TMUX7411FRRPR Texas Instruments Integrated Circuit (Quad Flat No-Lead) In Stock
The TMUX7411FRRPR is a quad-channel, fault-protected SPST analog switch from Texas Instruments with ±60 V fault protection, 500 MHz bandwidth, and 1.8 V logic compatibility. Housed in a 16-pin QFN package for high-reliability signal routing in test and measurement designs. From $2.20 in stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Quad Flat No-Lead
- Pin Count
- 17
- Lifecycle
- ACTIVE
- Datasheet
- TMUX7411FRRPR Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $3.7800(MOQ 25)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- ±60 V fault protection on all 4 signal inputs survives accidental overvoltage in test equipment and industrial instrumentation without device damage
- 500 MHz -3 dB bandwidth enables high-speed signal routing for RF, video, and high-frequency analog signals with minimal insertion loss
- 1.8 V logic control inputs are compatible with modern low-voltage MCUs and FPGAs, while the analog signal path handles ±15 V supply rails
Applications
The TMUX7411FRRPR is designed for test and measurement equipment, analog multiplexers, and industrial signal routing systems that must tolerate accidental overvoltage conditions up to ±60 V on the signal lines. Its 4-channel SPST configuration and 500 MHz bandwidth make it well-suited for relay replacement in automated test equipment (ATE) and oscilloscope front-end switching. The 1.8 V logic compatibility also allows direct interfacing with modern low-voltage digital controllers in medical instruments and industrial field-bus signal conditioning circuits.
Specifications
| Pbfree Code | Yes |
| YTEOL | 15 |
| Additional Feature | Configuration : 1:1 SPST |
| Analog IC - Other Type | SPST |
| Bandwidth-Nom | 500MHz |
| JESD-30 Code | S-PQCC-N16 |
| JESD-609 Code | e4 |
| Neg Supply Voltage-Max (Vsup) | -22 V |
| Neg Supply Voltage-Min (Vsup) | -5 V |
| Neg Supply Voltage-Nom (Vsup) | -15 V |
| Normal Position | NO |
| Number of Channels | 4 |
| Number of Functions | 1 |
| Off-state Isolation-Nom | 60dB |
| On-state Resistance Match-Nom | 0.06Ω |
| On-state Resistance-Max (Ron) | 17Ω |
| Output | SEPARATE OUTPUT |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC16,.16SQ,25 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Current-Max (Isup) | 1mA |
| Supply Voltage-Max (Vsup) | 22V |
| Supply Voltage-Min (Vsup) | 5V |
| Supply Voltage-Nom (Vsup) | 15V |
| Surface Mount | YES |
| Switch-off Time-Max | 150ns |
| Switch-on Time-Max | 710ns |
| Switching | BREAK-BEFORE-MAKE |
| Technology | CMOS |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.65mm |
| Terminal Position | QUAD |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.90 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for TMUX7411FRRPR:
Frequently Asked Questions
How does the ±60 V fault protection in the TMUX7411FRRPR protect downstream analog circuitry?
The TMUX7411FRRPR includes integrated fault protection circuitry that clamps input voltages outside the ±60 V range without damaging the device or passing the fault to downstream components. When the switch is open or power is off, the signal path remains blocked and the ±60 V overvoltage condition is absorbed internally, protecting sensitive ADC inputs and op-amp stages connected to the switch output.
What signal bandwidth can the TMUX7411FRRPR pass, and how does it perform compared to mechanical relays in high-frequency switching?
The TMUX7411FRRPR achieves a -3 dB bandwidth of 500 MHz, far exceeding the typical 10 MHz to 100 MHz bandwidth of mechanical relays. Its on-resistance of approximately 10 Ω and low capacitance allow it to switch RF and video signals up to 500 MHz with minimal signal distortion, while also offering microsecond switching speed versus the 5 ms to 20 ms mechanical relay transition time.
Can the TMUX7411FRRPR operate with a single-supply voltage and how does it handle rail-to-rail analog signals?
The TMUX7411FRRPR supports both dual-supply operation from ±5 V to ±15 V and single-supply operation from 5 V to 40 V. In dual ±15 V supply mode, the analog signal path can handle input voltages from -15 V to +15 V rail-to-rail, making it suitable for passing bipolar analog signals in instrumentation amplifiers and audio switching circuits without clipping or distortion.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 25+ | $6.0008 | $150.02 |
| 100+ | $5.4838 | $548.38 |
| 250+ | $5.3550 | $1338.75 |
| 500+ | $4.4900 | $2245.00 |
| 1000+ | $4.4400 | $4440.00 |
| 3000+ | $3.7800 | $11340.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”