Texas Instruments

The THVD1426DR is a 3.3V to 5V, 12-Mbps half-duplex RS-485/RS-422 transceiver from Texas Instruments with auto-direction control. Features differential Schmitt-trigger inputs and ±12-kV IEC ESD protection for robust industrial communication. Available in an 8-pin SOIC package, in stock worldwide with fast shipping.

Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 10A 26-PowerVFQFN

TLV1811LDBVR is a single push-pull output voltage comparator by Texas Instruments in a compact SOT-23 5-pin package. Key specs: 1.2 µA max bias current, 4 mV max input offset voltage. In stock worldwide with competitive pricing.

Current Sense Amplifiers Enhanced product 40 -V bidirectional u

600V 30mΩ 1.2A GaN FET With Integrated Driver, Protection, and Temperature Reporting 54-VQFN (12x12).

Analog to Digital Converters - ADC Automotive, three-channel, 24-bit, 64-kSPS, simultaneous-sampling, delta-sigma ADC

TPS23730RMTT is a single-channel PoE Powered Device controller by Texas Instruments supporting IEEE 802.3at (PoE+) and 802.3bt standards in a 45-pin VQFN package. Key specs: 3-channel analog inputs, adjustable threshold, up to 90 W PoE class. Available from stock with worldwide shipping.

USB Interface IC Low emissions, full and low speed isolated USB repeater 16-SSOP -40 to 125

Audio D/A Converter ICs 2V RMS DIRECTPATH 10 6dB Audio Stereo DAC

TLV1811DBVR is a single-channel micropower high-voltage comparator by Texas Instruments with push-pull output in a 5-pin SOT-23 package. Key specs: 1.2 nA max input bias current, 4 mV max offset voltage, operating range -40°C to 125°C. Available in stock with worldwide shipping.

Dual Transmitter 14-Pin CDIP Tube

Precision Amplifiers Dual, DSBGA package, precision, micropower, high speed-to-power ratio low-bias-current RRIO op amp 9-DSBGA -40 to 125

Power Switch ICs - Power Distribution 2-ch, 5.5-V, 4-A, 25-m load switch with adj. rise time and output discharge 14-WSON -40 to 105

WIDE BANDWIDTH RRIO OP AMP IN WCSP

Digital Isolator 5000Vrms 6 Channel 50Mbps 50kV/µs CMTI 16-SOIC (0.295", 7.50mm Width)

100mA Voice Coil Motor Lens Driver with Ringing Compensation for Camera Autofocus custom-reels CUSTOM

UCC27624QDRQ1 is an automotive-grade dual-channel MOSFET/IGBT gate driver from Texas Instruments with 30 V rating and 5 A source/sink peak current per channel in an 8-pin SOIC package. It features Schmitt-trigger inputs, reverse current protection, and AEC-Q100 qualification for reliable switching in automotive power stages. Available from stock with worldwide shipping.

TPS62933ODRLR is a synchronous step-down DC-DC converter from Texas Instruments accepting 3.8 V to 30 V input and delivering regulated output via current-mode PWM control. It supports high-input-voltage industrial and automotive rails in a compact 8-pin SO flat-lead package. Suitable for 12 V and 24 V system power rails requiring efficient step-down conversion.

Flip Flops Octal D-type flip-flops with clear with Schmitt-trigger inputs

ARM® Cortex®-A72, ARM® Cortex®-R5F, C66x, C7x System On Chip (SOC) IC Automotive, AEC-Q100 2GHz, 1GHz, 1.35GHz, 1GHz 827-FCBGA (24x24)

TLV3602DGKR is a dual-channel high-speed rail-to-rail comparator from Texas Instruments with 2.5 ns propagation delay and push-pull outputs. It operates from a 2.7 V to 5.5 V supply with 5 mV input offset voltage in an 8-pin MSOP package. Available from stock with worldwide shipping.

Use the download button to access the ESD2CAN24DBZRQ1 schematic symbol, PCB footprint, and 3D model.

IC REG BOOST ADJ 2A 24WQFN

1.6-A, High-Efficency MicroSiP™ Step-Down Converter Module

Use the download button to access the SN74LXC1T45DBVR schematic symbol, PCB footprint, and 3D model.

TLV9004IDYYR is a quad rail-to-rail output operational amplifier from Texas Instruments with 1.6 mV maximum input offset voltage and 77 dB typical CMRR in a 14-pin TSSOP package. It operates from a wide supply range for cost-effective general-purpose signal conditioning in portable and industrial applications. Available from stock with worldwide shipping.

Isolated DC/DC Converters - SMD Mini 1W Iso Unreg DC/DC Converter

Current Sense Amplifiers Enhanced product, 40-V, bidirectional, ultraprecise current sense amplifier with picoamp IB & EN 8-SOT-23-THIN -55 to 150

Battery Management IC controlled, 18-V max input, 2-A single-cell battery charger with USB detection and ADC

Microprocessors - MPU Single-core 64-bit Arm Cortex-A53, quad-core Cortex-R5F, PCIe, USB 3.0 and security 441-FCBGA -40 to 105

TMUX1308QBQBRQ1 is an automotive-grade 8:1 single-ended analog multiplexer from Texas Instruments with 500 MHz bandwidth in a 16-pin QFN package. It meets AEC-Q100 qualification for reliable operation in harsh automotive environments up to 125°C. Available from stock with worldwide shipping.

Texas Instruments TMS570LS0714PZ is a 32-bit ARM Cortex-R4F safety MCU with floating-point unit running at up to 80 MHz in a Quad Flat Package. Supports JTAG boundary scan, DMA, ADC, and DAC for safety-critical real-time control. Available from stock with worldwide shipping.

Power Switch ICs - Power Distribution 2.7-V to 16-V, 10-A, 6-mohm load switch with fast overvoltage protection and current monitoring

32-bit Microcontrollers - MCU C2000 32-bit MCU 120-MHz 128-KB flash, FPU, TMU with CLA, AES and CAN-FD

Texas Instruments TMP5704357AZWTQQ1 is an automotive-grade 32-bit ARM Cortex-R5F MCU with 4 MB Flash, 80 MHz clock, and AEC-Q100 qualification in a 337-pin NFBGA package. It features integrated ADC, DMA channels, and 1.2 V/3.3 V dual-supply operation. Available in stock with worldwide shipping.

Microprocessors - MPU Internet of Things (IoT) and gateway SoC with Arm Cortex-A53-based object and gesture recognition

Analog Comparators Fast-response, reinforced, isolated differential comparator with open-drain and push-pull outputs

Switching Voltage Regulators 2.7-V to 6-V, 3-A, adjustable-frequency, step-down converter in SOT-583 package

Digital Isolators Automotive, 120-uA, ultra-low power, four-channel digital isolator

Texas Instruments TPS259241DRCR is a single-channel 5 A eFuse protection IC with adjustable overcurrent threshold and 4.5 V to 13.8 V input range in a compact 10-pin VSON 3x3 mm package. It provides electronic fuse protection for power distribution circuits. Available in stock with worldwide shipping.

The TMUX7348FRTJR is a fault-protected 8:1 analog multiplexer from Texas Instruments with ±60 V fault protection, 150 MHz bandwidth, and 1.8 V logic compatibility. It offers latch-up immunity and a fault threshold feature. From $1.80, in stock worldwide shipping.

Texas Instruments TMUX7349FRTJR is a dual 4:1 fault-protected analog multiplexer with ±60V fault protection, 150MHz bandwidth, and 1.8V logic compatibility in a QFN-20 package. It provides latch-up immunity and a programmable fault threshold for robust high-voltage signal routing in industrial and test systems.

Display Drivers & Controllers DLP® 0.45 WXGA DMD 80-CLGA 0 to 70

Precision Amplifiers

Use the download button to access the AM6254ATCGGAALW schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPS63807YFFR is a 2 A current-mode buck-boost converter with an ultra-low 11 µA quiescent current, supporting a 1.3 V to 5.5 V input range in a 15-ball BGA package. Seamless buck-boost transitions keep output stable as the battery discharges through the regulated voltage. Available in stock globally for immediate worldwide shipment.

Translation - Voltage Levels Dual-bit dual-supply bus transceiver with configurable voltage translation 8-VSSOP -40 to 125

Use the download button to access the LM324LVIDYYR schematic symbol, PCB footprint, and 3D model.

INST Amp Single R-R O/P ±2.75V/5.5V

The TMUX7411FRRPR is a quad-channel, fault-protected SPST analog switch from Texas Instruments with ±60 V fault protection, 500 MHz bandwidth, and 1.8 V logic compatibility. Housed in a 16-pin QFN package for high-reliability signal routing in test and measurement designs. From $2.20 in stock with worldwide shipping.