmitt Trigger Inverter

SSOP-16

5V Flat-Clamp Surge Protection Device

Oscillator XO 156.25MHz ±50ppm LVPECL 55% 3.3V Medical 8-Pin QFM SMD T/R

Use the download button to access the PTHVD1450D schematic symbol, PCB footprint, and 3D model.

Single Schmitt-Trigger Inverter Gate

80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection

Texas Instruments TS5A4624DCKRG4 is a single-channel SPDT analog switch with 90 MHz bandwidth and 63 dB off-state isolation, supporting signals up to 6.5 V. It routes analog or digital signals in a miniature 6-pin SOT-23 surface-mount package. Available from stock with worldwide shipping.

Single Output LDO, 1A, Adj. (1.2 to 5.0V), Reverse Current Protection

Use the download button to access the INA828ID schematic symbol, PCB footprint, and 3D model.

High-Frequency Multi-Mode Synchronous Rectifier Controller

80V, Low-/High-Side, Bi-Directional, Zero-Drift, Current Sense Amp w/Enhanced PWM Rejection

Automotive Low-Power 96kHz Mono Audio Codec

Use the download button to access the LM340K-5.0/NOPB schematic symbol and PCB footprint.

CMOS Dual 4-Stage Static Shift Register

High-Frequency Multi-Mode Synchronous Rectifier Controller

Gate Drivers Inverting Fast Sync Buck MOSFET Driver

TEXAS INSTRUMENTS - CD4015BM96 - SHIFT REGISTER, DUAL, SIPO, SOIC-16

Power Switch ICs - Power Distribution Automotive, 40-V, 1-ohm Single-Channel Smart High-Side Switch 8-MSOP-PowerPAD -40 to 125

The SN74LS93NG4 is a 4-bit binary ripple counter in a 14-pin DIP package from the 74LS TTL logic family. It features two independent clock inputs, asynchronous reset, and operates at 5 V supply voltage, suitable for frequency division and digital counting applications.

USB Interface IC

27V, 1.2A switch, 1.2MHz Boost Converter with integrated power diode

Analog Switch Single SPDT 6-Pin SC-70 T/R

Use the download button to access the TPS22917DBVR schematic symbol, PCB footprint, and 3D model.

±2.5°C Analog output temperature sensor, with 10mV /°C gain

The TS5A4624DCKRE4 is a single-channel SPDT analog switch from Texas Instruments with a 1 Ω typical on-resistance, 63 dB off-state isolation, and 2.5 Ω maximum Ron, packaged in a compact SOT-23-6 for space-constrained signal routing. RoHS-compliant and available in tape-and-reel format for high-volume production.

TL7700CPE4 is an adjustable-threshold voltage supervisor and power-on reset generator in an 8-pin PDIP package. It monitors supply voltages from 1V to 18V and holds the reset signal asserted for a programmable delay after supply recovery.

Metering Systems on a Chip - SoC Ultra low power Micro Controller

4-V to 8-V, 3-A, 2-A Triple Synchronous Step-Down Converter

4-A, 6-A, 3.0-kVRMS Isolated Dual-Channel Gate Driver

Use the download button to access the ISOW7843DWE schematic symbol, PCB footprint, and 3D model.

TEXAS INSTRUMENTS - INA214BIDCKT - CURRENT SHUNT MONITOR, 30KHZ, SC70-6

High Temperature 3.3-V RS-485 Transceiver

Metering Systems on a Chip - SoC 512KB Flsh 32KB SRAM Mixed Signal MCU