Texas Instruments

Texas Instruments WL1805MODGBMOCT is a certified Bluetooth RF module in a 100-ball LGA package designed for IoT and wireless connectivity applications. It integrates a complete Bluetooth radio with antenna in a compact SMD form factor supporting multi-Mbps data rates. Available from stock worldwide with competitive pricing.

TMUX7308FPWR is a fault-protected 8-to-1 single-ended analog multiplexer with ±60 V overvoltage protection and 80 MHz bandwidth. Supports 1.8 V logic control with ±15 V analog supply for precision signal routing in industrial and test equipment. Available in 16-pin SOP package with worldwide shipping.

Texas Instruments TLV4041R1YKAR is a low-power voltage comparator with integrated reference and push-pull output in a 4-pin DSBGA package. Features 0.005 µA bias current and 4000 µV maximum input offset voltage for precise threshold detection. Operating from -40°C to 125°C, available in stock worldwide.

Internet of Things (IoT) and gateway SoC with Arm® Cortex®-A53-based object and gesture recognition

TPS61050DRCR is a high-power white LED driver IC by Texas Instruments delivering up to 1.2 A peak switch current with serial interface control. Key specs: 1-channel boost LED driver, serial (I2C-compatible) dimming control, WSON-10 package. Available from stock with worldwide shipping.

TPS54428DRCR is a 4 A synchronous step-down DC-DC converter from Texas Instruments supporting 4.5 V to 18 V input. Voltage-mode PWM control enables precise, efficient power regulation in industrial and telecom applications. Available from stock with worldwide shipping.

The DRV8300 is a three-phase brushless DC motor gate driver IC from Texas Instruments supporting external N-channel MOSFETs with integrated bootstrap charging and protection features. It operates from 6 V to 60 V and provides 1 A gate drive current for switching up to 100 V MOSFETs. Available from authorized distributors with worldwide shipping.

Buffers & Line Drivers Automotive single-su pply quadruple buffe

Use the download button to access the TPS259814ARPWR schematic symbol, PCB footprint, and 3D model.

Texas Instruments

Digital to Analog Converters - DAC Two-channel, 12-bit, input- and output-voltage smart DAC with IC, SPI and high impedance out during

TPS7A1011PDSER is a 300 mA ultra-low quiescent current LDO voltage regulator by Texas Instruments with 0.75 V minimum input. Key specs: 1.6 V to 3.3 V input, 90 mV max dropout, enable pin, 6-pin WSON package. From $0.55, in stock with worldwide shipping.

Use the download button to access the TPS63021DSJT schematic symbol, PCB footprint, and 3D model.

Operational Amplifiers - Op Amps Quad, 14-MHz, MUX-friendly, zero-drift RRO, precision operational amplifier 14-SOIC -40 to 125

Analog Switch ICs 44V, low-RON, 2:1 (SPDT) two-channel precision switch with latch-up immunity and 1.8V logic 16-WQFN -40 to 125

Shift Register Single 8-Bit Serial/Parallel to Serial 16-Pin WQFN EP T/R, 2V ~ 6V, -40°C ~ 125°C, BQB0016A

IC AMP GENERAL PURPOSE 20SOIC

Power Switch ICs - Power Distribution 5.5-V, 2-A, 60-mohm, 10-nA leakage load switch with output discharge 4-DSBGA -40 to 85

OR Gate IC 1 Channel 6-SON (1.45x1),Single 3-input, 1.65-V to 5.5-V OR gate

3.3-V ABT Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

Non-Isolated PoL Module DC DC Converter 2 Output 0.25 ~ 1.52V 0.25 ~ 1.52V 120A, 40A 8V - 14V Input

UCC27282DRMR is a 3 A, 120 V half-bridge gate driver from Texas Instruments with 5 V UVLO, interlock, and enable functions. It drives both high-side and low-side MOSFETs at up to 3 A peak current in an 8-pin WSON package for power conversion designs. From $1.50 in stock with worldwide shipping.

High Speed Operational Amplifiers Dual-channel, wideband, high-power output, current feedback amplifier

LED Lighting Drivers 4 18 LED matrix driver with 8-bit analog and 8-/16-bit PWM dimming

NIC Network Interface Controller

Buffer, Non-Inverting 6 Element 6 Bit per Element 3-State Output 16-SOIC

Counter Shift Registers Automotive 8-bit ser ial-in/parallel-out

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 2.5V 10A 2.95V - 3.65V Input

Counter Shift Registers

Texas Instruments TL496CDR is a voltage-mode pulse-frequency modulation step-up switching regulator with fixed 9 V output, 1.1 V to 20 V input range, and up to 1.2 A output current, packaged in an 8-pin SOIC for compact boost converter designs. Available worldwide.

MOSFET 30V,NCh NexFET Pwr MOSFET

EMI Filter Circuits 6Ch EMI Filter for Display Interface

TLV3601DBVR is a 2.5 ns ultra-high-speed rail-to-rail comparator with push-pull output by Texas Instruments in a 5-pin SOT-23 package. Key specs: 2.5 ns propagation delay, 5 µA maximum bias current, -40°C to 125°C operating range. Available in stock with worldwide shipping.

TPS62A02ADRLR is a voltage-mode PWM step-down switching regulator by Texas Instruments with 2.5 V to 5.5 V input range. Key specs: 5 V nominal input, SOT-23-6 package, 28 verified parameters. From $0.50, in stock with worldwide shipping.

24-V abs max, 3 to 20-V, three-phase brushless-DC motor driver with integrated FETs

Hot Swap Voltage Controllers

PTH12030LAS is a non-isolated DC-DC power module from Texas Instruments accepting a 12 V input and delivering an adjustable 0.8 V to 1.8 V output at up to 26 A. It achieves up to 89% efficiency in voltage-mode control with remote shutdown capability, suitable for powering FPGAs, ASICs, and processors in telecom and networking equipment.

The UCC5350SBQDRQ1 is an automotive-qualified, single-channel isolated gate driver with 8.5 A peak output current and 3000 Vrms capacitive coupling isolation. It drives IGBTs and MOSFETs via a push-pull output from a standard input interface in an 8-pin SOIC package. AEC-Q100 qualified for automotive traction inverters and industrial power conversion.

High Precision, Low Noise OPERATIONAL AMPLIFIERS

Hot Swap Voltage Controllers Automotive reverse polarity protection controller, overvoltage protection, gate drive strength 60 A

Digital Isolators General-purpose, quad-channel, 2/2 digital isolator

Analog Comparators Fast-response, reinforced, isolated window comparator with adjustable threshold and latch function

Use the download button to access the AMC23C12QDWVRQ1 schematic symbol, PCB footprint, and 3D model.

NAND Gate IC 4 Channel Schmitt Trigger Input 14-WQFN (3x2.5)

TMS320C6748EZWTD4 is a high-performance 32-bit fixed/floating-point DSP from Texas Instruments, featuring a C674x core at up to 456 MHz clock speed, 256 KB on-chip RAM, and rich peripherals in a 361-ball NFBGA package. From $25 in stock worldwide shipping.

Use the download button to access the TLVH431BQPK schematic symbol and PCB footprint.

SSOP-30

LMR436x0-Q1, 36-V, 1-A/2-A Buck Converter with <2.5 µA IQ at 150°C TJMAX in 4-mm2 HotRod™ QFN

TO-220, 5 PIN

Operational Amplifiers - Op Amps Automotive 16-V, 1-channel 4.5-MHz, rail-to-rail in/output, low offset voltage, low-noise op amp