Texas Instruments

The RC4136NE4 is a quad general-purpose voltage-feedback operational amplifier from Texas Instruments, featuring four independent op-amps with 70dB minimum CMRR, 0.5µA typical bias current, and internal frequency compensation in a 14-pin DIP package. Operates across standard bipolar supply ranges making it suitable for analog signal processing. Available with RoHS compliance, competitive pricing, and worldwide in-stock shipping.

Single Wide-Bandwidth High-Output-Drive Op Amp

Automotive 300mA Low-Iq, High PSRR Low-Dropout (LDO) Regulator

Buffer/Driver 1-CH Non-Inverting Open Drain CMOS 5-Pin SC-70 T/R

Inverter 1-Element CMOS 5-Pin SC-70

AFE General Purpose 8 ADC 16bit 1.8V/3V 64-Pin NFBGA T/R

2-Channel, 1MHz, RRIO, 1.8V to 5.5V Operational Amplifier for Cost-Optimized Systems

The LP8556SQ-E09/NOPB is a 6-channel high-efficiency LED backlight driver IC from Texas Instruments, housed in a 24-Pin QFN package. It supports 12 LED segments, serial data input, and delivers high efficacy for LCD backlight applications. Available from stock worldwide with competitive pricing.

LMR23615-Q1 SIMPLE SWITCHER® 36-V, 1.5-A Synchronous Step-Down Converter

The ISO7761FDBQR is a 6-channel reinforced digital isolator from Texas Instruments designed to isolate digital signals across high-voltage barriers with reinforced insulation rating. It operates from 2.25V to 5.5V supply on both sides and supports up to 100 Mbps data rate per channel with a 6/1 bidirectional channel configuration. Packaged in a 16-pin SSOP, it is designed for industrial motor drives, renewable energy inverters, and safety-critical isolated signal interfaces.

SOIC-16

IEEE 802.3bt PoE High-Power PD Interface with Advanced Startup

The Texas Instruments TCAN1051GDRBRQ1 is an automotive-qualified single-channel CAN bus transceiver supporting data rates up to 5Gbps in an 8-pin SON package. It is AEC-Q100 qualified with a 15-year YTEOL and compliant with CAN FD specifications for high-speed automotive networking. Available from stock worldwide with fast delivery.

Use the download button to access the TPS543B20RVFT schematic symbol, PCB footprint, and 3D model.

Dual 5A Compound Gate Driver with Negative Output Voltage Capability

Automotive Low-Quiescent-Current 1% Accurate Supervisor With Programmable Delay

TSSOP-24

3-Channel HDTV Video Amplifier with 5th Order Filters and 6dB Gain

DSBGA-6

Texas Instruments, LM2576HVT-ADJ/NOPB Step-Down Switching Regulator 3A Adjustable, 1.23 → 57 V 5-Pin, TO-220

Automotive Reinforced Isolated Modulator With LDO Regulator, ±50mV Input and LVDS Interface

Bus Receivers FLATLINK RECEIVER

Switching Voltage Regulators 3.5V to 36V, 6A Synchronous Step-Down Voltage Converter 30-WQFN -40 to 125

4.5V to 18V INPUT, 2-A SYNCHRONOUS STEP DOWN CONVERTER WITH INTEGRATED FET

SIMPLE SWITCHER® 3.8V to 36V, 3A Synchronous Buck Converter With Ultra-Low EMI

LDO Voltage Regulators Sgl Output LDO 150 mA Fixed(3.0V)

SIMPLE SWITCHER® 3.8V to 36V, 2A Synchronous Buck Converter With Ultra-Low EMI

Use the download button to access the LM78L15ACZ/NOPB schematic symbol, PCB footprint, and 3D model.

Micro-Power (50 µA), Zero-Drift, Rail-to-Rail-Out Instrumentation Amplifier

Use the download button to access the TPS7350QDR schematic symbol, PCB footprint, and 3D model.

Use the download button to access the TCAN1051DRBRQ1 schematic symbol, PCB footprint, and 3D model.

Adaptive Zero Voltage Switching Active-Clamp Flyback Controller

4-Data Lane 2:1 MIPI Switch (10-Channel, 2:1 Analog Switch)

Audio Amplifiers 3W, Ultra Low EMI, Mono Class D Audio Amplifier with Spread Spectrum 24-WQFN -40 to 85

Dual Micro-Power Rail-to-Rail Input CMOS Comparator with Push-Pull Output

Low-power Half-duplex RS-485 Transceiver

Automotive, High/Low Side, Bi-Directional Zerø-Drift Current Sense Amp w/ Enhanced PWM Rejection

LMP91002SDX/NOPB is a temperature sensor by Texas Instruments. Key specs include JESD-30 Code: S-PDSO-N14; JESD-609 Code: e3. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

Conv DC-DC 1.8V to 6V Step Up Single-Out 1.8V to 27.5V 8-Pin VSON EP T/R

High Speed Operational Amplifiers 3V Single Supply 80MHz High-Speed

The TPSM84824MOLR is a current-mode PWM switching regulator with built-in inductor from Texas Instruments in a QFM-24 package. It accepts 4.5V to 17V input and provides adjustable output from 0.6V to 10V. Available from stock with worldwide shipping.

Use the download button to access the LM5176PWPR schematic symbol, PCB footprint, and 3D model.

MSP430F53xx Mixed Signal Microcontroller

The CD40106BPWRE4 is a 6-element CMOS Schmitt trigger inverter from Texas Instruments in the 4000-series logic family. It features six independent single-input inverters with hysteresis for clean signal switching in a 14-pin TSSOP package. Available from stock worldwide with competitive pricing.

The TPSM846C23MOLR is a 35A PMBus power module from Texas Instruments accepting 4.5V to 15V input and delivering 0.35V to 2.0V adjustable output using voltage-mode PWM control. It integrates controller, power MOSFETs, and magnetics for minimal external BOM in high-density digital power applications. Available from stock worldwide with competitive pricing.

The UCC5310MCD is a single-channel isolated gate driver from Texas Instruments delivering 2A source and 1A sink current with integrated Miller clamp in an 8-SOIC package. It supports differential input and built-in UVLO and transient protection, operating from -40 to 125°C. Available from stock worldwide with competitive pricing.

4.5V to 15V Input, 0.35V to 2.0V Output, 35A Power Module

The ISO7710D is a single-channel digital isolator from Texas Instruments, packaged in an 8-pin SOIC-8 outline with a plastic/epoxy body for reliable galvanic signal isolation. It is Pb-free and RoHS compliant with a JESD-609 e4 matte-tin finish, suiting industrial, medical, and communication designs that need safe digital signal transfer across isolation barriers.

ESD-Protected, 2-Channel, 2:1 Switch, With Powered-off Protection

IC GATE NAND 1CH 2-INP SOT-23-5