Texas Instruments

The TLV1117CKTTRG3 is a low dropout linear voltage regulator from Texas Instruments offering 800mA output current with both fixed and adjustable output options. It features a 1.2V typical dropout voltage and operates from 2.7V to 15V input in a 3-pin SOT-223 package. Available from stock with worldwide shipping.

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.5-V to 36-V, 0.6-A, synchronous buck with 80-uA IQ

Use the download button to access the ISO1641DWR schematic symbol, PCB footprint, and 3D model.

Hot-swappable, robust-EMC bidirectional I²C Isolators with 3 GPIOs

Switching Voltage Regulators 3-V to 18-V input, 6-A synchronous step-down regulator with forced continuous conduction mode 9-VQFN-HR -40 to 125

TUSB217RGYRQ1 is a single-channel USB 2.0 signal conditioner by Texas Instruments designed for automotive applications. Key specs: 1-channel USB signal conditioning, AEC-Q100 qualified, VQFN-14 package. From stock with competitive pricing and worldwide shipping available.

Conv DC-DC 8V to 40V Step Down Single-Out 5V 0.5A 16-Pin WSON EP T/R

The TPS74612PQWDRBRQ1 is an automotive-grade 1 A LDO voltage regulator with low quiescent current, high PSRR, and power good output in an 8-pin SON package. Operates from 1.5 V to 6 V input with 190 mV typical dropout voltage across -40°C to 125°C. From $3.50 in stock worldwide shipping.

Ethernet ICs TC-10 compliant 100BASE-T1 automotive Ethernet PHY with 36-VQFN -40 to 125

Use the download button to access the ISO1642DWR schematic symbol, PCB footprint, and 3D model.

Isolation Amplifiers +/-50-mV input, precision reinforced isolated amplifier with integrated DC/DC converter 16-SOIC -40 to 125

Texas Instruments TMUX136MRSER is a dual 2:1 SPDT analog multiplexer switch in a 10-pin QFN package with 6100 MHz bandwidth. It features two independent channels for high-frequency signal routing in RF and wideband applications. Available from authorized distributors with worldwide shipping.

Switching Voltage Regulators 8-A automotive buck converter optimized for power density and low EMI

Texas Instruments TMUX1111RSVR is a 4-channel SPST analog switch with 400 MHz bandwidth in a 16-pin UQFN package, enabling high-speed signal routing for audio, video, and RF applications. Introduced in 2019 with 15 years to end-of-life. Available from stock worldwide with fast shipping.

Use the download button to access the ISO1643DWR schematic symbol, PCB footprint, and 3D model.

TPD4E001DPKR is a 4-channel low-capacitance ESD protection array from Texas Instruments rated for ±15 kV contact discharge per IEC 61000-4-2. It features a 25 V maximum clamping voltage and fits an ultra-compact 6-pin SOT-363 package to protect high-speed data lines in portable devices.

TPS7B8833QKVURQ1R2 is an AEC-Q100-qualified automotive-grade 3.3 V fixed LDO linear regulator from Texas Instruments, delivering 500 mA with a 390 mV typical dropout at 4.3 V to 40 V input. Offered in TO-252 package with 15-year longevity. From $1.20 in stock worldwide shipping.

LDO Voltage Regulators DMOS 1A LDO Reg, VERY LOW NOISE: 33µVRMS, IGND = 1.7mA at IOUT = 1A, Pakcage drawing KTT (DDPAK/TO-263)

TMUXHS4212RKST is a 2-channel 2:1/1:2 high-speed differential multiplexer supporting up to 16 Gbps per channel. It operates from a 1.8 V supply in a compact 20-VQFN package for 0 to 70°C applications. Sourced from Texas Instruments with worldwide distribution.

Switching Voltage Regulators Automotive 3.8-V to 36-V 2-A synchronou

Clock Buffer 4-channel output LVDS 1.8-V buffer

Operational Amplifiers - Op Amps Automotive-grade, quad, 5.5-V, 1-MHz, RRIO operational amplifier for cost-optimized applications

Supervisory Circuits Hi Acc Voltage Super w/ Wndw Wtcdog Timer

LDO Voltage Regulators 2-A, low-VIN (1.1-V), low-noise, high-accuracy, ultra-low-dropout voltage regulator with power good

Use the download button to access the TCAN1162DMTRQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments LM4041CIZ-ADJ/NOPB is a two-terminal adjustable shunt voltage reference with 1.225 V nominal output and up to 12 mA sink current in a 3-pin TO-92 package. Output is adjustable from 1.24 V to 10 V with external resistors. From $0.50, in stock, worldwide shipping.

USB Interface IC Single 3-A USB Type-C charging ports controller with load shedding

TL074 is a quad general-purpose JFET-input operational amplifier from Texas Instruments with low bias current, 70 dB minimum CMRR, and wide bandwidth in a 14-pin PDIP package, suitable for active filters and audio circuits. Available from stock with worldwide shipping.

Switching Voltage Regulators SIMPLE SWITCHER® 4.5V to 40V, 3A Low Component Count Step-Down Regulator 5-TO-220

Switching Voltage Regulators 8-A buck converter optimized for power density and low EMI

OPT4001 High Speed, High Precision, Digital Ambient Light Sensor , 1.6V ~ 3.6V , 550 nm , - 40 C + 85 C

Use the download button to access the TPS631000DRLR schematic symbol, PCB footprint, and 3D model.

Switching Voltage Regulators 8-A automotive buck converter optimized for power density and low EMI

Switching Voltage Regulators 8-A automotive buck converter optimized for power density and low EMI

UCD3138064RJA is a integrated circuit for board-level control by Texas Instruments. Key specs: 45 pins, 64-kB, production sourcing support. From inquiry pricing, in stock with worldwide shipping.

TC-10 compliant 100BASE-T1 automotive Ethernet PHY with RGMII & SGMII

Ethernet ICs TC-10 compliant 100BASE-T1 automotive Ethernet PHY with RGMII 36-VQFN -40 to 125

RF Microcontrollers - MCU

The TL751M12QKTTRQ1 is an automotive-grade fixed 12V LDO voltage regulator from Texas Instruments with single output. It supports input voltages from 13V to 26V with a maximum dropout of 0.6V, making it ideal for automotive 12V and 24V rail regulation. AEC-Q100 qualified in SOT-23-5 package with worldwide shipping.

Temperature Sensor Analog, Local -50°F ~ 300°F 10mV/°F TO-46-3

TEXAS INSTRUMENTS - LM1117SX-ADJ/NOPB - LDO Voltage Regulator, Adjustable, 4 V to 26 V input, 1.2V Dropout, 800 mA out, SOIC-8

The TMS320DM6446AZWT is a DaVinci digital media SoC integrating a C64x+ DSP at 594 MHz with 4752 MIPS and an ARM926EJ-S at 297 MHz in a 361-ball BGA package. Supports I2C, SPI, UART, USB interfaces with 32-bit fixed-point processing. From $25.00 in stock worldwide shipping.

TPD1E10B06DYAR is a single-channel bidirectional TVS diode with 6V minimum breakdown voltage and 10V maximum clamping voltage. It delivers 90W peak reverse power dissipation in a compact SOD-F2 flat-lead package. Available from stock with worldwide shipping at competitive pricing.

Optically Isolated Amplifiers Automotive, 0-V to 5-V input, precision reinforced isolated amplifier for voltage sensing

The TMS320P14FNL is a 16-bit fixed-point digital signal processor from Texas Instruments in a 68-pin PLCC package for 0°C to 70°C operation. Delivers 6.4 MIPS performance at 35.1MHz with barrel shifter, capture/compare unit, and ROM protection features. Available from stock with worldwide shipping.

Optically Isolated Amplifiers Automotive +/-5-V-input precision reinforced isolated amplifier for voltage sensing

Isolation Amplifiers ±5-V input, precision voltage sensing reinforced isolated amplifier 8-SOIC -40 to 125

Isolation Amplifiers 0-V to 5-V input, precision reinforced isolated amplifier for voltage sensing

Use the download button to access the AMC1351DWV schematic symbol, PCB footprint, and 3D model.

The TLV3603DCKT is a 2.5 ns ultra-fast rail-to-rail analog comparator from Texas Instruments with push-pull output, adjustable hysteresis, and an integrated latch function. Operating from -40°C to 125°C with a 5 mV maximum input offset voltage, it suits high-speed signal detection in compact designs. Available in a 6-pin SC-70 package, in stock worldwide with fast shipping.