Texas Instruments

Operational Amplifiers - Op Amps Dual, 40-V, 10-MHz, low-power operational amplifier

The PTSM82903SISB2R is a 3-V to 17-V, 3-A synchronous buck converter module from Texas Instruments with integrated inductor, delivering high efficiency and ultra-low quiescent current for space-constrained power designs. Available from stock worldwide.

Digital to Analog Converters - DAC 16-channel 16-bit high-voltage output DAC with integrated internal reference 40-VQFN -40 to 125

The TLV3801DSGR is a high-speed single voltage comparator from Texas Instruments in an 8-pin WSON package, featuring a 5000 µV maximum input offset voltage, 10 µA bias current, and open-drain output for flexible logic interfacing. It is designed for line receivers, zero-crossing detectors, and window comparator circuits in 3.3 V or 5 V embedded systems.

Operational Amplifier, Single AMP, CMOS, 6 Pin, Plastic, TSOP

Texas Instruments LM4041QCIM3X-1.2NO is a precision micro-power two-terminal shunt voltage reference with a nominal 1.225 V output (1.2066 V to 1.2434 V range) in a 3-pin SOT-23 package. It delivers stable reference performance in automotive and industrial designs with minimal quiescent current draw. Available from stock with worldwide shipping.

Buffer, Non-Inverting 2 Element 4, 2 Bit per Element 3-State Output 16-WQFN (2.5x3.5)

Board Mount Current Sensors 100-V Hall-effect current sensor with internal reference 8-SOIC -40 to 85

PINA296A2IDDFR is a 4-V 110-V amplifier by Texas Instruments. Key specs: 4-V, 110-V, 1-MHz. From quote-based pricing, in stock with worldwide shipping for production sourcing.

Board Mount Current Sensors AEC-Q100, +/-100-V isolated Hall-effect current sensor with internal reference 8-SOIC -40 to 125

Analog to Digital Converters - ADC 16-bit 240SPS 2 Ch Diff

Use the download button to access the LM317HVH schematic symbol and PCB footprint.

Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-TO-92 -40 to 125

Digital to Analog Converters - DAC 12B,Dual,Lo Pwr Ultra-Lo Glitch DAC

Flip Flops Tri-State Octal

TL1963A-25KTTR is a fixed 2.5 V, 1.5 A low-dropout LDO regulator from Texas Instruments with low noise and fast transient response, accepting 3 V to 20 V input and housed in a 5-pin SOT-223 package for powering noise-sensitive analog and RF loads in consumer and industrial applications.

UCC27424DGNR is a dual-channel non-inverting low-side MOSFET gate driver by Texas Instruments in an 8-pin HVSSOP package. It provides totem-pole outputs for driving two independent power switches with standard input logic compatibility and strong gate current capability. Designed for DC-DC converters, motor drives, and synchronous rectification circuits requiring reliable MOSFET gate control.

16-bit Microcontrollers - MCU Ultra Lo Pwr MCU

The TPS7A0233PYCHR is a fixed 3.3 V, 200 mA nanopower LDO voltage regulator from Texas Instruments featuring an ultra-low quiescent current of only 25 nA and a typical 205 mV dropout voltage. It accepts an input voltage from 1.5 V to 6 V with an enable pin for power sequencing, housed in a miniature 4-pin DSBGA package measuring under 1 mm². The device is optimized for always-on IoT nodes, wearables, and energy-harvesting designs where maximizing battery life under light-load conditions is critical.

Use the download button to access the DAC43204RTER schematic symbol, PCB footprint, and 3D model.

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 5V 4A 2.95V - 5.5V Input , 2.95V , 5.5V , -40°C ~ 125°C

Logic Gates Automotive, 4-ch, 2-input 2-V to 6-V high-speed (12 ns) AND gate with Schmitt trigger inputs 14-SOT-23-THIN -40 to 125

The TPS75825KTTR is a fixed 2.5V, 1A low-dropout LDO regulator by Texas Instruments with a 150mV typical dropout and 5.5V maximum input. It features fast transient response and ultra-low quiescent current for portable systems. Available from stock with worldwide shipping.

LDO Voltage Regulators 800-mA, low-VIN (0.875-V), ultra-low-dropout voltage regulator with enable 5-DDPAK/TO-263 -40 to 125

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 2A 11-PowerVFQFN , 1.5MHz ~ 2.5MHz , -40°C ~ 125°C (TJ)

TPS61028DRCR is a current-mode PWM boost switching regulator from Texas Instruments with 0.9V to 6.5V input range and adjustable output up to 5.5V. It operates in a compact 10-Pin SON package ideal for battery-powered applications. Available from stock with worldwide shipping.

Buffers & Line Drivers LoVltg Hi-Sp Quad Di ff Line Drvr ALT 595-AM26LV31EIRGYR

Use the download button to access the ISO6742DWR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.5-V to 36-V, 1-A, synchronous buck with 40-uA IQ

Use the download button to access the LM2904BTQPWRQ1 schematic symbol, PCB footprint, and 3D model.

The TPS629210DRLR is a high-efficiency synchronous buck converter from Texas Instruments operating from 3V to 17V input with 1A output current. It features ultra-low quiescent current and PWM/PFM control modes for optimal efficiency across load ranges. From $0.80, available in stock with worldwide shipping.

The TIOL1123DRCR is an IO-Link transceiver IC from Texas Instruments with an integrated 3.3V LDO output. It supports the IO-Link communication standard and is housed in a compact 10-pin WSON/QFN package (S-PDSO-N10). Lead-free and RoHS compliant, it is designed for industrial sensor and actuator interfaces in factory automation systems.

TPS22992RXPR is a single-channel load switch IC from Texas Instruments supporting 0.1 V to 5.5 V input, integrated in an 8-pin QFN package with Pb-free construction for power sequencing and distribution control. From $0.60 in stock worldwide shipping.

The TPS7A2128PYWDJ is a 500 mA low-noise, low-IQ, high-PSRR LDO voltage regulator by Texas Instruments. Key specs: 2.8 V fixed output, 130 mV typical dropout voltage, 3.1 V to 6 V input range. Available from stock with worldwide shipping.

Switching Voltage Regulators pwr Cnvtr 150 kHz 1A SD Vtg Reg

Use the download button to access the BQ25173DSGR schematic symbol, PCB footprint, and 3D model.

Instrumentation Amplifiers

Texas Instruments LMK00304SQ/NOPB is a 3.1 GHz differential clock buffer and level translator with 4 true outputs in a 32-pin QFN package. Supports differential mux input, 5 pF load capacitance, and ultra-low skew for high-speed clock distribution. RoHS-compliant and available in stock with worldwide shipping.

THVD1400DRLR is a 3.3 V to 5 V RS-485/RS-422 transceiver from Texas Instruments with 500 kbps data rate, plus or minus 12 kV IEC ESD protection, differential Schmitt trigger input, and EIA-485-A compliance in a compact 8-pin SOT-23 flat-lead package. From $1.00 in stock worldwide shipping.

The SN74HC251DTG4 is an 8-to-1 data selector/multiplexer IC in a 16-SOIC package from Texas Instruments. It features three-state outputs, enabling bus-driving applications with up to 50 pF load capacitance. Available in stock worldwide with competitive pricing and RoHS-compliant e4 designation.

The Texas Instruments TMUX8212PWR is a high-voltage SPST analog switch with 420MHz bandwidth and an input voltage range of -10V to +50V. It is configured as a 1:1 single-pole single-throw switch suitable for signal routing in high-voltage systems. Available in a 16-pin SOIC package with RoHS-compliant lead-free construction.

The SN74LXC2T45DCUR is a dual-channel bidirectional voltage-level translator from Texas Instruments in an 8-pin SOIC package. It supports 32mA output drive and 15pF load capacitance for mixed-voltage bus interfacing. Available from stock with worldwide shipping.

BUF802IRGTR

Switching Voltage Regulators USB BC1.2 5-V 3.5-A output, 36-V input synchronous step-down converter with client mode support 32-VQFN -40 to 125

Power Management Specialized - PMIC Dual high-current bu ck converters and du

Ethernet ICs Low-power 100BASE-T1 automotive Ethernet PHY without TC10 36-VQFN -40 to 125

Current Sense Amplifiers 2.7-V to 26-V, high-precision current sense amplifier 5-SOT-23 -40 to 125

Texas Instruments TPS51396ARJET is a 4.5 V to 24 V input, 8 A synchronous step-down voltage regulator with pulse width modulation control. Operates across -40 to 125 °C in a compact 20-pin VQFN-HR package. Available from stock worldwide with fast shipping.

The TLV1117CKTTRG3 is a low dropout linear voltage regulator from Texas Instruments offering 800mA output current with both fixed and adjustable output options. It features a 1.2V typical dropout voltage and operates from 2.7V to 15V input in a 3-pin SOT-223 package. Available from stock with worldwide shipping.

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.5-V to 36-V, 0.6-A, synchronous buck with 80-uA IQ