Texas Instruments

Use the download button to access the INA236AIYBJR schematic symbol, PCB footprint, and 3D model.

MOSFET 30V N-ch NexFET Pwr MOSFET

Motor / Motion / Ignition Controllers & Drivers 1.65-V to 11-V, 4-A, dual H-bridge motor driver with current regulation

OPAx607 50-MHz, Low-Power, Rail-to-Rail Output CMOS Operational Amplifier for Cost Sensitive Systems, CMOS Amplifier 2 Circuit Push-Pull 10-X2QFN (2x1.5)

LM4040-N/-Q1 Precision Micropower Shunt Voltage Reference

The SN74LXC1T45QDRYRQ1 is an automotive-grade, single-bit dual-supply bus transceiver with configurable voltage-level shifting. It supports bidirectional data translation between voltage domains from 1.65V to 5.5V with ultra-low power consumption. Available from major distributors with worldwide shipping.

Operational Amplifiers - Op Amps 800-MHz, high-precision unity-gain-stable FET-input operational amplifier

The TLV3801QDSGRQ1 is an automotive-grade, ultra-high-speed comparator with LVDS outputs featuring 225 ps propagation delay and 10 µA maximum bias current. Ideal for high-frequency signal processing in AEC-Q100 qualified automotive applications. Available in compact 8-pin WSON package from Texas Instruments with worldwide shipping.

Non-Isolated DC/DC Converters 50-A 8-14V-Inp Wide Out Adj Pwr Module

Board Mount Hall Effect / Magnetic Sensors Auto Analog-Bipolar Hall Effect Sensor

Audio Amplifiers SoundPlus ultra-low noise and distortio

Battery Management 3-series to 7-series cell Li-ion battery, internal delay timer, voltage and temperature protector

Instrumentation Amplifiers Fully differential instrumentation amp, low noise (3.2 nV/vHz), high-speed (22 MHz) and OVP (+/-40 V)

The Texas Instruments UCC27284DRCT is a 3A, 120V half-bridge gate driver with a gated Schmitt trigger input, 5V UVLO, and enable pin in a compact 10-pin VSON package. It operates from -40 to 125°C and supports two channels for driving high- and low-side MOSFETs. Available from stock with worldwide shipping at competitive pricing.

The Texas Instruments TPS61376RYHR is a current-mode PWM boost converter rated at 25V output and 4.5A with 2.5% accuracy input average current limit and true output disconnection in a compact 13-pin WQFN package. It accepts a wide 2.9V to 23V input range with 5V nominal and is optimized for high-efficiency power conversion in battery-powered and industrial systems. Available from authorized distributors worldwide with competitive pricing and ready stock for immediate shipment.

Voltage References 650-nA quiescent current, 12-ppm/C drift, ultra-low-power precision voltage reference

Standard Clock Oscillators 148.5-MHz, LVDS, high-performance, low jitter, differential oscillator 6-QFM -40 to 85

Board Mount Hall Effect / Magnetic Sensors Auto Digital-Latch Hall Effect Sensor

The Texas Instruments TMUX4051PWR is a precision 8:1 single-channel analog multiplexer supporting +/-12V dual supplies and 400MHz signal bandwidth with 1.8V-compatible logic control in a 16-pin TSSOP package. Rated -55 to 125 degrees C. Available from stock with worldwide shipping.

The Texas Instruments TPSM82903SISR is a 3A adjustable buck power module with integrated inductor, accepting 3V to 17V input and regulating output from 0.4V to 5.5V at 2.5MHz switching frequency over a -40°C to +125°C junction temperature range. Its LDFN-10-EP package integrates all switching components for minimal external BOM. Available in stock worldwide with fast global shipping.

Texas Instruments TLV76708DGNR is a fixed-output 1A, 16V low-dropout (LDO) linear regulator with only 0.9V typical dropout and -40C to 125C operating range. Provides accurate, low-noise voltage regulation for analog and mixed-signal applications. Available in compact 8-pin HVSSOP package from stock with worldwide shipping.

Current Sense Amplifiers -5-V to 110-V bidirectional high-precision current sense amplifier with enhanced PWM rejection

The Texas Instruments TMUXHS4412IRUAR is a 4-channel 20Gbps high-speed differential 2:1/1:2 multiplexer/demultiplexer in a 42-WQFN package. It supports a nominal bandwidth of 13GHz and operates over -40 to 105°C, making it ideal for high-speed signal routing. Available in stock with worldwide shipping.

Isolated Gate Drivers 4-A/6-A, 2.5-kVRMS dual-channel isolated gate driver with 5-V UVLO, dual input, LGA package 13-VLGA -40 to 125

NE567 is a highly stable tone decoder and frequency detector IC from Texas Instruments used to detect specific frequencies in audio and communications systems. It integrates a voltage-controlled oscillator, quadrature phase detector, and output driver in an 8-pin DIP package. Available competitively priced and in stock worldwide with fast shipping.

The TPS389001DSET is a low-quiescent current voltage supervisor and reset IC from Texas Instruments with 1% threshold accuracy and adjustable reset delay. It operates over a -40°C to 125°C extended temperature range with a programmable threshold in a compact 6-pin WSON package. RoHS compliant and available in stock with worldwide shipping.

Current Sense Amplifiers -5-V to 110-V bidire ctional high-precisi

Operational Amplifiers - Op Amps Quad, 5.5-V, 3-MHz, high-output-current (150 mA), fast-shutdown (1 s) operational amplifier

Operational Amplifier, 2 Func, 36000uV Offset-Max, BIPolar, PDSO16

The Texas Instruments LM74721-Q1 is an automotive-qualified, TVS-less ideal diode controller with ultra-low quiescent current for reverse battery protection and active rectification. It drives an external N-channel MOSFET to replace diode-based protection with near-zero voltage drop, supporting systems up to 65 V. Available in stock worldwide with competitive pricing and fast shipping.

Texas Instruments BQ24100RHLT is a 4.5A Li-Ion battery charge controller with pulse-width modulation control, operating from 4.35 V to 16 V input. Features integrated power management in a compact QFN-20 package (3.50 x 4.50 mm). Available from stock with worldwide shipping.

Non-Isolated DC/DC Converters 6A 5V-In Wide Adj Module w/Auto-Trk

Use the download button to access the INA241A3IDDFR schematic symbol, PCB footprint, and 3D model.

The TMUX7436FPWR is a Texas Instruments ±60V fault-protected dual 2:1 differential multiplexer with 220MHz bandwidth and 1.8V logic compatibility in a 16-pin SOIC package. It features latch-up immunity and wide supply voltage range from -22V to positive rails for robust signal routing in high-voltage systems. Available from authorized distributors with worldwide shipping.

Isolated Module DC DC Converter 1 Output 5V 400mA 10.8V - 13.2V Input

Texas Instruments DP83848I is an industrial-temperature single-port 10/100 Mbps Ethernet PHY transceiver in a 48-pin PQFP package operating at 3.3 V. Supports MII and supports -40°C to 85°C industrial range. From $3 in stock worldwide shipping.

TUSB212RWBT is a USB 2.0 signal conditioner IC from Texas Instruments designed to improve signal integrity on USB lines. It supports single-channel operation in a compact 12-pin QFN package with RoHS-compliant, Pb-free construction. Available in stock worldwide with competitive pricing and fast shipping.

Texas Instruments TPS48110AQDGXRQ1 is an automotive-grade high-side gate driver with integrated protection and diagnostics supporting 3.5V to 80V input range in a 19-pin VSSOP package. It features an adjustable threshold, single-channel operation, and operates across -40°C to +125°C temperature range for harsh automotive environments. Available in stock from Texas Instruments with worldwide shipping.

The SN76477N is a complex sound synthesizer IC from Texas Instruments designed for generating a wide variety of electronic sound effects using external RC and voltage control components. It operates from a supply voltage up to 10V and integrates multiple functional blocks including noise generation, oscillators, and envelope control in a single 28-pin DIP package. Available from specialty distributors and vintage component suppliers with worldwide shipping.

Use the download button to access the DRV8244HQRYJRQ1 schematic symbol, PCB footprint, and 3D model.

TPA3223DDVR is a high-power Class-D audio amplifier IC from Texas Instruments supporting 200 W stereo or 400 W mono output. It operates from a 10 V to 45 V supply with 36 dB gain, 108 dB SNR, and analog input in a 44-pin HTSSOP package. Available in stock worldwide with competitive pricing and fast shipping.

Bus Transceivers Automotive single-bit dual-supply bus transceiver 6-SON -40 to 125

Use the download button to access the ESD2CAN24DCKRQ1 schematic symbol, PCB footprint, and 3D model.

Texas Instruments TPS25961DRVR is a single-channel eFuse with adjustable overcurrent threshold operating from 2.7V to 19V input. It provides electronic fuse protection with fast fault response for power integrity in sensitive systems. Available in 6-pin WSON package with worldwide shipping.

Microprocessors - MPU Single-core 64-bit Arm Cortex-A53, dual-core Cortex-R5F, PCIe, USB 3.0 and security 441-FCBGA -40 to 105

Analog Comparators Vtg Comparator

TL32088CNS is a dual differential analog buffer amplifier with 7MHz bandwidth and 0.25µA maximum bias current in a 20-pin small outline package. Features 7.5mV maximum input offset voltage for accurate signal buffering in precision analog circuits. Available from Texas Instruments with worldwide shipping.

Motor / Motion / Ignition Controllers & Drivers Automotive 40-V, four-channel half-bridge smart gate driver with inline current sense amplifier 48-HTQFP -40 to 125

LDO Voltage Regulators 300Ma General CMOS L DO Reg A 926-LP3982ILDX18NOPB

Texas Instruments ADS1293CISQX/NOPB is a low-power, integrated 3-channel analog front-end IC designed for biopotential signal acquisition such as ECG and EEG. It integrates a PGA, ADC, and lead-off detection in a 28-pin QFN package with input voltage up to 0.4 V. Available in stock with worldwide shipping.