Texas Instruments

TPS22917LDBVR is a high-efficiency load switch IC from Texas Instruments with 80 mΩ on-resistance and 10 nA ultra-low leakage current. It supports 1V to 5.5V input, 2A load current, and features adjustable rise time with adjustable output discharge in a 6-Pin SOT-23 package. Available worldwide with RoHS compliance.

Use the download button to access the LMK61A2-100M00SIAT schematic symbol, PCB footprint, and 3D model.

The TPS7A0233DBVR is a 200 mA nanopower LDO voltage regulator with an ultra-low 25 nA quiescent current, 205 mV typical dropout, and fixed 3.3 V output in a 5-pin SOT-23 package. Operates from 1.5 V to 6 V input across extended temperature range. From $0.90 in stock worldwide shipping.

TPS536C7B1RSLR is a voltage-mode PWM switching controller by Texas Instruments. Key specs: 4.5V to 18V input voltage range, 12V nominal input, 48-pin QFN package. From authorized distributors, in stock with worldwide shipping.

Battery Management High-side protector for single-cell Li-ion and Li-polymer batteries with 0-V charge disabled

The TMS320C28343ZAYT is a 32-bit C2000 digital signal controller by Texas Instruments delivering 200 MIPS with a hardware FPU, 260KB RAM, and an external memory interface in a 179-pin NFBGA package. It operates at 3.3V and targets -40 to 105 degrees C industrial applications. Available from stock with worldwide shipping.

DACx1001 20-Bit, 18-Bit, and 16-Bit, Low-Noise, Ultra-Low Harmonic Distortion, FastSettling, High-Voltage Output, Digital-to-Analog Converters (DACs)

Switching Voltage Regulators SIMPLE SWITCHER power converter 4.5-V to 36-V, 0.6-A, synchronous buck with 80-uA IQ

Texas Instruments LM3671TL-3.3/NOPB is a 2 MHz, 600 mA step-down DC-DC converter with 2.7V to 5.5V input range and fixed 3.3V output in a tiny 5-ball DSBGA package. Supports PWM and PFM modes for high efficiency.

Digital to Analog Converters - DAC 16B Ultr-Lo Pwr Vltg Out Dig to Ana Conv

High-current (380mA Typ), high-voltage (60V), operational amplifier

Use the download button to access the LMR54410FDBVR schematic symbol, PCB footprint, and 3D model.

Clock Buffer

Clock Clock Buffer IC 1:2 2 GHz 16-VFQFN Exposed Pad

Digital to Analog Converters - DAC

LED Lighting Drivers 4-V to 30-V input voltage, 1.5-A output current, synchronous buck LED driver with dimming options 6-VQFN-HR -40 to 85

The TPS92200D1RXLR is a synchronous buck LED driver from Texas Instruments accepting 4 V to 30 V input with up to 1.5 A output current, integrated PWM and analog dimming, single-channel control, and a compact 6-pin WSON package for LED lighting systems.

Clock Buffer Dual bank 2-channel output LVDS 1.8-V, 2.5-V, and 3.3-V buffer 16-VQFN -40 to 105

SP Amp Current Shunt Monitor Single 26V 10-Pin UQFN T/R

Switching Voltage Regulators 2.5/3.5A, 36 V Synchronous, 2.1MHz, Automotive Step Down DC-DC Converter 22-VQFN-HR -40 to 150

Use the download button to access the LM317LZ/LFT4 schematic symbol, PCB footprint, and 3D model.

Audio Amplifiers

TPS62088AYFPR is a forced-PWM step-down switching regulator by Texas Instruments accepting 2.4 V to 5.5 V input in a miniature 1.2 mm x 0.8 mm 6-ball BGA (WCS) package. It uses current/voltage-mode PWM control for stable regulation across load conditions at 5 V nominal input. Designed for wearables, IoT modules, and ultra-compact portable electronics requiring high-density power conversion.

TPS259260DRCR is a single-channel eFuse power protection IC supporting input voltages from 4.5 V to 13.8 V with a 5 A current rating in a 10-pin VSON package. It integrates an adjustable overcurrent threshold and back-to-back FET drive for robust protection. Suitable for servers, industrial equipment, and USB-C power delivery systems requiring precise electronic fusing.

Texas Instruments TMCS1101A1BQDRQ1 is an AEC-Q100 automotive-grade precision isolated Hall-effect current sensor with analog voltage bridge output in a surface-mount 8-SOIC package measuring 4.9 x 3.9 x 1.5 mm. It delivers high-accuracy isolated current measurement for EV and industrial applications.

24 Bit Analog to Digital Converter 2 Input 2 Sigma-Delta 20-TSSOP

Use the download button to access the CSD18513Q5AT schematic symbol, PCB footprint, and 3D model.

The TMUX7412FRRPR is a ±60 V fault-protected SPST analog switch IC with 500 MHz bandwidth, supporting supply voltages up to ±22 V in a 16-pin QFN package, designed for signal routing and protection in industrial and communication systems.

Non-Isolated DC/DC Converters 3A Power Module w/ 4.5V-14.5V Input

Use the download button to access the AM5748ABZXEA schematic symbol, PCB footprint, and 3D model.

Linear Voltage Regulator IC Positive Adjustable 1 Output 3A TO-263-5 Thin

ADC12H038CIWM is a Analog to Digital Converters - ADC for electronic system designs. Key details include 28 pins in Small Outline Packages from Texas Instruments. It supports industrial power rails, embedded control boards, instrumentation supplies, and maintenance replacement builds with worldwide sourcing support.

The TL431AILPR is an adjustable shunt voltage reference from Texas Instruments, offering precision output from 2.47 V to 36 V with up to 100 mA output current. It features tight initial accuracy and low noise, making it ideal for power supply regulation. Available from leading distributors with worldwide shipping.

Digital to Analog Converters - DAC Four-channel, 10-bit, VOUT and IOUT smart DAC with I C, SPI and Hi-Z out during power off 16-WQFN -40 to 125

The TLVH431CDBVTG4 is a low-voltage adjustable precision shunt voltage regulator from Texas Instruments, with output voltage adjustable from 1.24V to 18V and up to 80mA output current. It operates as a two-terminal voltage reference in a compact 5-pin SOT-23 package. Available in stock with worldwide shipping.

Texas Instruments SN74HCS573RKSR is an octal transparent D-type latch with 3-state outputs and Schmitt-trigger inputs in a 20-pin VQFN package. HC/UH family device with active-low output enable, -40°C to +125°C operation, and 50pF load drive capability. Available from stock worldwide with competitive pricing and fast shipping.

The TUSB7320RKMT is a SuperSpeed USB 3.0 dual-port xHCI host controller IC from Texas Instruments. It supports a maximum data transfer rate of 625MBps with PCI and I2C bus compatibility and a 50MHz clock. Available in a 100-pin QFN package with worldwide shipping.

2-Channel Dual ADC Pipelined 105Msps 14-bit Serial 48-Pin VQFN EP T/R

Conv DC-DC 8V to 40V Synchronous Step Down Single-Out 1.2V to 37V 5A 8-Pin(7+Tab) TO-263 T/R

PTPS25972ARPWR is a 7 A eFuse power protection IC by Texas Instruments with 2.7 V to 23 V input range and 10 mΩ on-resistance. Key specs: fast overvoltage and overcurrent protection, adjustable threshold, 8 A peak output current, 10-pin LCC package. Available from stock with worldwide shipping.

Use the download button to access the ISOW1044BDFMR schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPS61060DRBR is a single-channel LED boost driver capable of regulating up to 400mA switch current at a 1MHz switching frequency with a 15V output voltage. It provides efficient constant-current LED driving for backlighting and illumination applications. Available in an 8-pin SON package with worldwide shipping.

The TPS3870J4080DSERQ1 is an automotive-grade high-accuracy overvoltage reset IC with programmable time delay and manual reset from Texas Instruments. It monitors supply rails with a fixed 4.080V threshold in a compact 6-pin WSON package, rated from -40°C to 125°C. Available through authorized distributors globally with AEC-Q100 automotive qualification.

Use the download button to access the DAC8562SDSCR schematic symbol, PCB footprint, and 3D model.

DIP MODULE-5

UCC2818DTR is a current-mode power factor correction (PFC) controller IC by Texas Instruments, designed for active PFC front-end stages. Key specs: 10.3V to 18V supply range, PWM current-mode control, 16-pin SOIC package. From stock, in stock with worldwide shipping.

The THS4531IRUNR is an ultra-low power fully differential amplifier with rail-to-rail output from Texas Instruments. It features 2.7MHz bandwidth, 116dB nominal CMRR, and only 0.25mA supply current in a compact QFN package. Available with worldwide shipping at competitive pricing.

The TS3USB221ARSERG4 is a high-speed USB 2.0 1:2 multiplexer/demultiplexer switch IC with integrated ESD protection. It features 900 MHz bandwidth, 2 channels, and supports up to 5.5V input. Available from Texas Instruments in a compact 10-pin QFN package with worldwide shipping.

The TCAN1046AVDMTRQ1 is an automotive-grade dual-channel CAN FD transceiver from Texas Instruments in a 14-pin SOIC-No-Lead package, featuring 1.8V IO support, standby mode, and AEC-Q100 qualification for multi-network automotive ECUs. From $2.50, in stock, worldwide shipping.

TO-92-3